H3C S3100V2 Series Manuale utente

H3C S3100V2 Switch Series

Installation Guide

Hangzhou H3C Technologies Co., Ltd.

http://www.h3c.com

Document version: 6W103-20110808

No part of this manual may be reproduced or transmitted in any form or by any means without prior

written consent of Hangzhou H3C Technologies Co., Ltd.

Trademarks

H3C, , Aolynk, , H3Care,

, TOP G, , IRF, NetPilot, Neocean, NeoVTL,

SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT,

XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co.,

Ltd.

All other trademarks that may be mentioned in this manual are the property of their respective owners

Notice

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute the warranty of any kind, express or implied.

Environmental protection

This product has been designed to comply with the environmental protection requirements. The storage,

use, and disposal of this product must meet the applicable national laws and regulations.

Preface

The H3C S3100V2 Switch Series Installation Guide guides you through the installation of your switch.

It covers product overview, preparing for installation, installing the switch, logging in to the switch,

connecting the switch to the network, and troubleshooting.

This preface includes:

•Audience

•Conventions

•Obtaining documentation

•Technical support

•Documentation feedback

Audience

This documentation is intended for:

•Network planners

•Field technical support and servicing engineers

•Network administrators working with the S3100V2 switch series

Conventions

This section describes the conventions used in this documentation set.

GUI conventions

Convention Description

Boldface Window names, button names, field names, and menu items are in Boldface. For

example, the New User window appears; click OK.

> Multi-level menus are separated by angle brackets. For example, File > Create > Folder.

Convention Description

< > Button names are inside angle brackets. For example, click <OK>.

[ ] Window names, menu items, data table and field names are inside square brackets. For

example, pop up the [New User] window.

/ Multi-level menus are separated by forward slashes. For example, [File/Create/Folder].

Symbols

Convention Description

WARNING An alert that calls attention to important information that if not understood or followed can

result in personal injury.

CAUTION An alert that calls attention to important information that if not understood or followed can

result in data loss, data corruption, or damage to hardware or software.

IMPORTANT An alert that calls attention to essential information.

NOTE An alert that contains additional or supplementary information.

TIP An alert that provides helpful information.

Network topology icons

Represents a generic network device, such as a router, switch, or firewall.

Represents a routing-capable device, such as a router or Layer 3 switch.

Represents a generic switch, such as a Layer 2 or Layer 3 switch, or a router that supports

Layer 2 forwarding and other Layer 2 features.

Obtaining documentation

You can access the most up-to-date H3C product documentation on the World Wide Web at

http://www.h3c.com.

Click the links on the top navigation bar to obtain different categories of product documentation:

[Technical Support & Documents > Technical Documents] – Provides hardware installation, software

upgrading, and software feature configuration and maintenance documentation.

[Products & Solutions] – Provides information about products and technologies, as well as solutions.

[Technical Support & Documents > Software Download] – Provides the documentation released with the

software version.

Technical support

customer_service@h3c.com

http://www.h3c.com

Documentation feedback

You can e-mail your comments about product documentation to [email protected].

We appreciate your comments.

Contents

Product overview·························································································································································· 1

Switch models····································································································································································1

Panel views ········································································································································································1

S3100V2-26TP-SI/S3100V2-26TP-EI ····················································································································1

S3100V2-16TP-SI/S3100V2-16TP-EI ····················································································································2

S3100V2-8TP-SI/S3100V2-8TP-EI ·························································································································3

S3100V2-26TP-PWR-EI············································································································································4

S3100V2-16TP-PWR-EI············································································································································5

S3100V2-8TP-PWR-EI ··············································································································································6

Preparing for installation ············································································································································· 8

Safety recommendations ··················································································································································8

General safety recommendations···························································································································8

Safety with electricity ···············································································································································8

ESD prevention ·························································································································································8

Safety with laser ·······················································································································································9

Examining the installation site ·········································································································································9

Temperature requirements ·······································································································································9

Humidity requirements ·············································································································································9

Cleanness requirements········································································································································ 10

EMI requirements··················································································································································· 10

Grounding requirements······································································································································· 11

Cooling requirements············································································································································ 11

