9
© Guldmann GB/US-1718/03/11 • # 553211
© Guldmann GB/US-1718/03/11 • # 553211
© Guldmann GB/US-1718/03/11 • # 553211
© Guldmann GB/US-1718/03/11 • # 553211
2.00 Description of functions
2.01 Operation
The free-standing rail system, adjustable, is a portable system that, once
installed, does not require any further operation.
2.02 Length and height adjustment
Length adjustment
(when the system is in the lowest position):
• Set up the system (see 1.06).
• Loosen the 2 yellow thumb screws on the
top of the brackets manually.
• Pull the rail out of the top brackets until
the required length has been reached
• Tighten the 2 yellow thumb screws on
the top of the brackets manually after the
adjustment is nished.
Height adjustment:
• Set up the system (see 1.06).
• Insert the accompanying 5mm Allen key
or a power drill with 5mm bit in the height
adjustment socket at the side of the ver-
tical pole.
Adjust each pole to the required height
and afterwards adjust the system until the
top bracket and rail module is level
3.00 Demounting and transportation
3.01 Demounting the system
Lower the system to the lowest position.
Demount the free-standing rail system in the reverse order of the mounting
(see 1.06).
It may be necessary push the top bracket upwards in order to separate it from
the Vertical pole module.
Important:
Before taking down the free-standing rail system, the hoist must be taken out
or secured by means of the end stops.
