Gtech MULTI ATF Series Manuale utente
OPERATING MANUAL
Model number:AR Series
Model number:ATF Series
System
5011_System_UF_manual_aw.indd 15011_System_UF_manual_aw.indd 1 18/05/2021 16:4518/05/2021 16:45
2
IMPORTANT SAFEGUARDS:
IMPORTANT: READ ALL INSTRUCTIONS BEFORE USE.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
Do not use in rain or leave outdoors whilst raining.
WARNING: Basic safety precautions should always be observed when
using an electrical appliance, including the following to reduce the risk of fire,
electrical shock, or injury:
Personal Safety:
• Store indoors in a dry place out of the
reach of children.
• Always use responsibly. This appliance
can be used by children aged from 8 years
and above and persons with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe
way and understand the hazards involved.
• Don’t let children play with the appliance;
supervise children using or maintaining
the appliance.
• Use only manufacturer’s recommended
attachments as described in this
manual; misuse or use of any accessory
or attachment other than those
recommended, may present a risk of
personal injury.
• Take extra care when cleaning stairs.
• Keep the appliance and accessories away
from hot surfaces.
• Do not block the appliances openings
or hinder air flow; keep openings free of
any objects including dust, lint, clothing,
fingers (and all parts of the body).
• Particularly keep hair away from openings
and moving parts.
Electrical safety:
• Only use batteries and chargers supplied
by Gtech.
• Never modify the charger in any way.
• The charger has been designed for a
specific voltage. Always check that the
mains voltage is the same as that stated on
the rating plate.
A charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack; never
use the charger with another appliance
or attempt to charge this product with
another charger.
• Before use, check the charger cord for
signs of damage or ageing. A damaged or
entangled charger cord increases the risk
of fire and electric shock.
• Do not abuse the charger cord.
• Never carry the charger by the cord.
• Do not pull the cord to disconnect from
a socket; grasp the plug and pull to
disconnect.
• Don’t wrap the cord around the charger
when storing.
• Keep the charger cord away from hot
surfaces and sharp edges.
• The supply cord cannot be replaced. If the
cord is damaged the charger should be
discarded and replaced.
• Do not handle the charger or the
appliance with wet hands.
• Do not store or charge the appliance
outdoors.
• The charger must be removed from the
socket before removing the battery,
cleaning or maintaining the appliance.
• Ensure the Multi is off before connecting
or disconnecting the motorised brush bar.
Battery safety:
• This appliance includes Li-Ion batteries; do
not incinerate batteries or expose to
high temperatures, as they may explode.
• Liquid ejected from the battery may cause
irritation or burns.
5011_System_UF_manual_aw.indd 25011_System_UF_manual_aw.indd 2 18/05/2021 16:4518/05/2021 16:45
3
• In an emergency situation contact
professional help immediately!
• Leaks from the battery cells can occur
under extreme conditions. Do not touch
any liquid that leaks from the battery. If the
liquid gets on the skin wash immediately
with soap and water. If the liquid gets into
the eyes, flush them immediately with
clean water for a minimum of 10 minutes
and seek medical attention. Wear gloves
to handle the battery and dispose of
immediately in accordance with local
regulations.
• Shorting the battery terminals may cause
burns or fire.
• When the battery pack is not in use, keep
it away from paper clips, coins, keys, nails,
screws or other small metal objects that
could make a connection from one terminal
to another.
• When you dispose of the appliance remove
the battery and dispose of the battery safely
in accordance with local regulations.
Service:
• Before using the appliance and aer any
impact, check for signs of wear or damage
and repair as necessary.
• Do not use the appliance if any part
is damaged or defective.
• Repairs should be carried out by a
service agent or a suitably qualified
person in accordance with relevant safety
regulations. Repairs by unqualified persons
could be dangerous.
• Never modify the appliance in any way as
this may increase the risk of personal injury.
• Only use replacement parts or accessories
provided or recommended by Gtech.
Intended use:
• This appliance has been designed for
domestic dry vacuum cleaning only.
• Do not pick up liquids or use on wet
surfaces.
• Do not pick up anything that is flammable,
burning or smoking.
• Use only as described in this manual.
• Don’t use on concrete, tarmacadam
or other rough surfaces.
• The brush bar may damage certain floor
surfaces. Before vacuuming flooring,
rugs or carpets, check the flooring
manufacturer’s recommended
cleaning instructions.
• The product may damage delicate fabrics or
upholstery. Care should be taken on loose-
weave carpets and coverings or where there
are loose threads. It is advised to test on an
inconspicuous area first before use.
• The product has been designed to clean
a wide variety of floor surfaces without the
need to change settings. However some
surfaces such as delicate loose-pile rugs or
carpets, tasselled rug edges or damaged
carpets with exposed threads are not
suitable for cleaning with a rotary brush.
• The product has a constantly rotating brush
bar. Never leave the cleaning head in one
spot for an extended period of time as this
may damage the floor surface.
• Particularly for hard flooring, before
vacuuming check the area being cleaned is
free of any hard debris or objects that could
damage the flooring if caught underneath
the product, and that the underside of the
product is free from foreign objects that
could mark the surface.
WARNING:
•Do not use water, solvents, or polishes to
clean the outside of the appliance; wipe
clean with a dry cloth.
•Never immerse the unit in water and do
not clean in a dish washer.
•Never use the appliance without the
filter fitted.
•Ensure the battery is removed before
changing tools.
