GoMax Electronics MX-3004 Manuale utente

3G/HD/SD-SDI Quad-view

Video Processor

User Manual

X-

-3

The MX-3004 3G/HD/SD-SDI Quad-view Video Processor has been tested for conformity to safety

regulations and requirements, and has been certified for international use. However, like all

electronic equipments, the MX-3004 should be used with care. Please read and follow the safety

instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

●Follow all instructions and warnings marked on this unit.

●Do not attempt to service this unit yourself, except where explained in this manual.

●Provide proper ventilation and air circulation and do not use near water.

●Keep objects that might damage the device and assure that the placement of this unit is on a

stable surface.

●Use only the power adapter and power cords and connection cables designed for this unit.

●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device

before cleaning.

TABLE OF CONTENTS

INTRODUCTION..................................................................................................................... 1

FEATURES............................................................................................................................. 1

PACKAGE CONTENTS.......................................................................................................... 1

SPECIFICATIONS.................................................................................................................. 2

PANEL DESCRIPTIONS........................................................................................................ 3

APPLICATION DIAGRA ......................................................................................................... 4

HARDWARE INSTALLATION................................................................................................ 5

OPERATION SOFTWARE..................................................................................................... 6

TROUBLE SHOOTING......................................................................................................... 17

LIMITED WARRANTY.......................................................................................................... 18

INTRODUCTION

The MX-3004 3G/HD/SD-SDI Quad-view Video Processor is an advanced video processor for

multimedia presentations. It is an ideal solution for some applications such as surveillance, where up to

four SDI video signals must be displayed on a single display. It supports up to 4 SDI video inputs, of which

four can be outputted simultaneously with the desired display layout through software control. The

advanced video processor allows you to manipulate output images, wherever positions and whatever

sizes you want for viewing two computers or two video signals or a combination.

The embedded processor converts signals from input sources to match the native resolution of

monitors, flat panel displays, projectors as well as user-selectable output settings up to WUXGA

(1920x1200). Dual outputs are provided in both digital (SDI) and digital (DVI) format, one is connected to

remote display and the other is connected to on-site display for real time monitoring.

FEATURES

Supports 3G/HD/SD SDI video formats

Input resolutions support interlaced or progressive video under SMPTE.

Dual outputs DVI(640x480 to 1920x1200) / SDI(720P, 1080P)

Each SDI channel has 1 re-clocked SDI loop-outs.

Adjustable size& position through software.

Image parameters and layouts are automatically saved in flash memory and can be recalled

for later use.

User-selectable output settings, up to 1920x1200(Only for DVI).

Perfectly as a video screen splitter, a video converter and a video switcher.

Firmware upgradable for support of new features and technology enhancements.

Software control through RS-232.

Control protocol available for customer proprietary design

1U size.

PACKAGE CONTENTS

1x MX-3004

1x USB to RS-232 cable

2x 1U rack mounting-ear

1x Installation software CD

1x UL 12V power adapter

1x UL AC power cord

1x User Manual

SPECIFICATIONS

Model Name

MX-1004S

MX-3004

Technical

Role of usage

Multiplexer / video processor

Dual output support

Yes [DVI & VGA]

Yes [DVI & SDI]

Background video

input

Video bandwidth

Composite [13.5MHz]

SDI [2.97Gpbs & 2.97/1.001Gbps]

DVI/HDMI[165MHz]

SDI 3G/HD/SD

Video Input support

480i / 576i/ 720p / 1080i / 1080p

Audio support

Control

RS-232 and RS-485

RS-232 and Ethernet

Embedded video mixer

Yes

Cascadable

Input TMDS signal

N/A

1.2 Volts [peak-to-peak]

ESD protection

Human body model —±19kV [air-gap discharge] & ±12kV [contact discharge]

PCB stack-up

6-layer board [impedance control -

differential 100; single 50]

Input

4x SDI or CVBS

1x RS-232 + 2x RS-485

4x SDI

1x RS-232 + 1x RJ-45

Output

8 x SDI Loop-out + 1x DVI + 1x VGA

1x DVI + 2x SDI

DVI connector

DVI-I [femal,29-pin]

