H3C MSR Series Manuale utente

H3C MSR Router Series

Comware 7 OAA Configuration Guide

New H3C Technologies Co., Ltd.

http://www.h3c.com

Software version: MSR-CMW710-R0615

Document version: 6W202-20200321

No part of this manual may be reproduced or transmitted in any form or by any means without prior written

consent of New H3C Technologies Co., Ltd.

Trademarks

Except for the trademarks of New H3C Technologies Co., Ltd., any trademarks that may be mentioned in this

document are the property of their respective owners.

Notice

The information in this document is subject to change without notice. All contents in this document, including

statements, information, and recommendations, are believed to be accurate, but they are presented without

warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions

contained herein.

Preface

This configuration guide describes the Open Application Architecture (OAA) supported protocols

(such as ACFP and ACSEI), their configurations, and the configuration of the H3C open application

platform (OAP) card.

This preface includes the following topics about the documentation:

•

Audience.

•

Conventions.

•

Documentation feedback.

Audience

This documentation is intended for:

•

Network planners.

•

Field technical support and servicing engineers.

•

Network administrators.

Conventions

The following information describes the conventions used in the documentation.

Command conventions

Convention

Description

Boldface Bold text represents commands and keywords that you enter literally as shown.

Italic Italic text represents arguments that you replace with actual values.

[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.

{ x | y | ... }

Braces enclose a set of required syntax choices separated by vertical bars, from which

you select one.

[ x | y | ... ]

Square brackets enclose a set of optional syntax choices separated by vertical bars,

from which you select one or none.

{ x | y | ... } *

Asterisk marked braces enclose a set of required syntax choices separated by vertical

bars, from which you select a minimum of one.

[ x | y | ... ] *

Asterisk marked square brackets enclose optional syntaxchoices separated by vertical

bars, from which you select one choice, multiple choices, or none.

&<1-n> The argument or keyword and argument combination before the ampersand (&) sign

can be entered 1 to n times.

# A line that starts with a pound (#) sign is comments.

GUI conventions

Convention

Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window opens; click OK.

Multi-level menus are separated by angle brackets. For example, File > Create >

Convention

Description

Folder.

Symbols

Convention

Description

WARNING! An alert that calls attention to important information that if not understood or followed

can result in personal injury.

CAUTION:

An alert that calls attention to important information that if not understood or followed

can result in data loss, data corruption, or damage to hardware or software.

IMPORTANT:

An alert that calls attention to essential information.

NOTE:

An alert that contains additional or supplementary information.

TIP:

An alert that provides helpful information.

Network topology icons

Convention

Description

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that

supports Layer 2 forwarding and other Layer 2 features.

Represents an access controller, a unified wired-WLAN module, or the access

controller engine on a unified wired-WLAN switch.

Represents an access point.

Represents a wireless terminator unit.

Represents a wireless terminator.

Represents a mesh access point.

Represents omnidirectional signals.

Represents directional signals.

Represents a security product, such as a firewall, UTM, multiservice security

gateway, or load balancing device.

Represents a security module, such as a firewall, load balancing, NetStream, SSL

VPN, IPS, or ACG module.

Examples provided in this document

Examples in this document might use devices that differ from your device in hardware model,

configuration, or software version. It is normal that the port numbers, sample output, screenshots,

and other information in the examples differ from what you have on your device.

Documentation feedback

You can e-mail your comments about product documentation to info@h3c.com.

We appreciate your comments.

Contents

Configuring the OAP module·········································································1

Overview····························································································································································1

Compatibility information····································································································································1

Feature and hardware compatibility···········································································································1

Command and hardware compatibility·······································································································1

Logging in to the OAP module···························································································································2

Configuring network parameters for the OAP module ·······················································································2

Configuring network parameters for an OAP module that runs the CVK operating system·······················2

Configuring network parameters for an OAP module that runs the Linux operating system ·····················3

Rebooting the OAP module ·······························································································································4

Index··············································································································5

Configuring the OAP module

Overview

H3C Open Application Architecture provides an open interface for third-party vendors to develop and

integrate value-added applications into H3C products. These applications can apply to one of the

following forms:

•

A standalone network device.

•

A card that can be installed in a network device (Open Application Platform module, or OAP

module).

OAP modules have their own operating systems. You can log in to the operating system of an OAP

module to install features. For example, you can install security features and voice features on the

OAP module operating system to provide security and voice services for users.

OAP modules exchange data, status information, and control information with hosting devices

through internal interfaces.

This feature is supported only on the HMIM-OAP module.

Compatibility information

Feature and hardware compatibility

Hardware

OAP module compatibility

MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/

810-LM-HK/810-W-LM-HK/810-LMS/810-LUS No

MSR2600-6-X1/2600-10-X1 No

MSR 2630 No

MSR3600-28/3600-51 No

MSR3600-28-SI/3600-51-SI No

MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC No

MSR 3610/3620/3620-DP/3640/3660 Yes

MSR5620/5660/5680 Yes

Command and hardware compatibility

Commands and descriptions for centralized devices apply to the following routers:

•

MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L

MS/810-LUS.

•

MSR2600-6-X1/2600-10-X1.

•

MSR 2630.

•

MSR3600-28/3600-51.

•

MSR3600-28-SI/3600-51-SI.

