Gomax MX-5004V Manuale utente
MX-5004V
4x1 HDMI Quad-Viewer & Seamless Switcher
User Manual
rev: 200507
Made in Taiwan
TABLE OF CONTENTS
INTRODUCTION ............................................................................................................................. 1
FEATURES ....................................................................................................................................... 1
PACKAGE CONTENTS................................................................................................................. 1
SPECIFICATIONS ......................................................................................................................... 2
PANEL DESCRIPTIONS ............................................................................................................. 3
CONNECTION DIAGRAM........................................................................................................... 4
HARDWARE INSTALLATION.................................................................................................... 4
OPERATION APPROACH........................................................................................................... 5
WARRANTY....................................................................................................................................10
-1-
INTRODUCTION
The MX-5004V 4x1 HDMI Quad- Viewer & Seamless Switcher provides the most flexible and cost
effective solution in the market to route high definition video source from any of the four HDMI sources
to the remote display at the same time. Besides, this device supports a variety of video layout (5 default
modes) and seamless switching on one view mode. This solution is well suited for use in digital signage,
conference room presentation systems or other similar settings or applications.
With up to FHD output resolution, users can display the resulted mixed video with improved
presentation quality. In the meantime, the unit can be controlled thru the IR remote, software and push
button control to provide the most flexible control way to fit into any applications.
FEATURES
4 x HDMI inputs and 1 x HDMI output
Input resolution supports 480i/480p/576i/576p/720p/1080i/1080p
Output resolution supports 720p@60 & 1080p@60
Supports HDCP 1.4
Supports 5 Display Modes: One View Mode, Dual View Mode(left & right), Quad View Mode, Quad View
Cycled Mode, Quad View H mode
Supports seamless switching on one view mode
Supports audio extraction via stereo audio from selected HDMI input
Supports audio switch function
Supports cascading
Firmware upgradable for support of new features and technology enhancements.
Perfect as a video converter and a video switcher
Software control through micro-USB
Supports IR remote, software and push button control.
PACKAGE CONTENTS
1x MX-5004V
1x DC 5V 2A
1x Installation software CD
1x User Manual
1x IR Remote control (15 keys)
-2-
SPECIFICATIONS
Model Name
MX-5004V
Technical
Role of usage
Multi-viewer/ video processor
HDCP compliance
HDCP 1.4
Video bandwidth
HDMI [6.75Gbps]
Output Video Support
720p60/ 1080p60
Input Video Support
480i/480p/576i/576p/720p/1080i/1080p
Video Format Support
DVI/HDMI
Audio support
Bypass
Control
IR remote, software and push button control
Embedded video mixer
Yes
Input TMDS signal
1.2 Volts [peak to peak]
ESD protection
Human body model —±15kV [air-gap discharge] & ±8kV [contact discharge]
Input
4x DVI/HDMI + 1x micro-USB
Output
1x HDMI + 1x 3.5mm phone jack
HDMI connector
Type A [19-pin female]
USB connector
Micro-USB
HDCP compliance
HDCP 1.4
Mechanical
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
152 x 92 x 23mm [6" x 3.6" x 0.9"]
Package
198 x 137 x 74mm [7.8" x 5.4" x 2.9"]
Carton
420 x 400 x 300mm [1'4"x 1'3" x 11.8"]
Weight
Model
390g [13.7 oz]
Package
683g[1.5 lbs]
Fixedness
Wall-mounting case
Power supply
5V 2A DC
Power consumption
5 Watt [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
-3-
PANEL DESCRIPTIONS
1. Stereo output (3.5mm)
2. IR SENSOR: IR sensor for receiving the IR commands from IR remote
3. Dip Switch: [ON] Normal mode; [OFF] Firmware Update mode
4. Micro-USB: for software control or firmware update
5. Source Status LED: Input source detection LED (from the left to the right is input 4, input 3, input 2,
input 1)
6. One View mode: Switch source in one view (full screen) mode
7. Audio Switch: Switch stereo audio out from source 1-4 or mute
8. Quad View Cycled Mode: Switch source in quad view cycled mode
9. Default layout Modes: Switch 3 default layout modes (Dual View Mode(left & right), Quad View Mode,
Quad View H mode)
10. 1080p/ 720p: Switch output resolution in 1080p/ 720p
11. SOURCE 1-4: HDMI inputs (from the left to the right is input 1, input 2, input 3, input 4)
12. HDMI OUT: HDMI output
13. +5V DC: 5V DC power jack
-4-
CONNECTION DIAGRAM
HARDWARE INSTALLATION
MX-5004V as master
1. Connect all sources to DVI/HDMI Inputs on the MX-5004V.
2. Connect all displays to DVI/HDMI Outputs on the MX-5004V.
3. Connect the +5V 2A DC power supply to the MX-5004V.
-5-
OPERATION APPROACH
Method A: IR Remote Control
Button
Function
POWER
Power ON/OFF the device
F1
Reserved
F2
Reserved
IN 1
Input 1 in one view mode
IN 2
Input 2 in one view mode
IN 3
Input 3 in one view mode
IN 4
Input 4 in one view mode
Quad-view mode
Dual view mode (left & right) 1
Quad view H mode
Dual view mode (left & right) 2
INFO
Display layout/audio information of device
MUTE
Turn on/off output’s video and audio
Switch stereo audio from source 1-4
Switch source in quad-view mode
-6-
Method B: Software Control through Micro-USB port
1. System Requirement
(1) OS Information: MS Win XP/7/8/10
(2) Baud rates: 115200
(3) Software size: 3KB
(4) Minimum RAM requirement: 256 MB
2. Control Interface
Before clicking on the icon of the software, make sure you have secured the connection between
your computer COM port and the MX-5004V.
When clicking on the software control program, the following window will pop-up (under Microsoft
Windows 7, please run as administrator.)
After you clicking the OK button, it will enter directly to the control interface (Please click
DISCONNECTED button to connect the software),
-7-
1
Refresh
2
COM Port Selection & Connection Status
3
Factory Reset
4
Video Switch –Full Screen (One View Mode)
5
Video Switch –Quad View Mode
6
Video Switch –Dual View Mode
7
Audio Switch
8
Input Information
9
Output Resolution
10
System Update
1
4
5
6
7
8
9
10
3
2
-8-
(1) Refresh
This button can get all information of the device and update this software state.
(2) COM Port Selection & Connection Status
Please ensure you have secured the connection between your computer COM port and the device.
Select correct COM port and click the connection/disconnect button to connect software.
(3) Factory Reset
The process of default reset will take about 10~15 seconds.
(4) Video Switch –Full Screen (One View Mode)
Select input source in one view mode (full screen).
(5) Video Switch –Quad View Mode
We provides 3 default quad view mode for user to select different layout modes.
(6) Video Switch –Dual View Mode
It has 2 dual view layout modes for user to select.
Indice
Altri manuali Gomax Interruttore
