GVD M3000 Series Manuale utente
www.gvdigital.com
GVD HD NVR Hardware
Quick Installation Guide
Hardware Quick Installation Guide i
Revision history
Revision Time Description
Feb 2016 The M6000 Series changes the motherboard, which involves the following changes
of the product:
M6000 Series no longer supports FBWF but VHD. The following conguration
can be conducted straight without FBWF concern:
■Manage network as described on page 9.
■Manage screen resolutions as described on page 10.
■Manage date, time, & time zone as described on page 11.
By VHD support, system backup and recovery becomes available for M6000
Series:
■Back up initial system state as described on page 17.
■Back up system state as described on page 18.
■Recover system state as described on page 20.
The M6000 Series has the rear I/O ports changed, which involves the following
update in this document.
■Install hardware: M6236, M6036, M6024, M6016, M6012 on page 7is
updated.
May 2016 A brand new NVR M2002 is launched, which involves the following changes of this
document:
Section Install hardware: M2002 is newly added on page 2.
Section Appendix: Install HDDs: M2002 is newly added on page 34.
June 2017
Power-disconnection buzzer is deleted and replaced by a power status LED for
M6236, M6036, M6024, M6016, M6012. See page 7.
The default of RAID initialization state setting for M4006-AR, M4008-AR &
M6000 Series is changed to Full Initialization (Foreground). See page 27.
Hardware Quick Installation Guide
ii
Revision history
May 2018
New products M4106 & M4108 are added:
- Section Install hardware: M4106 & M4108 is added on page 5.
- Appendix. Create RAID5 on M4106, M4108, & M6108 is added on page 29.
- Appendix: Install HDDs: M4106 & M4108 is added on page 42.
M95, M4008, M4008-AR, and M4006-IR are deleted.
June 2018
New product series M6108 is added:
- Section Install Hardware: M6018 is added on page 6.
- Appendix. Create RAID5 on M4106, M4108, & M6108 is added on page 29.
- Appendix: Install HDDs: M6108 is added on page 47.
Sept 2019
Appendix. Create RAID5 : M4106, M4108, & M6108 is updated with the
initialization of "physical device(s)" from step 4to step 8.
Hardware Quick Installation Guide iii
Contents
Revision history .............................................................. i
Contents ........................................................................iii
Hardware requirements.................................................1
Install hardware .............................................................2
M2002 .......................................................................... 2
M3000 Series ............................................................... 3
M4006 & M4006-AR..................................................... 4
M4106 & M4108 ........................................................... 5
M6018 .......................................................................... 6
M6236, M6036, M6024, M6016, M6012 ...................... 7
Set up Windows.............................................................8
Manage network............................................................9
Manage screen resolutions .........................................10
Manage date, time, & time zone.................................. 11
Enable watchdog timer................................................12
Initialize HDDs.............................................................13
Create storage volumes ..............................................14
Auto-add a camera......................................................15
Back up initial system state .........................................17
Back up system state ..................................................18
Recover system state..................................................20
Troubleshooting...........................................................22
Appendix. Create RAID5 .............................................24
M3004-IR.................................................................... 24
M4006-AR, M6012, M6016, M6024, M6036, & M623625
M4106, M4108, & M6108 ........................................... 29
Appendix: Install HDDs................................................34
M2002 ........................................................................ 34
M3000 Series ............................................................. 37
M4000 Series ............................................................. 39
M4106 & M4108 ......................................................... 42
M6108 ........................................................................ 47
M6236, M6036, M6024, M6016, M6012 .................... 55
Appendix. Connect S6000 Series to M6236, M6036, M6024,
or M6016 .....................................................................57
Hardware Quick Installation Guide
iv
Hardware Quick Installation Guide 1
Hardware requirements
Recording data is one of the most important parts for video surveillance, and hard disk drives
are one of the most important components to safely store the recording data.
It is always recommended that you use the hard disk drives certified by GVD. Find the list of
the GVD-certified hard disk drives at the link below:
http://www.gvdigital.com/gvdweb/html/document/Support_Lists/Certified%20HDD%20List.pdf
GVD does not guarantee the system performance if a HDD model that is not certied by
GVD is used.
GVD always recommends the use of Enterprise Class SATA hard drives for GVD Enterprise
NVR, Failover Server, Backup Server, Extended Storage because it supports TLER (Time
Limited Error Recovery), higher MTBF, higher Duty Cycles and typically include a sensor
for rotation and vibration.
Hardware Quick Installation Guide
2
Install hardware: M2002
1 Connect the keyboard and mouse to the USB ports or the PS/2 ports.
2 Connect the display monitor to either the VGA port or the HDMI port.
3 Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port, and connect the other
end of the cable to a switch connecting to the camera network.
4 Plug in the speaker to the audio output port if necessary.
5 Connect the power cable (with the power adapter) to the DC-in power jack. Then
connect them to a power outlet.
6 The NVR then auto powers on when power source is connected.
7 The LED lights blue when the NVR powers on.
8 If serial data connection is needed, connect cables to these serial COM ports.
9 Hit this power button to power on the system.
➊➋
➋ ➌
➎ ➊
➍
➑
➊ ➒➐
Hardware Quick Installation Guide 3
Install hardware: M3000 Series
1 Connect the keyboard and mouse:
- M3004: Connect them to the USB ports.
- M3004-IR: Connect the mouse to one of the USB ports and connect the keyboard to
one of the USB ports or to the purple PS/2 connector.
2 Connect the display monitor to either the D-sub or DVI or HDMI port.
3 Connect the power cord to the AC power socket at the rear panel of the unit.
4 Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port, and connect the other
end of the cable to a switch that is connected to camera network.
5 Plug in the speaker to the audio output port if necessary.
6 The unit then auto powers on when the power cord is connected to power source.
6
1
3
4
52
4
1
3
5
2
Rear: M3004-IR Rear: M3004 Front
GVD isn’t responsible for any system malfunction if a 3rd-party application that isn’t certied by
GVD is installed in the system.
M3004 (IR) series support decoding the resolution from D1 up to 20M.
DO NOT plug any USB device except keyboard & mouse before the operating system starts.
Hardware Quick Installation Guide
4
Install hardware: M4006 & M4006-AR
1 Connect a keyboard to one of the USB ports.
2 Connect a mouse to one of the USB ports.
3 Connect a display monitor to either the D-sub or DVI or HDMI port.
4 Connect the power cord to the AC power socket.
5 Plug in a CAT-6 UTP cable to the RJ-45 Gigabit LAN port, and connect the other
end of the cable to a switch connecting to the camera network.
6 Plug in the speaker to the audio output port if necessary.
7 Hit the power button to power on the NVR.
1
623
4
57
GVD isn’t responsible for any system malfunction if a 3rd-party application that isn’t certied by
GVD is installed in the system.
M4006 and M4006-AR support decoding the resolution from D1 up to 20M.
DO NOT plug any USB device except keyboard & mouse before the operating system starts.
M4106 & M4108
Questo manuale è adatto per i seguenti modelli
11
Indice
Altri manuali GVD Registratore digitale