Space requirements··············································································································································· 11

Installation tools······························································································································································ 12

Installing the switch····················································································································································13

Installation flow of the switch········································································································································ 13

Installing the switch ························································································································································ 13

Selecting an installation method·························································································································· 13

Installation accessories ········································································································································· 14

Installing the switch into the 19-inch rack··········································································································· 18

Mounting the switch on a workbench················································································································· 24

Mounting the switch on a wall····························································································································· 25

Magnet mounting ·················································································································································· 27

Grounding the switch ···················································································································································· 28

Grounding cable ··················································································································································· 28

Grounding the switch with a grounding strip····································································································· 28

Grounding the switch with a grounding conductor buried in the earth ground············································· 30

Grounding the switch with the PE wire of an AC power supply······································································ 31

Connecting the power cord ·········································································································································· 32

Connecting the AC power cord··························································································································· 32

Connecting the DC power cord··························································································································· 33

Verifying the installation················································································································································ 34

Logging in to the switch·············································································································································36

Preparations before login ····································································································································· 36

Console cable························································································································································ 36

Setting up a configuration environment ·············································································································· 37

Setting terminal parameters·································································································································· 37

Powering on the switch·················································································································································· 40

Checking switch boot information······················································································································· 40

Initially configuring the switch······························································································································ 42

Connecting the switch to the network·······················································································································43

Connecting your switch to the network through twisted pair cables ·······························································43

Connecting your switch to the network through optical fibers ········································································· 43

Installing an SFP transceiver module ··················································································································· 44

Connecting an optical fiber connector to an SFP transceiver module····························································· 44

Troubleshooting··························································································································································46

Troubleshooting on startup············································································································································ 46

Troubleshooting the power supply system··················································································································· 46

Troubleshooting interfaces ············································································································································ 47

Troubleshooting the PoE system···································································································································· 47

Troubleshooting software loading································································································································ 48

Appendix A Technical specifications························································································································49

S3100V2-SI Switch Series technical specifications···································································································· 49

S3100V2-EI Switch Series technical specifications···································································································· 50

S3100V2-TP-EI switches technical specifications······························································································· 50

S3100V2-TP-PWR-EI switches technical specifications······················································································ 51

Appendix B Ports and LEDs·······································································································································53

Ports ················································································································································································· 53

Console port··························································································································································· 53

10/100Base-TX Ethernet port ······························································································································ 53

Combo interface···················································································································································· 53

10/100/1000Base-T Ethernet port ···················································································································· 54

100/1000Base-X SFP port··································································································································· 54

LEDs ················································································································································································· 55

LEDs for the S3100V2-TP-SI/S3100V2-TP-EI switches······················································································· 55

LEDs on the S3100V2-TP-PWR-EI switches ········································································································· 56

Appendix C Ethernet twisted pair cable ··················································································································59

Ethernet twisted pair cable············································································································································ 59

RJ-45 connector ····················································································································································· 59

Cable pinouts························································································································································· 59

Cable type······························································································································································ 59

Pin assignments······················································································································································ 61

Making an Ethernet twisted pair cable ··············································································································· 62

Index ···········································································································································································63

Product overview

Switch models

Table 1 lists the switch models in the H3C S3100V2 Switch Series.

Table 1 H3C S3100V2 Switch Series

Sub-series Switch models

S3100V2-SI S3100V2-TP-SI

(fanless)

•S3100V2-8TP-SI

•S3100V2-16TP-SI

•S3100V2-26TP-SI

S3100V2-TP-EI

(fanless)

•S3100V2-8TP-EI

•S3100V2-16TP-EI

•S3100V2-26TP-EI

S3100V2-EI

S3100V2-TP-PWR-EI

(built-in fans)

•S3100V2-8TP-PWR-EI

•S3100V2-16TP-PWR-EI

•S3100V2-26TP-PWR-EI

Panel views

S3100V2-26TP-SI/S3100V2-26TP-EI

Front panel

Figure 1 S3100V2-26TP-SI/S3100V2-26TP-EI front panel

(1) Speed LED for a 10/100Base-TX Ethernet port (2) 10/100Base-TX Ethernet port

(3) Speed LED for a combo interface (4) Console port

(5) Combo interface (10/100/1000Base-T Ethernet port on the left,

100/1000Base-X SFP port on the right)