5011_System_UF_manual_aw.indd 35011_System_UF_manual_aw.indd 3 18/05/2021 16:4518/05/2021 16:45
4
What’s in the box
2
7
Crevice tool (stored inside the handle)
7
9
Lower handle
2Power brush
5
Head full assembly
1Multi main unit
4
Upper handle
3Dusting brush
6
Charger x2
9
Hair removal tool
10
10
3
6
5
1
Make a note of both your product’s serial number codes for future reference. You can
find them on the underside of the Product and the underside of the Multi once the
battery has been removed.
_ - _ _ - _ _ _ ~
_ _ _ _ _ ~
_ _ _ _ ~
_ _ ~ _ _ _ _ _ _ _
X-XX-XXX~
XXXXX~
WWYY~
00~0000000
Extension tube
8
8
4
Nick Grey – Inventor, owner of Gtech
Thank you for choosing Gtech
“Welcome to the Gtech family. I started Gtech to create sensible, easy
to use products that do a great job, and hope you get many years of
trouble-free performance from your new product.”
5011_System_UF_manual_aw.indd 45011_System_UF_manual_aw.indd 4 18/05/2021 16:4518/05/2021 16:45
5
Ensure the lower handle is sitting completely
flush against the pivot yoke. Firmly push the
green locking clip until it clicks fully into place.
The clip can be pulled out to unlock the lower
handle should it need to be removed.
AirRAM: Assembly
Push the pivot poke to the upright position.
This might require some force.
Attach the lower handle to the head assembly
(See next step)
Pull out the green locking clip to allow the
lower handle to fit (the clip remains attached
to the head) Insert the metal pin on the lower
handle into the hole in the pivot yoke.
Push the two parts of the lower handle
together in the orientation shown above. They
will only fit one way. They will click into place
and remain permanently fixed.
1
2
5011_System_UF_manual_aw.indd 55011_System_UF_manual_aw.indd 5 18/05/2021 16:4518/05/2021 16:45
6
To stow or extend the upper handle simply
press the button on the lower handle to
unlock the upper handle.
The upper handle will now slide up or down
depending on required position.
Storage
The upper handle can be set in two positions:
Lowered for storage and raised for use. To
lower the handle, release the upper button.
To raise the handle from the stored position,
release the lower button.
Upper Button
Lower Button
Assembly (continued)
Insert the upper handle into the lower handle.
You will need to press the button on the upper
handle to fit it in. Once it slides down you will
hear it click into place.
Push the two parts of the upper handle
together in the orientation shown above. They
will only fit one way. They will click into place
and remain permanently fixed.
5011_System_UF_manual_aw.indd 65011_System_UF_manual_aw.indd 6 18/05/2021 16:4518/05/2021 16:45
7
Operation
Without pressing the power button, place
your foot on the le side of the head (1) and
pull the handle back (2).
Press the power button with your foot to turn
the product on.
The power button is located on the le hand
side of the head assembly.
1
2
5011_System_UF_manual_aw.indd 75011_System_UF_manual_aw.indd 7 18/05/2021 16:4518/05/2021 16:45
8
The battery can be charged whilst it’s in the
product, or when it’s off the product. The
battery can be charged from flat in 4 hours.
The state of charge indicator will show 4 solid
green lights when it is charged.
It is OK to charge for 1 hour for a burst of
cleaning. Replace the battery by sliding it
down into the head assembly. It will click into
place.
When the state of charge indicator starts to
flash one green LED, recharge the battery.
To remove the battery, squeeze the latch
underneath and pull upwards.
Battery charging
4
hours
5011_System_UF_manual_aw.indd 85011_System_UF_manual_aw.indd 8 18/05/2021 16:4518/05/2021 16:45
9
Holding onto the head with one hand, pull the
bin handle and li the bin out of the product.
Li and release the latch marked with the green
arrow, to pull open the lid.
Emptying the bin
Hold the product’s bin over a rubbish bin
and push the green lever towards the lid to
empty the dirt.
Pull the green lever back towards the bottom
of the bin. Close the bin lid and reinsert the bin
into the product.
5011_System_UF_manual_aw.indd 95011_System_UF_manual_aw.indd 9 18/05/2021 16:4518/05/2021 16:45
10
Pull the filter out of the filter housing.
Tap the dirt from the filter and tip any
dirt from the filter housing.
Wash the filter if necessary.
Cleaning the filters - do this once a month or more frequently depending on use.
Remove the filter from the inner shroud,
by twisting and pulling.
Tap the inner shroud over a bin to remove any
excess dirt.
Wash the filter under a tap. Squeeze out any
excess water then let it dry completely
before reinserting into the product.
Recommended water temperature 40°C.
Do not use detergent or soaps. Never put
the bin back without filter inside. You
could damage the motor.
Holding onto the head with one hand, pull the
bin handle and li the bin out of the product.
5011_System_UF_manual_aw.indd 105011_System_UF_manual_aw.indd 10 18/05/2021 16:4518/05/2021 16:45
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Gtech Taglia erba
Gtech
Gtech CM01 Manuale dell'operatore
Gtech
Gtech CLM001 Manuale utente
Gtech
Gtech CLM001 Manuale utente
Gtech
Gtech AirRam K9 Manuale utente
Gtech
Gtech CLM50 Manuale utente
Gtech
Gtech MULTI MK2 ATF Series Manuale utente
Gtech
Gtech SLM50 Manuale utente
Gtech
Gtech CLM2.0 Manuale utente
Gtech
Gtech RCLM001 Manuale utente
Gtech
Gtech CLM Series Manuale utente
Manuali Taglia erba popolari di altre marche
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manuale utente
DEWEZE
DEWEZE ATM-725 Manuale operativo
Weed Eater
Weed Eater 180083 Manuale utente
Husqvarna
Husqvarna Poulan Pro PP185A42 Manuale utente
Better Outdoor Products
Better Outdoor Products Quick Series Manuale utente
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manuale operativo