•

MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC.

•

MSR 3610/3620/3620-DP/3640/3660.

Commands and descriptions for distributed devices apply to the following routers:

•

MSR5620.

•

MSR 5660.

•

MSR 5680.

Logging in to the OAP module

From the CLI of the router, you can log in to the operating system of the OAP module. To return to the

CLI of the router, press Ctrl+K.

Perform the following task in user view:

Task

Command

•Distributed devices in standalone mode/centralized

devices in standalone or IRF mode:

oap connect slot slot-number system system-name

•Distributed devices in IRF mode:

oap connect chassis chassis-number slot

slot-number system system-name

Configuring network parameters for the OAP

module

After logging in to the operating system of an OAP module, you can configure network parameters

for the module as prompted.

Configuring network parameters for an OAP module that runs

the CVK operating system

In the following example, the OAP module is installed in slot 4 on the router.

1. Log in to the operating system of the OAP module as user root.

<System> oap connect slot 0 system 4

Connected to OAP

CentOS release 5.4 (Final)

Kernel 2.6.18-164.el5 on an x86_64

cvknode login: root

Password:

Last login: Tue Mar 12 04:10:46 CST 2013 on ttyS0

0 packages can be updated.

0 updates are security updates.

Your network has not been configured, do you want to configure it now?[y/n]

2. Enter y. To enter the operating system without configuring network parameters, enter n.

Your network has not been configured, do you want to configure it now?[y/n]y

Current configuration is:

hostname: cvknode

ipaddress: 192.168.0.162

netmask: 255.255.255.0

gateway: 192.168.0.1

network: 192.168.0.0

broadcast: 192.168.0.255

nameserver: 192.168.0.1

Please input hostname:

3. Configure network parameters as prompted.

Please input hostname: host1

Please input ipaddress: 192.168.0.167

Please input netmask: 255.255.255.0

Please input gateway: 192.168.0.1 (This setting is optional.)

Please input nameserver: 192.168.0.1 (This setting is optional.)

The hostname is cvknode by default. After you complete the configuration, the following

prompt appears:

Current input is corret?[y/n]y

4. Press yto confirm the settings. To change the settings, press nand repeat step 3.

The following prompt appears:

Would you want to save?[y/n]y

5. Press yto save the settings or press nto discard the settings.

You are logged in to the operating system of the OAP module. The operating system prompt

appears:

root@ cvknode:

To modify the network settings, use the /usr/bin/init_net/init_net.sh command and repeat step 2

through step 5.

6. To change the login password, execute the following command:

root@ cvknode:~# passwd root

Enter new UNIX password:

Retype new UNIX password:

passwd: password updated successfully

The password is case sensitive and can contain letters, digits, and special characters.

Configuring network parameters for an OAP module that runs

the Linux operating system

In the following example, the OAP module is installed in slot 4 on the router.

# Log in to the operating system of the OAP module as user root.

<System> oap connect slot 0 system 4

Connected to OAP

CentOS release 5.4 (Final)

Kernel 2.6.18-164.el5 on an x86_64

localhost login: root

Password: root

Last login: Wed Feb 8 16:58:27 on ttyS0

[root@localhost ~]#

Rebooting the OAP module

CAUTION:

Rebooting the OAP module might cause a service outage.

IMPORTANT:

To avoid service data loss, close the operating system of the

OAP module before rebooting the

module.

You can reboot the OAP module if it fails or is not operating correctly. Pressing the reboot button of

the OAP module has the same effect. The router can still identify and control the OAP module after

the reboot.

Perform the following task in user view:

Task

Command

Reboot the OAP module.

•Distributed devices in standalone mode/centralized

devices in standalone or IRF mode:

oap reboot slot slot-number system system-name

•Distributed devices in IRF mode:

oap reboot chassis chassis-number slot slot-number

system system-name

Altri manuali per MSR Series

Indice

Altri manuali H3C Router di rete

H3C

H3C H3C S7500E Series Manuale di installazione

H3C

H3C CR16000-F Manuale operativo e di manutenzione

H3C

H3C S5500-EI series Manuale utente

H3C

H3C CR16000-M Manuale utente

H3C

H3C MSR5620 Manuale utente

H3C

H3C SecPath L5000-S Manuale operativo e di manutenzione

H3C

H3C CR19000-16 Manuale utente

H3C

H3C MSR600 Series Manuale utente

H3C

H3C CR16000-F Manuale utente

H3C

H3C S12508CR Manuale operativo e di manutenzione

H3C

H3C S5800-60C-PWR Manuale utente

H3C

H3C RA10 Manuale utente

H3C

H3C SR6600 SPE-FWM Manuale utente

H3C

H3C SR6600 Series Manuale utente

H3C

H3C S3100-52P Manuale utente

H3C

H3C S5500-SI Series Manuale utente

H3C

H3C H3C S7500E Series Istruzioni per l'installazione

H3C

H3C S3100-52P Istruzioni per l'installazione

H3C

H3C SR6604 Manuale utente

H3C

H3C RA5100 Manuale utente

H3C

H3C S7500 Series Istruzioni per l'installazione

H3C

H3C MSR 20-1X Manuale utente

H3C

H3C MSR 5600 Manuale di installazione

H3C

H3C MSR 20-20 Manuale

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza