Graphic Whizard PT CR607 Manuale utente
1
2020-10-20
Table of Contents
Introduction ..................................................................................................................................................2
Safety Precautions ........................................................................................................................................3
Specifications ................................................................................................................................................4
Overview.......................................................................................................................................................5
Operation......................................................................................................................................................7
Set-Up .......................................................................................................................................................7
Unpacking .................................................................................................................................................7
Initial Operation........................................................................................................................................8
Corner Rounding.......................................................................................................................................8
Selecting a Blade...................................................................................................................................8
Loading Stock........................................................................................................................................9
Cutting Stock.........................................................................................................................................9
Foot Pedal .............................................................................................................................................9
Cut Stick ..............................................................................................................................................10
Installing Cutting Blades..............................................................................................................................11
Top Cover............................................................................................................................................11
Cutter Assembly..................................................................................................................................11
Removing Blades.................................................................................................................................12
Troubleshooting..........................................................................................................................................13
Red Light Indicator..................................................................................................................................13
Unable to Cut Through............................................................................................................................14
Round Corner Adjustment......................................................................................................................15
Maintenance...............................................................................................................................................18
Cleaning...................................................................................................................................................18
Lubrication ..............................................................................................................................................19
Wiring......................................................................................................................................................20
2
Introduction
The CR607 is equipped with an index turret multi-
tool cutting system which provides a series of
rounding radius from 2 to 10mm. The rounding
radius can be chosen by rotating to a different
cutting blade. It is used to round the corners of
paper material up to 2.36" thick like cards, copy
paper, etc. (DO NOT attempt to cut wood, plastic,
or metals).
The machine contains 7 turret mounted cutting
blades for rounding radius of 3mm, 4mm, 5mm,
6mm, 7mm, 8mm, and 9mm. It also contains one
empty carrier slot for optional rounding sizes
2mm or 10mm and a straight cut, either of which
can be installed as needed.
A crank mechanism is used to operate the
movement of corner rounding blades. During one
cycle, the rounding blades move downwards, cut,
and return to the original position.
An inter-lock system is installed to ensure the
safety of the operator. Three inter-lock switches
are placed in different areas and prevent the
machine from operating if problems occur.
To guarantee safety a minimum stack size of
1.75”x3.15” (45x80mm) is recommended. Any
smaller size may cause a personal safety hazard.
Use the foot pedal when working with a stack of
paper larger than 5.8”x8.25” (148x210mm). A
magnetic guide is provided to help align the stack
to ensure a uniform rounded edge.
3
Safety Precautions
DO NOT disassemble the machine with the power cord plugged in.
DO NOT operate with more than one operator.
Always exercise caution when performing maintenance.
DO NOT modify the machine.
DO NOT disassemble the machine when the power is on.
DO NOT operate the machine when the cover is open.
When using a foot pedal, keep hands away from the working area.
DO NOT operate with wet hands.
DO NOT touch any moving parts when in operation.
DO NOT use alcohol or organic solvents to clean the machines.
SWITCH OFF the machine and REMOVE THE POWER PLUG before cleaning.
Clean the machine periodically to maintain best performance.
Install and position the machine on a FLAT and STABLE surface.
Avoid positioning the machine in a humid or dusty environment.
Avoid direct sunshine.
Avoid nearby heat sources.
Avoid toxic and corrosive environments.
DO NOT touch wires, boards, etc. when power cord is plugged in.
4
Specifications
While every effort was made at time of publication to ensure accuracy, Graphic Whizard
Inc./Graphic Whizard USA Inc. will not be liable for omissions or errors. Specifications and
information are subject to change without notice. Actual results are dependent upon application.
Paper, print engine used, and environmental conditions will affect results.
Model Number
PT CR607
Power Supply
110-130V, 50/60Hz, 15A
Nominal Power
120W
Machine Dimensions
(WxLxH)
13.9”x 20.3”x 28.3”
35.4x 51.8x71.9 cm
Weight
47 kg / 103 lbs
Operating Temperature
10-35°C / 50-95°F
Operating Humidity
30-70%
Feeding Method
Manual
Input Paper Size
Min: 45mm-80mm / 1.76”-3.15”
Max: 148mm-210mm / 5.8”-8.25”
Thickness: 2.36"
Tabletop/Floor:
Tabletop *Optional stand available
5
Overview
No
Name
Description
No
Name
Description
1
Cutter Index
Rotate to change blades
8
Waste Tray
Collect paper waste
2
Lock Screw
Lock down cover
9
Error Indicator
Red light- safety switch disabled
3
Top Cover
For protection
10
Power Indicator
Green light- power on
4
Lever
Unlocks cutter turret
11
Left Start Button
Press both buttons together to
cycle the cutter once
5
Cut Stick Lock
Unlock cut stick tool
12
Right Start Button
6
Inching Button
Inching cutter up/down
13
Magnetic Side
Guide
Secures stack in place/safety
feature
7
Switch Key
Power on/off
6
No
Name
Description
1
Cutter Blade Turret
Rotating turret with 7 blades
2
Top Cover Safety Switch
For maintenance
3
Lever Switch
Press down to rotate blade turret
4
Card Press
Holds stack in place
5
Fixed Side Guides
Guides stack in place
6
Cut Stick
Consumable item that the cutting blade strikes
when completing a cycle
7
Operation
Set-Up
The following items listed below are included with the machine. If any one of them is missing,
please contact your dealer.
Name
Quantity
Allen Key (2.5mm)
1
Allen Key (4mm)
1
Extra Cut Sticks
5
Main Switch Key
2
Operation Manual
1
Magnetic Stopper
1
Power Cord
1
Foot Pedal
1
Blades (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, and 9mm)
2 each -
14 total
Radius Guides
2
Unpacking
•Unscrew and remove wooden crate.
•At least two individuals capable of lifting 50 lbs each are required to lift the unit of the
pallet.
•Place he PT CR607 on a flat surface such as the optional stand or a table.
•Inspect the machine for the above listed parts and accessories.
8
Initial Operation
•The PT CR607 is shipped with the cutting tool in the down position to avoid possible
damage in transit.
•Attach power cord to socket at rear of the unit. Plug in to a receptacle (110v). There is
also a 3.15A fuse located in the socket.
•Insert the key and turn clockwise to power on.
•To operate the machine, the user must first return the cutting tool to its home position.
•Press the two-handed operation green Start buttons. The cutting tool will cycle to the
up/home position.
•Use caution. Do not place hands/fingers near cutting area as blades are sharp.
•The machine is now ready for use.
Corner Rounding
Selecting a Blade
With the power off press the lever down at the side of
the cover. Choose the radius by rotating the shaft at the
top of the machine. The radius size is indicated on the
shaft and will face the operator once locked in place.
When you hear a click
sound that means the
cutter is locked and ready
to cut.
The face of blade is also
marked with the radius
size for operator
convenience.
Cutter not
in place
Cutter in
place
9
Loading Stock
Insert a stack of cards in between the fixed side guides.
Place magnetic guide at the open end of stack for safety.
This will also keep stack tight to achieve straight cuts.
Cutting Stock
After loading stock press both green Start
buttons to activate the cutter. The machine will
cycle once.
Foot Pedal
Use the foot pedal to activate the cutter when
rounding larger stock that requires the operator to
hold onto the paper.
CAUTION: NEVER PLACE HANDS/FINGERS
NEAR BLADES WHEN IN OPERATION!!!
Indice
Altri manuali Graphic Whizard Attrezzature industriali
