Guepard Networks GO1200ac Manuale utente
GO1200ac Manual
www.guepardnetworks.com
Dual Band 11ac/11n 1200 Mbps
AP/CPE OUTDOOR WIRELESS
Model: GO1200ac
ADVANCED TECHNOLOGY
Professional Qualcomm Chipset
GO1200ac was integrated Qualcomm's chipsets. This is an 11ac 1200Mbps High Power Outdoor CPE/AP/
Router/WISP, wireless distance can be 500-1.000 meters (a pair CPEs). This Outdoor CPE with the next
generaon 802.11ac Wi-Fi standard combined 1200Mbps Wi-Fi speed over 2.4GHz (300Mbps) and 5GHz
(900Mbps) and equipped Gigabit WAN port, Gigabit Ethernet data rate can be taking care 40-80 end
users at the same me. Matching access demand to enjoy seamless HD movies, streaming, online
gaming, wireless security and other bandwidth-intensive tasks.
1 | Page
GO1200ac Manual
www.guepardnetworks.com
1st Hardware and Operaon mode Instrucon
1) Hardware interface
P1. GO1200ac physical interface
DC Power: DC power connector
LED Lights: LED Indicator of WAN port and LAN port using.
WAN/POE Port: Gigabit WAN/POE Port this port using connect with ADSL modem or Internet mainly or
over POE adapter (if do not use DC Power connector).
LAN: Gigabit LAN Port for more cable end users.
Reset Buon: it make AP revert to factory default aer press and hold it 15 seconds.
LED indicator (Side)
•Sys: System running
•2G: 2.4GHz WiFi Indicator
•5G: 5GHz WiFi Indicator
2) How to supply data and power to GO1200ac?
The connecon diagram showed as P1, internet cable connect to PoE adapter’s LAN Port, GO1200ac’s
WAN/POE port connect to POE adapter’s POE Port, then end users will access into GO1200ac through
cable (GO1200ac’s LAN port) or wireless (2.4GHz/5GHz).
2 | Page
GO1200ac Manual
www.guepardnetworks.com
P2. GO1200ac use PoE adapter: IEEE 802.3at 48V
Please note: if the Wireless AP support 24V passive PoE then the PoE adapter should be 24V Passive PoE.
If the wireless AP support 48V IEEE 802.3af/at standard PoE then the PoE adapter should be 48V PoE
standard.
All operaon modes
Operaon as diagram as below:
P3. Gateway mode diagram
3 | Page
GO1200ac Manual
www.guepardnetworks.com
P4. AP mode diagram
P5. WISP mode diagram
4 | Page
GO1200ac Manual
www.guepardnetworks.com
P6. Repeater mode diagram
P7. Super WDS mode diagram
There are five operaon modes on this wireless AP/CPE.
5 | Page
GO1200ac Manual
www.guepardnetworks.com
How to connect GO1200ac Wireless AP
Users can connect the PC/Laptop/Smartphone/Tablet… into this wireless AP by Wireless SSID and LAN
cable: The default SSID is Wireless 2.4G for 2.4GHz and Wireless 5.8G for 5.8G, SSID’s
password is 66666666 (number six eight mes).
2st GUI Login (Graphic User Interface)
1）Choose the proper power supply mode and operaon mode
2）Assign an IP address for local PC/Workstaon
Following steps will show how to assign an IP address (stac IP) for PC aer connect wireless AP and PC
by wired cable or wireless : configure local IP address as 192.168.188.X (X can be selected from 2-252)
the same network segment as ceiling AP, subnet mask 255.255.255.0, As P3 and P4 shows.
P8. Check Control Panel>Network and Internet>Network Connecons>Wi-Fi>Properes (Win 10)
P9. Assign IP address for PC/Workstaon (Such as: 192.168.188.100)
6 | Page
GO1200ac Manual
www.guepardnetworks.com
3) Open browser MicrosoEdge, Chrome, Firefox… and input device’s
default IP 192.168.188.253 (this is IP default of Wireless AP) on the address bar, then press Enter, a
login page will pop up, input admin in Login Device cell, then press Enter or Login buon on Admin
interface.
P10. Login interface.
3rd Sengs GUI (Graphic User Interface)
1) Home (Device status):Aer success login, then P6 Device Status will be showed:
P11. Infographic of Device Status.
7 | Page
GO1200ac Manual
www.guepardnetworks.com
Home (Detail of indices):
•Operaon Mode: Current mode of device (As P6 picture above is AP mode)
•Upme: device period me running unl current (As P6 picture above is 48 minutes and 03 seconds).
•Flow (2G WiFi) bps: Flow chart of 2.4GHz describe flow of AP upstream and downstream in real
me.
•Device Informaon: rao of CPU, Memory usage.
•Device Descripon: descripon space for this device (Ex: administrator can input device name,
locaon… which hint for maintenance).
•LAN Informaon: showing LAN parameter such as: IP Mode, LAN IP, Subnet, AC/Gateway Address,
MAC Address.
•2G WiFi/5G WiFi: tab showing 2G WiFi/5G WiFi parameter such as: Status (online users), SSID,
Channel, Encrypt, MAC Address.
2) Wizard: Shortcut for switching wireless AP’s operaon modes.
Click Wizard in Status page will have pop-up following page to configure the operaon mode:
There are five operaon mode of ceiling wireless AP and there are explanaon for each operaon mode
for beer use, see P7 below:
P12. Switching funcon between wireless AP/CPE’s operaon modes.
8 | Page
GO1200ac Manual
www.guepardnetworks.com
P13. Device is running in AP mode.
There are five operaon mode of ceiling wireless AP and there are explanaon for each operaon mode
for beer use.
•Gateway Mode: In this mode, the device is supposed to connect to internet via ADSL/Cable
Modem. The NAT is enable and PCs in LAN ports share the same IP to ISP through WAN port. The
connecon type can be setup in WAN page by using PPPOE, DHCP client or stac IP.
•Repeater Mode: In this mode, the user can access wireless AP, device can be connected to other
wireless network using the wireless. All interfaces are bridged together. Without NAT, firewall and
all network related funcons.
•WISP Mode: In this mode, all Ethernet ports are bridged together and wireless clients will connect
ISP access point. The NAT is enabled and PCs in Ethernet port share the same IP to ISP through
wireless LAN. You must set wireless to client mode first and connect to the ISP AP in Site-Survey
page. The connecon type can be setup in WAN page by using PPPOE, DHCP client and stac IP.
•AP Mode: In this mode, the AP wireless interface and cable interface bridging together. Without
NAT, firewall and all network related funcons.
•Super WDS Mode: In this mode, the wireless interface can be connected with other wireless AP
through WDS (The Wireless Distribuon System), and the wireless interface and cable interface.
Without NAT, firewall and all network related funcons.
9 | Page
GO1200ac Manual
www.guepardnetworks.com
3) WiFi:
In WiFi, user can check and configure all indices: 2G WiFi, 5G WiFi, MAC ACL, WiFi Timer Off, Advanced.
2G WiFi: This secon allow configure 04 SSIDs in 2.4GHz frequency, such as: Basic, VAP1, VAP2,
VAP3.
P14. WiFi configuraon for 2.4GHz frequency.
•WiFi Status: Switching buon is green meaning this SSID is On status. WiFi Analyzer buon is ulity
for checking all APs and their broadcast channel in current region, which will help us choosing good
channel to broadcasng.
•SSID: naming SSID for device in 2.4GHz frequency.
•Hide your SSID?: hiding device’s SSID aer seng up and connecng.
•BandWidth: choosing broadcasng bandwidth which will give full device bandwidth or half
bandwidth with longer distance.
•Channel: choosing device’s broadcasng channel which will have not interference with other AP’s
channel.
•Encrypt: choosing Encrypon (with Password) or Open (without Password)
•WiFi Password: inpung password (if choosing Encrypon)
10 | Page
Indice
Altri manuali Guepard Networks Punto di accesso wireless