BNC connector

75inter-locked socket

VGA connector

HD-15 [15-pin D-sub female]

RS-232 connector

DE-9 [9-pin D-sub female]

RCA connector

75female

RJ-45 connector

WE/SS 8P8C with 2 LED indicators

Mechanical

Housing

Metal enclosure

Dimensions

(L x W x H)

Model

300 x 440 x 44mm [11.8" x 1'5.3" x 1.7"]

170 x 440 x 45mm [6.7" x 1'5.3" x 1.8"]

Package

528 x 398 x 130mm [1'9" x 1'4" x 5.1"]

310 x 525 x 155mm [1’0.2”x1’8.7”x6.1”]

Carton

548 x 422 x 282mm [1'10" x 1'5" x 11.1"]

570 x 580 x 260mm [1’10.5”x1’10.9”x10.2”]

Weight

Model

3800g [8.4 lbs]

2100g [4.6 lbs]

Package

5900g [13.0 lbs]

5000g [11 lbs]

Fixedness

1RU rack-mount with ears

Power supply

AC Power 100-240V

Power consumption

35 Watts [max]

Operation temperature

0~40C [32~104F]

Storage temperature

-20~60C [-4~140F]

Relative humidity

20~90% RH [no condensation]

PANEL DESCRIPTIONS

Front Panel

Rear Panel

1. Power Indicator

2. Power On/Off

3. RS-232

4. +12V DC

The MX-3004 has 4 SDI and user can display four of them simultaneously on the same screen.

Figure 2 shows the rear panel connectors of a MX-3004 and Table 1 illustrates how you can connect

video devices and display to the MX-3004.

TABLE 1: I/O CONNECTORS

Input Connector

Video Source

DVI-x [x = 1~4]

[1] SDI: SD/HD/3G

Output Connector

Display

DVI-I OUT

[1] DVI display

[2] SDI*2 display

*Default: Turn on the MX-3004 then switch the circled DIP switch simultaneously up and down to

factory default mode.

*These IO ports support various resolutions from 480i up to 1920x1080p, for more details of the

supported modes, please refer to the Appendix –Supported Resolution.

5. Factory Reset

F/W Default

6. Device ID

7. USB

8. Ethernet

9. SDI output

10. DVI output

11. SDI input

12. SDI local loop out

APPLICATION DIAGRA

HARDWARE INSTALLATION

Safety Precautions

1. To prevent fire or shock hazards, do not expose this device to rain or moisture.

2. The product should be placed more than one foot away from heat sources such as radiators, heat

registers, stoves, and other products (including amplifiers) that produce heat. In addition, do not cover

any material or devices on the top of the device.

3. Do not use immediately after moving from a low temperature to high temperature, as this causes

condensation.

4. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious

injury to a child or adult and serious damage to the product.

5. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

6. Do not allow the same still picture to be projected for a long time or an abnormally bright video picture

to be projected. The video image could be burned in to the display device.

Installation Procedures

Unpacking

Remove the MX-3004 from the shipping container and examine it for any signs of shipping damage

or missing items (check with package contents above). All shipping items should be saved if the product

is to be moved or returned for service. Shipping unit back to dealers for service not in the original box

may result in voiding warranty or additional cost.

Placement

The unit uses convection to cool. A fan is not needed, so do not block the sides of this device or

stack another device on the top or bottom of the MX-3004.

Connections

We recommend the highest quality cables for both input and output connections.

1. Switch off the MX-3004 and all devices that you want to connect.

2. Connect a monitor, a projector or other displays that comes with DVI / SDI inputs

3. Connect a device equipped with SDI output including SD/HD/3G to the BNC input connector of

MX-3004.

4. Connect a device equipped with composite video output to the BNC input connector of the MX-3004.

5. Connect your computer with the MX-3004 by a 9-pin RS-232 cable and then install the software.

6. Plug in AD power cord into AC power socket.

7. Execute the control software and establish the connection between PC/Laptop and MX-3004.

8. For detailed software control operation, please refer to the software instruction section.

OPERATION SOFTWARE

System Requirement and Precautions

1. The device provides a software control program, Quartet, which runs under Microsoft Windows 98,

2000, XP, Vista, 7 through the interface of RS-232 serial control.

