GST DI-9204E Manuale del proprietario

This document is subject to change without notice. Please contact GST for more information or questions.

Gulf Security Technology Co., Ltd.

No. 80,Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004

www.gst.com.cn www.utcfireandsecurity.com service.gst@fs.utc.com

DS1054854-1 Page 1

Connecting to the loop of GST fire alarm system,

DI-9204E Digital Manual Call Point (the MCP) is

suitable for public places. When there is fire,

pressing the action plate on the MCP can send

the alarm signal to fire alarm control panel. After

receiving the signal, the control panel will show

address information of the MCP and generate

alarm sound.

Features

Electronically addressed by programmer

Non-break-glass. Reset by a special key.

Plug-in structure.

Designed to comply with EN 54-11.

LPCB/CPD approved.

Wiring

Terminals on the MCP are shown as Fig. 1

Z1, Z2: Connecting to the loop of control panel,

polarity-insensitive.

Recommended Cabling

1.0mm2 or above fire cable, subject to local

codes.

Z1 Z2 Z1 Z2

Fig. 1

DI-9204E

Digital Manual Call Point

Application

1. Application of the MCP is shown in Fig. 2

Fire Alarm

Control Panel

MCP

to the next device

Z1 Z2 Z1 Z2

Fig. 2

2. The MCP should be programmed using

P-9910B programmer, shows in Fig.3. Please

refer to P-9910B Hand Held Programmer

Installation and Operation Manual.





Z2Z1 Z2Z1

Fig. 3

3. Usage of the key for reset

Vertically insert the key into the key-hole, push

in and turn clockwise. Turn the key back and

pull it out when the glass is rebounded, as

shown in Fig.4.

This document is subject to change without notice. Please contact GST for more information or questions.

Gulf Security Technology Co., Ltd.

No. 80,Changjiang East Road, QETDZ, Qinhuangdao, Hebei, P. R. China 066004

www.gst.com.cn www.utcfireandsecurity.com service.gst@fs.utc.com

DS1054854-1 Page 2

Fig.4

4. Usage of the key for unlocking

Insert the forked key and push in hardly, the

MCP body will be separated from the base or

the back box, as shown in Fig.5.

Fig.5

5. Usage of the test tool

The test tool is used to keep the continuity of

the loop during commissioning or maintenance

when MCP is not installed, so that cable test

can be carried out easily and make the circuit

completed.

6. Compatible Equipment

This MCP can be used together with control

panels such as GST100, GST200-2, GST5000

and GST-IFP8.

Specification

Operating Voltage

Loop 24V (16V～28V)

Standby Current

≤0.6mA

Alarm Current

≤1.8mA

Type of Initiating

Part

Reusable

Initiating Mode

Pressing the action plate manually

Resuming Mode

Manually resumed by a special key

Programming

Mode

Electronically addressed

Code Range

One address within 1～242

Wiring

Two-wire, polarity-insensitive

Class

TypeA, indoor use

Ingress Protection

Rating

IP43

Ambient

Temperature

-10℃～+55℃

Relative Humidity

≤95%, non condensing

Material of

Enclosure

ABS

Dimension

(L×W×H)

87.1mm×87.1mm×58mm (with

back box)

87.1mm×87.1mm×23mm (without

back box)

Mounting Hole

Distance

60mm

Weight

About 160g (with back box)

About 107g (without back box)

Accessories and Tools

Model

Name

Remark

P-9910B

Hand Held Programmer

Order separately

Back box 1 piece

within same

package

Test tool 1 piece

within same

package

Reset key 1 piece

within same

package

Please contact with GSTsales for compatible devices.

Altri manuali GST Sistema di sicurezza

GST

GST DC-M9414 Series Istruzioni per il montaggio

GST

GST I-9405 Manuale utente

GST

GST DC-9204 Manuale utente

GST

GST DI-9204E Manuale utente

GST

GST C-9403 Manuale utente

GST

GST DI-9204E Manuale utente

GST

GST I-9407 Manuale utente

GST

GST GST200N Manuale utente

GST

GST DC-M9204F Manuale utente

GST

GST GST116 Manuale utente

GST

GST 8903 Manuale utente

GST

GST I-9403 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente