GVD E Series Manuale utente
GVD HD NVR Hardware
Quick Installation Guide
1
Hardware Quick Installation Guide
Hardware Installation
M90 Series
Recommended HDD for GVD NVR
M100 Series
M150 Series
M200 Series
M350 Series
M600 Series
Recording HDDs Initialize Procedures
Disable System Protection
Date & Time/Time Zone Setup
Network Setup
Screen Resolution Setup
Enable System Protection
How to Create Raid 5 (for M600 series only)
Change Boot Priority
HDD Installation Guide
Software Configuration
Create Volume for Recording
Add Camera Automatically
Setup Motion Recording
Troubleshooting FAQ
Appendix.
Content
2
3
4
5
11
12
13
14
15
17
18
21
23
26
12
16
26
32
34
2
7
10
8
Recording data is one of the most important part in security industry and hard
disk would be one of the most important component if users want to have their
recording data safely stored.
It is always recommended to use the hard disk model that GVD certifies, user
can find the updated list from the URL below :
http://www.gvdigital.com/document/Support_Lists/GVD_Certified_HDD_List.pdf
2Hardware Quick Installation Guide
Recommended HDD for GVD NVR
*Please refer to the Appendix page for HDD Installation Guide
3
Hardware Quick Installation Guide
Hardware Installation M90 Series
Connect the keyboard to the Keyboard PS2 port (purple)/USB port.
Connect the mouse to one of the USB port.
Connect the display monitor to the VGA port.
Connect the power cord to the AC power socket at the rear panel of the unit.
Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port, and connect the other
end of the cable to a switch connecting to the camera network.
Plug in the speaker to the audio output port if necessary.
Plug in the power cord to the AC power socket of power distribution unit and the
system will turn on automatically.
6
7
Empowering Megapixel
17
46
2
35
* Please DO NOT plug any USB device other than keyboard & mouse to the machine
before entering operating system.
* For M90 series, it can support decoding resolution from D1 up to 3M
* GVD will not be liable for any malfunction of the system if customer installed any non-certified
3rd-party application in the system.
4Hardware Quick Installation Guide
Hardware Installation M100 Series
Connect the keyboard to the Keyboard PS2 port (purple)/USB port.
Connect the mouse to the mouse PS2 port (green)/another USB port.
Connect the display monitor to the VGA port.
Connect the power cord to the AC power socket at the rear panel of the unit.
Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port, and connect the other
end of the cable to a switch connecting to the camera network.
Plug in the speaker to the audio output port if necessary.
Plug in the power cord to the AC power socket of power distribution unit and the
system will turn on automatically.
6
7
4
1
2
3
5
67
* Please DO NOT plug any USB device other than keyboard & mouse to the machine
before entering operating system.
* For M100 series, it can support decoding resolution from D1 up to 3M.
* GVD will not be liable for any malfunction of the system if customer installed any non-certified
3rd-party application in the system.
5
Hardware Quick Installation Guide
Hardware Installation M150 Series
Connect the keyboard to the Keyboard PS2 port (purple)/USB port.
Connect the mouse to the mouse PS2 port (green)/another USB port.
Connect the display monitor to the VGA port.
Connect the power cord to the AC power socket at the rear panel of the unit.
Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port, and connect the other
end of the cable to a switch connecting to the camera network.
Plug in the speaker to the audio output port if necessary.
Plug in the all power cords to the AC power socket of power distribution unit and
system will turn on automatically.
6
7
6
7
5
4
4
1
2
* Please DO NOT plug any USB device other than keyboard & mouse to the machine
before entering operating system.
* For M150 series, it can support decoding resolution from D1 up to 3M.
* GVD will not be liable for any malfunction of the system if customer installed any non-certified
3rd-party application in the system.
6Hardware Quick Installation Guide
Hardware Installation M150 Series
1
1
2
2
3
4
5
678 9 10 11 12 13
14 15 16 17 18
19
20
Reset
HDD Fail
14 Manual Recording
15 Toggle Tour
16 Toggle Full Screen
17 Switch Pattern
18 Back to Live
6Power LED
5Recording LED
On when NVR is recording
Off when NVR is not recording
4Alarm
On when NVR has active alarm
Off when NVR does not have active alarm
3Video Loss
On when there is channel in video loss state
Off when there is no channel in video loss state
On when there is HDD in exception state
Off when all HDDs are in normal state
19 1x1 Display
20 Change Viewer Focus
9Step by Step Backward Playback
10 Step by Step Forward Playback
11 Playback Backward
12 Pause
13 Playback Forward
7Long Duration Playback
(Click once to playback forward/backward 5 mins)
8Short Duration Playback
(Click once to playback forward/backward 30 secs)
7
Hardware Quick Installation Guide
Hardware Installation M200 Series
Connect the keyboard to the Keyboard PS2 port (purple)/USB port.
Connect the mouse to the mouse PS2 port (green)/another USB port.
Connect the display monitor to the VGA port.
Connect the power cord to the AC power socket at the rear panel of the unit.
Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port, and connect the other
end of the cable to a switch connecting to the camera network.
Plug in the speaker to the audio output port if necessary.
Plug in the power cord to the AC power socket of power distribution unit and the
system will turn on automatically.
6
7
12
3
5
6
4
7
* Please DO NOT plug any USB device other than keyboard & mouse to the machine
before entering operating system.
* For M200 series, it can support decoding resolution from D1 up to 3M.
* GVD will not be liable for any malfunction of the system if customer installed any non-certified
3rd-party application in the system.
8Hardware Quick Installation Guide
Connect the keyboard to the Keyboard PS2 port (purple)/USB port.
Connect the mouse to the mouse PS2 port (green)/another USB port.
Connect the display monitor to the VGA port.
Connect the power cord to the AC power socket at the rear panel of the unit.
Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port, and connect the other
end of the cable to a switch connecting to the camera network.
Plug in the speaker to the audio output port if necessary.
Plug in the power cord to the AC power socket of power distribution unit and the
system will turn on automatically.
6
7
* Please DO NOT plug any USB device other than keyboard & mouse to the machine
before entering operating system.
* For M350 series, it can support decoding resolution from D1 up to 10M.
7
4
5
3
12 6
* GVD will not be liable for any malfunction of the system if customer installed any non-certified
3rd-party application in the system.
Hardware Installation M350 Series
9
Hardware Quick Installation Guide
Hardware Installation M350 Series
1
1
2
2 3 4 5 67
8 9 10 11 12 13 14 15
16 17 18 19 20 21
22
23
24
Power 11 Step by Step Backward Playback
12 Step by Step Forward Playback
13 Playback Backward
14 Pause
15 Playback Forward
16 Manual Recording
17 Snapshot
18 Toggle Tour
19 Toggle Full Screen
20 Switch Pattern
21 Back to Live
22
23 1x1 Display
Change Viewer Focus
Reset
3Power LED
4Recording LED
5Alarm
On when NVR is recording
Off when NVR is not recording
On when NVR has active alarm
Off when NVR does not have active alarm
6Video Loss
On when there is channel in video loss state
Off when there is no channel in video loss state
7HDD Fail
8Switch Monitor
9Long Duration Playback
On when there is HDD in exception state
Off when all HDDs are in normal state
24 Rewind Dial
Outer :
Inner :
(Click once to playback forward/backward 5 mins)
10 Short Duration Playback
(Click once to playback forward/backward 30 secs)
Left = Playback backward with speed change
Right = Playback forward with speed change
Left = Playback backward frame by frame
Right = Playback forward frame by frame
Altri manuali per E Series
1
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali GVD Registratore digitale