(6) Link/Act LED for a combo

interface

(7) Link/Act LED for a 10/100Base-TX Ethernet port (8) Power LED

Rear panel

Figure 2 S3100V2-26TP-SI/S3100V2-26TP-EI rear panel

(1) Grounding screw (2) AC-input power receptacle

S3100V2-16TP-SI/S3100V2-16TP-EI

Front panel

Figure 3 S3100V2-16TP-SI/S3100V2-16TP-EI front panel

123

567

(1) Speed LED for a 10/100Base-TX Ethernet port (2) 10/100Base-TX Ethernet ports

(3) Speed LED for a combo interface (4) Console port

(5) Combo interface (10/100/1000Base-T Ethernet port

on the left, 100/1000Base-X SFP port on the right)

(6) Link/Act LED for a combo interface

(7) Link/Act LED for a 10/100Base-TX Ethernet port (8) Power LED

Rear panel

Figure 4 S3100V2-16TP-SI/S3100V2-16TP-EI rear panel

(1) Grounding screw (2) AC-input power receptacle

S3100V2-8TP-SI/S3100V2-8TP-EI

Front panel

Figure 5 S3100V2-8TP-SI/S3100V2-8TP-EI front panel

(1) Speed LED for a 10/100Base-TX Ethernet port (2) 10/100Base-TX Ethernet ports

(3) Speed LED for a combo interface (4) Console port

(5) Combo interface (10/100/1000Base-T Ethernet port

on the left, 100/1000Base-X SFP port on the right)

(6) Link/Act LED for a combo interface

(7) Link/Act LED for a 10/100Base-TX Ethernet port (8) Power LED

Rear panel

Figure 6 S3100V2-8TP-SI/S3100V2-8TP-EI rear panel

1 2

(1) Grounding screw (2) AC-input power receptacle

S3100V2-26TP-PWR-EI

Front panel

Figure 7 S3100V2-26TP-PWR-EI front panel

(1) 10/100Base-TX Ethernet port (2) 10/100Base-TX Ethernet port LEDs (left: yellow,

right: green)

(3) Combo interface (10/100/1000Base-T Ethernet

port on the left, 100/1000Base-X SFP port on the right)

(4) LINK LED for a combo interface

(5) Console port (6) Port LED mode switching (Mode) button

(7) Power (PWR) LED (8) Port mode (A/L) LED

(9) Port mode (D/S) LED (10) ACT LED for a combo interface

Rear panel

Figure 8 S3100V2-26TP-PWR-EI rear panel

(1) AC-input power receptacle (2) DC-input terminal block

(3) Grounding screw

Altri manuali per S3100V2 Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali H3C Interruttore

H3C

H3C S9500 Series Manuale utente

H3C

H3C S1850-X Series Manuale utente

H3C

H3C S10504 Manuale utente

H3C

H3C S9500 Series Manuale utente

H3C

H3C S12500 Series Guida rapida

H3C

H3C S5150-EI Series Manuale utente

H3C

H3C S5110V2 Series Manuale utente

H3C

H3C S6850-56HF Manuale operativo e di manutenzione

H3C

H3C S5820 series Manuale di installazione

H3C

H3C S6800 Series Manuale utente

H3C

H3C S3610 Series Manuale utente

H3C

H3C S3610 Series Manuale utente

H3C

H3C S5500-EI series Manuale utente

H3C

H3C S5130S-EI series Manuale utente

H3C

H3C S9500 Series Manuale utente

H3C

H3C S10504 Manuale utente

H3C

H3C S9500 Series Manuale utente

H3C

H3C S3100 Series Manuale utente

H3C

H3C S1200 Series Manuale utente

H3C

H3C S9500 Series Istruzioni per l'installazione

H3C

H3C S9500 Series Manuale utente

H3C

H3C S5120-SI Series Manuale utente

H3C

H3C S5500-EI series Manuale utente

H3C

H3C S3610 Series Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente