Gree XE70-13/E Manuale utente

Owner's Manual

Original Instructions

Wired Controller XE70-13/E

To Users

Thank you for selecting Gree’s product. Please read this instruction manual

carefully before installing and using the product, so as to master and correctly use the

product. In order to guide you to correctly install and use our product and achieve

expected operating effect, we hereby instruct as below:

(1) This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsibility for their safety.

Children should be supervised to ensure that they do not play with the

appliance.

(2) This instruction manual is a universal manual, some functions are only

applicable to particular product. All the illustrations and information in the

instruction manual are only for reference, and control interface should be

subject to actual operation.

(3) In order to make the product better, we will continuously conduct

improvement and innovation. We have the right to make necessary revision

to the product from time to time due to the reason of sales or production,

and reserve the right to revise the contents without further notice.

(4) For personal injury or property loss and damage caused by improper

operation such as improper installation and debugging, unnecessary

maintenance, violation of related national laws and rules and industrial

standard, and violation of this instruction manual, etc., we will bear no

liability.

(5) The final right to interpret for this instruction manual belongs to Gree

Electric Appliances Inc. of Zhuhai.

Contents

1 Safety Notices (Please be sure to abide )..........................1

2 Installation............................................................................2

2.1 Dimension and Component of Wired Controller.................. 2

2.2 Installing Position and Requirements of Wired Controller. 4

2.3 Installation of Wired Controller.............................................. 5

2.4 Disassembly of Wired Controller........................................... 7

3 Display..................................................................................7

3.1 Appearance of Wired Controller............................................. 7

3.2 Home Page Display and Buttons........................................... 8

3.3 Other Icons and Buttons....................................................... 10

4 Functions Description.......................................................11

4.1 Functions Framework ........................................................... 11

4.2 Functions Introduction.......................................................... 12

5 Installation and Debugging...............................................17

6 Operation Instructions ......................................................18

6.1 On/Off...................................................................................... 18

6.2 Mode Setting........................................................................... 20

6.3 Temperature Setting.............................................................. 20

6.4 Fan Setting.............................................................................. 21

6.5 Zone Control........................................................................... 22

6.6 Zone Setting ........................................................................... 24

6.7 Function Setting..................................................................... 29

6.8 View ......................................................................................... 31

6.9 System..................................................................................... 32

6.10 View Malfunction.................................................................. 33

Wired Controller XE70-13/E

1

1 Safety Notices (Please be sure to abide )

WARNING: If not abide strictly, it may cause severe damage to the unit or

the people.

NOTE: If not abide strictly, it may cause slight or medium damage to the

unit or the people.

This sign indicates that the operation must be prohibited. Improper operation

may cause severe damage or death to people.

This sign indicates that the items must be observed. Improper operation

may cause damage to people or property.

WARNING!

This product can’t be installed at corrosive, inflammable or explosive environment

or the place with special requirements, such as kitchen. Otherwise, it will affect the

normal operation or shorten the service life of the unit, or even cause fire hazard or

serious injury. As for above special places, please adopt special air conditioner with

anti-corrosive or anti-explosion function.

Wired Controller XE70-13/E

2

2 Installation

2.1 Dimension and Component of Wired Controller

Figure 2-1 Dimension of Wired Controller (Unit：mm)

Wired Controller XE70-13/E

3

Figure 2-2 Components of Wired Controller

Table 2.1.1 Introduction of Components

No.

①

②

③

④

Name

wired

controller

screw M4×25

installing box

of wired

controller

junction box for

installing inside the wall

Quantity

1

2

1

1(prepared by user)

Wired Controller XE70-13/E

4

2.2 Installing Position and Requirements of Wired

Controller

（1）Please do not install the wired controller in the position where is wet or is

likely to be splashed with water;

（2）Please do not install the wired controller near high-temperature objects or

under direct sunlight;

（3）Before installation, please cut off the power supply of strong current wire

inside the wall, it is not allowed to install under electrified status;

（4）In order to avoid malfunction due to electromagnetic interference and

other causes, please pay attention to the following notices:

1) Make sure that the interface of communication wire is correct, otherwise

the communication cannot work;

2) Signal wire of wired controller should be separated from the power cord

and indoor and outdoor connecting wire, the shortest distance should

be over 20cm, otherwise the communication cannot work normally;

3) If the unit is installed in the position where is likely to be impacted by

electromagnetic interface, signal wire of wired controller should be

made of STP (shielded twisted pair).

（5）The wired controller should only be installed indoors, and its working

Indice

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente