Goodmans GDB8 Manuale utente
Before operating this unit,
Please read this user manual carefully
GDB8
OPERATION INSTRUCTIONS
HELPLINE PHONE NUMBER 08708730080
www.goodmans.co.uk
IMPORTANT SAFEGUARDS
This symbol means that this power adaptor is
double insulated.
An earth connection is not required.
HELPLINE PHONE NUMBER 08708730080
WARNING
Never attempt to disassemble or repair an AC Adaptor, and never alter the Power
Supply Cables or plugs as exposure to electric shock hazards could result.
Always contact an authorised service provider, if repair or replacement is required.
WARNING
Always use the AC Adaptor that has been provided with your digital receiver. Bodily injury
or property damage could occur as a result of the use of an unauthourised and incompatible
AC Adaptor.
socket
Never attempt to connect or disconnect the power plug of either the AC adaptor or the
DC with damp or wet hands. Connecting or disconnecting the power plug with
damp or wet hands could result in an electric shock.
WARNING
WARNING
Never leave an open container, such as a cup or glass, containing a liquid near the AC
Adaptor. Spilled liquid coming in contact with the AC Adaptor could cause a fire or electric
shock.
Always unplug the power plug from an outlet by grasping the power plug itself. Never pull
on the Power Supply Cable to disconnect the Power Supply Cable from an outlet. Pulling
on the Power Supply Cable could cause a fire or electric shock as a result of damage to
the Power Supply Cable.
Never use a worn or damaged AC Adaptor Power Supply Cable or plug, or a worn or
damaged extension cord or plug. The use of a worn or damaged Power Supply Cable or
plug could result in electric shock or fire.
2
This equipment shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the equipment. To reduce the risk of fire or electric
shock, do not expose this equipment to rain or moisture.
IMPORTANT SAFEGUARDS (continued)
CAUTION
Never place an AC Adaptor on a wooden surface (or any other surface that could be
marred by exposure to heat) while it is in use, since its surface temperature increases
during normal use. Always rest it on a suitable heat-insulating material.
Never cover the AC Adaptor with any object while it is in use, and never place it adjacent
to a heat source. An excessive temperature increase could detrimentally affect its
performance.
Never place a Power Supply Cable near a heat source, as damage to the cord or to its
insulation could result.
CAUTION
Never bend or twist a Power Supply Cable, and never pull on a Power Supply Cable in an
attempt to remove a plug from an outlet. Always grasp the plug directly when unplugging
a Power Supply Cable to avoid causing any damage to the cord. Never plug the AC
Adaptor into an overloaded multiple outlet, power strip or surge protector to prevent
blowing a fuse or tripping a circuit breaker.
Never place heavy objects on a Power Supply Cable, as that could result in damage to
the cord.
Always confirm that the AC Adaptor plug (and the extension cord and plug, if any)
have been fully inserted into the socket, to assure a safe and secure electrical
connection.
CAUTION
The following marking is printed on the bottom housing.
Location and Handing
Air vents are provided in the cabinet to prevent excessive temperatures inside the unit. Do not
place this unit in closed spaces, cover it, or otherwise block the vents.
3
IMPORTANT SAFEGUARDS (continued)
Do not place this unit in direct sunlight, or near heat sources.
Keep this unit away from strong magnetic objects.
Do not insert or drop anything into this unit through the air vents as this could cause
serious damage, possibly resulting in fire.
Do not place any object containing water or other liquids on this unit. In the event that
liquid should enter the cabinet, unplug this unit immediately and contact the retailer
immediately.
Do not remove the cabinet. Touching parts inside the cabinet could result in electric
shock and / or damage to the unit.
When the unit is not being used, turn the unit off.
Do not turn up the volume while listening to a portion with very low level inputs or no
audio signals. If you do, the speakers may be damaged when a peak level portion is
played.
Do not attempt to service the unit yourself.
When left unused for a long period of time, the unit should be unplugged from the
household AC outlet.
Please refer any service to a qualified service engineer.
Nonuse Periods
On adjusting volume
Service
Manufactured under license from DVB. “DVB” are trademarks of DVB
4
5
Contents
In the box
AV Switching
Over Air Download
Your Digital Receiver
Remote Control Handset
Remote Control Keys
1. Preparation
2. Everyday Operation
3. Advanced Operation
Appendix B Specification
Appendix C Connection a VCR
Appendix D Troubleshooting Guide
6
6
6
7
8
9
10
Connections 10
Switching on 11
Tuning in 11
14
Changing Channels 14
Information Banner 14
Channel List 16
Electronic Programme Guide 17
Audio Control 20
Digital Teletext 22
Widescreen 23
Subtitle 23
24
Configuring Your Receiver 24
Editing The Channel List 26
Channel and Menu Protection 29
Favourite Channels 31
Programme Reminders and Timers 33
Re-installation 35
Appendix A Safety
6
In the box
Inside your GDB8 receiver package you should have :
This user guide
Quick start guide
GDB8 digital terrestrial television receiver
12V DC power adaptor
Remote control remote control
Set of batteries for the handset
Aerial Loopthrough cable
SCART cable
AV Switching
If after connecting the GDB8 to your TV as shown and you do not see a picture,
press AV button on your TV remote until you see the “First Time Installation”
screen.
