H3C S5500-SI Series Manuale utente

Tool list

Mounting the switch to a rack

Introduction to installation accessories

Before installation, wear an ESD-preventive wrist strap, and make sure that the wrist strap

has a good skin contact and is well grounded.

When the depth of a switch is greater than 300 mm (11.81 in), the front mounting

brackets only secure the switch rather than bear its weight.

Flathead

screwdriver

Phillips

screwdriver

ESD-preventive wrist

strap

Needle-nose

pliers

Wire-stripping

pliers

Diagonal

pliers

Blow dryer

Grounding cable

Front mounting bracket

and M4 screws

Cage nut (User supplied)

Rear mounting bracket

and load-bearing screw

Rubber pads

M6 screw (User supplied) Bail latch

The installation tools are not provided with the switch. Prepare them by yourself.

Method 1—Using only front mounting brackets

Install front

mounting brackets

Install cage nuts to the

square holes of the rack

Method 2—Using front and rear mounting brackets

Install the load-

bearing screw

Install the front mounting

bracket

Install cage nuts to the

square holes of the rack

Mount the rear mounting

brackets to the square holes on

the rear post of the rack

Mounting the switch to a workbench

Stick the rubber pads to the appropriate

positions on the switch bottom

Connecting the grounding cable

Method 2 +12 VDC (RPS)

123

You can use only the RPS power supply recommended by H3C (optional RPS power

supply and power cable) for RPS DC input.

Install an OT terminal on the other end of the grounding

cable, and connect the OT terminal to the grounding strip.

Connect the OT terminal of the

grounding cable to the switch

Connecting the power cable

Before connecting the power cable, connect the grounding cable and make sure that

the switch is correctly grounded.

Connect the power cable to the switch first and then to the power supply system to

avoid bodily injury.

Connect the AC power cable

Install the bail latch

123

Connect the power

cable to the receptacle

Secure the bail latch over

the power cable

Connect the DC power cable

Method 1 –52 VDC to –55 VDC (RPS)

For more information about the product and installation procedures, log in to www.h3c.com

Altri manuali per S5500-SI Series

Altri manuali H3C Interruttore

H3C

H3C S12500X-2L Manuale utente

H3C

H3C S9500E Series Manuale di installazione

H3C

H3C A3600 Series Manuale utente

H3C

H3C S3600-28PSI Manuale utente

H3C

H3C S12500 Series Manuale utente

H3C

H3C S9500 Series Manuale utente

H3C

H3C S12500 Series Manuale utente

H3C

H3C S6890 Series Manuale di installazione

H3C

H3C S5820V2-48S Guida utente

H3C

H3C S5820V2H Manuale utente

H3C

H3C S5830V2 series Manuale utente

H3C

H3C T300M-XS Manuale operativo e di manutenzione

H3C

H3C S7500 Series Manuale utente

H3C

H3C S12508-AC Manuale utente

H3C

H3C S7500X Series Manuale utente

H3C

H3C S3610 Series Manuale utente

H3C

H3C S7500 Series Manuale utente

H3C

H3C S12500 Series Manuale utente

H3C

H3C S7500X Series Manuale utente

H3C

H3C S9500 Series Istruzioni per l'installazione

H3C

H3C S6890 Series Manuale utente

H3C

H3C S12500-X Manuale utente

H3C

H3C S7500 Series Manuale utente

H3C

H3C S3610 Series Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente