H3C S9500 Series Manuale utente

Operation Manual – IP Performance

H3C S9500 Series Routing Switches Table of Contents

Table of Contents

Chapter 1 IP Performance Configuration....................................................................................1-1

1.1 Configuring IP Performance ..............................................................................................1-1

1.1.1 Configuring TCP Attributes .....................................................................................1-1

1.1.2 Configuring the Switch Whether to Send a Time Exceeded ICMP Packet.............1-2

1.2 Displaying and Maintaining IP Performance......................................................................1-2

1.3 Troubleshooting IP Performance.......................................................................................1-4

Operation Manual – IP Performance

H3C S9500 Series Routing Switches Chapter 1 IP Performance Configuration

1-1

Chapter 1 IP Performance Configuration

When configuring IP performance, go to these sections for information you are

interested in:

zConfiguring IP Performance

zDisplaying and Maintaining IP Performance

zTroubleshooting IP Performance

1.1 Configuring IP Performance

IP performance configuration includes:

zConfiguring TCP Attributes

zConfiguring the Switch Whether to Send a Time Exceeded ICMP Packet

1.1.1 Configuring TCP Attributes

TCP attributes include:

zsynwait timer: When sending the syn packets, TCP starts the synwait timer. If

response packets are not received before synwait timeout, the TCP connection is

terminated. The timeout of synwait timer ranges from 2 to 600 seconds and it is 75

seconds by default.

zfinwait timer: When the TCP connection state turns from FIN_WAIT_1 to

FIN_WAIT_2, finwait timer is started. If FIN packets are not received before finwait

timer timeout, the TCP connection is terminated. The timeout of finwait timer

ranges from 76 to 3600 seconds and it is 675 seconds by default.

zThe receiving/sending buffer size of the connection-oriented socket is in the range

from 1 to 32 KB and is 8 KB by default.

Perform the following configuration in system view to configure TCP attributes:

To do… Use the command…

Configure timeout time for the synwait

timer in TCP tcp timer syn-timeout time-value

Restore the default timeout time of the

synwait timer undo tcp timer syn-timeout

Configure timeout time for the

FIN_WAIT_2 timer in TCP tcp timer fin-timeout time-value

Restore the default timeout time of the

FIN_WAIT_2 timer undo tcp timer fin-timeout

Configure the socket receiving/sending

buffer size of TCP tcp window window-size

Operation Manual – IP Performance

H3C S9500 Series Routing Switches Chapter 1 IP Performance Configuration

1-2

To do… Use the command…

Restore the socket receiving/sending

buffer size of TCP to default value undo tcp window

1.1.2 Configuring the Switch Whether to Send a Time Exceeded ICMP Packet

The switch will return a destination unreachable packet to the sender when receiving a

packet whose TTL is "1”. But if an attacker continuously sends IP packets whoseTTL is

“1”, the switch will reply to this attacker with a destination unreachable packet

ceaselessly. As a result, the CPU of the switch is attacked.

When the switch receives IP packets whose TTL is “1”, if the switch sends a “time

exceeded" ICMP error packet, instead of with a destination unreachable packet to the

network management system, such an attack can be avoided.

Follow these steps to configure the switch whether to send a destination unreachable

packet:

To do… Use the command… Remarks

Enter system view system-view —

Configure the switch to send a

“time exceeded” ICMP error

packet to the IP packet sender

when the switch receives a

packet whose TTL is “1”

ip icmp-time-exceed

enable

By default, the switch

sends a "time

exceeded” ICMP error

packet to the network

management system.

