Indicates a potentially hazardous situation if not avoided, could result in death or serious
injuries.
Following these guidelines to avoid to the risk of fire, burns, injury, electro shocks, rupture,
overheating, abnormal odors or smoke.
Always use the recommended AC adapter (EA10682U-120 from EDAC Power) for the F-Mark
feeder to prevent any damage or failure.
The rated voltage is 100-240V AC 50-60Hz.
Do not touch the F-Mark device during a lightning storm.
Do not use the machine / AC adapter in place of high humidity.
Do not overload the power cord.
Do not place heavy objects on, or damage the power cord or plug.
Do not forcibly bend or pull the power cord.
Make sure that the plug is fully inserted in the power outlet. Do not use outlet that is loose.
Do not allow the machine / AC adapter / power plug to get wet for example, by handling them
with wet hands or spilling beverages onto them.
Do not disassemble or modify the F-Mark / AC adapter.
Disconnect the AC adapter and stop using the machine if you notice abnormal odor, heat,
discoloration, deformation or anything unusual while using it.
Indicates a potentially hazardous situation which, if not avoided could result in minor or
moderate injury.
Follow these guidelines to avid the risk of injury, electro shocks, or damages to the F-Mark2.
When placing the F-Mark2 device, allow enough table space, take in consideration the vibrations
generated during operations.
Ignoring to do this might cause the product or part of it to fall out of position, resulting in possible
body injury or malfunction of the product.
Do not use or store the product is exposed to direct sunlight, water or oil splashes, salty air or
saltwater, dust or humidity, flammable gas.
Do not touch the paper sheets during operation, the paper edge can cut seriously your skin.
Do not approach with your face to the moving arm and moving paper sheet.
Do not attempt to lubricate the mechanisms.
Do not apply force or object weights on the moving arm.
Lay the power adapter in a position so the green light is visible.
The will alert if the adapter should accidentally go off due to external effects. If for any reason
the green light goes off, disconnect the AC power cord from the wall.
Be sure to grasp the plug, not the cable, when disconnecting the power supply from an electric