Over Air Download(OAD)
To ensure that your digital receiver always has the most up-to-date
information, please ensure that after use it is turned to standby. The GDB8 will
automatically power up at 3AM each day and search for any new updates
which may be broadcast and will download any relevant updates found
automatically. This operation will normally take approximately 30 seconds.
If you have an important recording to make at 3AM which must not be
interrupted, then you can disable the auto OAD search by performing the
following:
1.Press MENU button and using the UP/DOWN buttons highlight “Settings”
and press the SELECT button,
2.Use the UP and DOWN button to highlight “Configuration” and press the
SELECT button,
3.Use the UP and DOWN button to highlight “Receiver Upgrade” and press the
SELECT button,
4.Using the LEFT/RIGHT button change "AUTO UPGRADE" option from On to
Off,
5.Press SELECT and MENU and MENU to return to Normal operation.
Do not forget to re-enable the automatic OAD function after you have made
your recording by repeating the above instructions but this time selecting On
otherwise your GDB8 will not be updated if there are any OAD broadcasts.
7
Your Digital Receiver
Front
Remote Sensor
Green LED
IR Signal Indicator
Bi-color LED
(Green for On,
Red for standby)
Reset Button
Aerial In
RF Loop-through out
VCR SCART SOCKET TV SCART SOCKET Audio output
(Left/Right)
12V DC ADAPTOR
SOCKET
Service Port
(Production
line use only)
Rear
8
Remote Control Handset
-NOTE- The numbers in the brackets relate to the numbers shown in the table on the next page.
9
Remote Control Keys
KEY FUNCTION
1. Standby
2. Mute
3. TV/VCR
4. Menu
5. Up, Down, Left, Right
6. Select
7. Numerical keys
8. Guide
9. Volume UP/DOWN
10.Prog UP/DOWN
11.Pause
12.FAV
13.Red/Page Up
14.Green/Page down
15.Yellow
16.Blue
17.Wide
18.i
19.Text
20.Exit
21.Subtitle
Turn the receiver on and off
Mute/unmute the audio output
Display the main menu or exit menus or switch
between available EPG guides
Move between menu items
Make selection in a menu
Change channels / enter PIN code / enter numbers
Display and exit the electronic programme guide
Adjust the audio volume
Change programmes
Freeze the TV programme and show it as a picture, the
sound output continues. Please note: This does not
stop the broadcast and will not show the programme
for the duration that the picture is paused.
Cycle through the available favourites lists.
Select Red Option in digital teletext/menu option;
S
Select the green option in digital teletext/menu option
Select the yellow option in digital teletext/menu option
Select the blue option in digital teletext/menu option
Select Screen Format
Display the i-bar
Enter and exit digital teletext
Turn the subtitle on and off
Switch the output from the TV SCART on the rear of the
unit between Digital and the input from the VCR SCART
croll up a page in menu or channel list
;
Scroll down a page in menu or channel list
10
Preparation
Connections
Place your GDB8 on a firm, level surface with at least a 10cm gap around all
sides of the case and in a position convenient for connection to your television,
a mains power outlet and a TV aerial wall outlet (or the “ flying lead” from your
TV aerial, as appropriate).
Please refer to the safety section in Appendix A.
Turn off your television at the mains and disconnect the lead going to the aerial
wall outlet (or the flying aerial lead) and connect this to the ANT IN socket on
the rear of the receiver.
socket on the receiver to the TV set's aerial socket
Connect the TV SCART socket on the rear of the receiver to a suitable SCART
socket on your television. There may be more than one SCART socket on your
television and, if unsure which to use, you should refer to the manual for
guidance.
Connect the aerial cable (supplied) from the LT OUT
.
1
Indice
Altri manuali Goodmans Ricevitore TV
Goodmans
Goodmans GDR11 Manuale utente
Goodmans
Goodmans GDR10 Manuale utente
Goodmans
Goodmans GFSAT100SD Manuale utente
Goodmans
Goodmans GDR10 Manuale utente
Goodmans
Goodmans GV102ZRH Series Manuale utente
Goodmans
Goodmans GDB7CA Manuale utente
Goodmans
Goodmans GDR11 Manuale utente
Goodmans
Goodmans GDB5 Manuale di riferimento
