2
ART.NO.
PUMP CONSTRUCTION
1. Thepumpisalreadyassembledwiththehose,drumcover&bucket.Theuserjustneedstoattachtheleverhandlewiththeplungerrod.
2. Selecttherighthandlesettingfor
light,moderateorhighviscosityoils.
Attachtheleverhandletoconnecting
leverusingthepivotpinandretainer
clip.
3. Pulltheplungerrodofpistonsub
assemblyup.Attachthetopoflever
handletothepistonrodusingthe
piivotpinandretainerclip.
4. NowthepumpisreadyforPriming.
Startthepumpbymovingthelever
handle.Primingisaprocessofgetting
thepumpstartedbyoperatingthe
pumpafewtimes.
DrumCover
PivotPin&Retainer Clip
PVCHose
PlungerRod
MachineScrew
withHexNut
DeliverySpout
SuctionTube
NonReturnValve
Piston
Nut
OutletAdapter
Flange
ConnectingLever
LeverHandle
withRubberGrip
SteelBucket
CarryHandle
CoverLock
ASSEMBLY & OPERATION
NOTE:-
• If there is any difficulty in Priming, put some oil in the pump outlet and keep operating the lever handle until the discharge begins.
• There is a machine screw and a hex nut in the flange assembly to hold the pump tube assembly firmly in place.
Do not over tighten the screw and nut.
For Lighter Oils with Low viscosity
For Oils with Moderate Viscosity
For Heavier Oils with High Viscosity
VARIABLE SETTING OF LEVER HANDLE
NOTE
Pumpdeliversoilonmoving
PlungerRodupwards