2. Before you click the icon of the software, make sure you have secured the connection between your

computer COM port and the device and switched on the device with green LED light.

Support Software: V1.4 2014 –02 –18

Support Firmware: V1.7 2014 –02 –18

Start the Operation Software

When you click the .exe file, the below dialog will pop-up. You can use two ways to control device RS232

and TCP/IP (under Microsoft Windows 7, please setting this program as an administrator).

RS232 Mode: Push “RS232” button, the below dialog will pop-up. Select correct Com port. Click the

button to open the “Com Port” like right picture, then closing the dialog. If your setting is correct and the

device is ready. It will enter directly to control dialog.

TCP/IP Mode: Enter the device IP address and click the “Connect” Button. (How to set the IP address,

please refer the part “TCPConfig” of “Tool Bar List”).

After you select the connecting way to connect the device, it will be pop-up the window as below.

Instruction of Software Connection (connect with RS232)

1. PAP Panel: Display and adjust the window size and position.

2. Tool Bar List:

(1) : Get all information of the device and update this software state.

(2) Port setting: Pop-up the “Connect Select” dialog, user can select the connecting way.

(3) : TCP configure setting, we are recommend you to set with RS232.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali GoMax Electronics Convertitore multimediale

GoMax Electronics

GoMax Electronics MX-5004MZ2E-CF Manuale utente

GoMax Electronics

GoMax Electronics MT-503A Manuale utente

GoMax Electronics

GoMax Electronics CV-300 Manuale utente

GoMax Electronics

GoMax Electronics MX-3004F Manuale utente

GoMax Electronics

GoMax Electronics SP-2003 Manuale utente

GoMax Electronics

GoMax Electronics CV-105S Manuale utente

GoMax Electronics

GoMax Electronics SP-5008PZQ Manuale utente

GoMax Electronics

GoMax Electronics CV-509 Manuale utente

GoMax Electronics

GoMax Electronics CV-C03S Manuale utente

GoMax Electronics

GoMax Electronics SP-9112 Manuale utente

GoMax Electronics

GoMax Electronics MX-1010 Manuale utente

GoMax Electronics

GoMax Electronics CV-910S Manuale utente

GoMax Electronics

GoMax Electronics CV-35AK Manuale utente

GoMax Electronics

GoMax Electronics MX-5004MZF Manuale utente

GoMax Electronics

GoMax Electronics CV-523 Manuale utente

GoMax Electronics

GoMax Electronics VW-1404ZH-G Manuale utente

GoMax Electronics

GoMax Electronics CV-503MLR Manuale utente

GoMax Electronics

GoMax Electronics MX-1004PF Manuale utente

GoMax Electronics

GoMax Electronics CV-511 Manuale utente

GoMax Electronics

GoMax Electronics MX-5004MZ2-UF Manuale utente

GoMax Electronics

GoMax Electronics CV-513ZK-BI Manuale utente

GoMax Electronics

GoMax Electronics CV-503M Manuale utente

GoMax Electronics

GoMax Electronics SP-5008PZ Manuale utente

GoMax Electronics

GoMax Electronics MX-5004MZ2F Manuale utente

Manuali Convertitore multimediale popolari di altre marche

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuale utente

SPROLINK

SPROLINK VA1 Manuale utente

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuale utente

Nikon

Nikon AF-S TC-20E III Manuale utente

Axis

Axis AXIS Q7406 Manuale utente

Omega

Omega TAC80B-J Manuale utente

Zoom

Zoom Thunderbolt TAC-2R Manuale utente

OST

OST iConverter 10/100M Manuale utente

Vertiv

Vertiv Netsure Manuale utente

birddog

birddog MINI Manuale utente

Roland

Roland GI-10 Manuale utente

Wallenstein

Wallenstein WX310 Manuale utente

Pace

Pace MSS 200-1 Manuale utente

Solar Converters

Solar Converters EQ 12/24-50 Manuale utente

CYP

CYP EL-7400V Manuale utente

TIE

TIE MIDI 1i1o Manuale utente

DCS

DCS Vivaldi Upsampler Manuale utente

Westermo

Westermo MCW-211 SERIES Manuale utente