Configure the switch to return a

destination unreachable packet

to the sender when the switch

receives a packet whose TTL is

“1”

undo ip

icmp-time-exceed

enable —

1.2 Displaying and Maintaining IP Performance

Displaying IP performance:

To do… Use the command… Remarks

Display the states of all the TCP

connections display tcp status

Display TCP connection statistics data display tcp statistics

Display UDP statistics information display udp statistics

Display IP statistics information display ip statistics

Available in

any view

Operation Manual – IP Performance

H3C S9500 Series Routing Switches Chapter 1 IP Performance Configuration

1-3

To do… Use the command… Remarks

Display ICMP statistics information display icmp statistics

Display the current socket information

of the system

display ip socket

[socktype sock-type ]

[task-id socket-id ]

Display the summary of the

Forwarding Information Base (FIB) display fib [ all ]

Display the FIB entries matching the

specified destination IP address

display fib [ all ]

[ip-address [ mask |

mask-length ] [ longer ] ]

Display the FIB entries matching the

specified destination IP address range

display fib [ all ]

ip-address1 {mask1 |

mask-length1 }

ip-address2 {mask2 |

mask-length2 }

Display the FIB entries permitted by a

specific ACL display fib [ all ]acl

{ number | name }

Display the FIB entries in the buffer

which begin with, include or exclude

the specified character string

display fib [ all ]|

{ { begin | include |

exclude } text }

Display the FIB entries permitted by a

specific prefix list display fib [ all ]

ip-prefix listname

Display the total number of the FIB

entries display fib [ all ]

statistics

Available in

any view

Debuging IP performance

To do… Use the command… Remarks

Reset IP statistics information reset ip statistics

Reset TCP statistics information reset tcp statistics

Reset UDP statistics information reset udp statistics

Available in

user view

Enable the debugging of IP packets debugging ip packet [ acl

acl-number ] Available in

user view

Operation Manual – IP Performance

H3C S9500 Series Routing Switches Chapter 1 IP Performance Configuration

1-4

To do… Use the command… Remarks

Disable the debugging of IP

packets undo debugging ip packet

Enable the debugging of ICMP

packets debugging ip icmp

Disable the debugging of ICMP

packets undo debugging ip icmp

Enable the debugging of UDP

connections debugging udp packet

[task-id socket-id ]

Disable the debugging of UDP

connections undo debugging udp

packet [task-id socket-id ]

Enable the debugging of TCP

connections debugging tcp packet

[task-id socket-id ]

Disable the debugging of TCP

connections undo debugging tcp

packet [task-id socket-id ]

Enable the debugging of TCP

events debugging tcp event

[task-id socket-id ]

Disable the debugging of TCP

events undo debugging tcp event

[task-id socket-id ]

Enable the debugging of the MD5

authentication debugging tcp md5

Disable the debugging of the MD5

authentication undo debugging md5

Available in

user view

1.3 Troubleshooting IP Performance

Fault: IP layer protocol works normally but TCP and UDP cannot work normally.

Troubleshoot: In the event of such a fault, you can enable the corresponding debugging

information output to view the debugging information.

zUse the display command to view the running information of IP performance and

make sure that the PCs used by the user is running normally.

zUse the terminal debugging command to output the debugging information to the

console.

zUse the debugging udp packet command to enable the UDP debugging to trace

the UDP packet.

The following are the UDP packet formats:

UDP output packet:

Source IP address:202.38.160.1

Source port:1024

Destination IP Address 202.38.160.1

Operation Manual – IP Performance

H3C S9500 Series Routing Switches Chapter 1 IP Performance Configuration

1-5

Destination port: 4296

task = ROUT(15)

socketid = 6,

src = 192.168.1.1:520,

dst = 255.255.255.255:520,

datalen = 24

zUse the debugging tcp packet command to enable the TCP debugging to trace

the TCP packets.

Operations include:

<H3C> terminal debugging

<H3C> debugging tcp packet

Then the TCP packets received or sent can be checked in real time. Specific packet

formats include:

TCP output packet:

Source IP address:202.38.160.1

Source port:1024

Destination IP Address 202.38.160.1

Destination port: 4296

Sequence number :4195089

Ack number: 0

Flag :SYN

Packet length :60

Data offset: 10

task = ROUT(15)

socketid = 5

state = Established

src = 172.16.1.2

Source port:1025

dst = 172.16.1.1

Destination port: 4296

seq = 1921836502

ack = 4192768493

flag = ACK

window = 16079

Altri manuali per S9500 Series

Indice

Altri manuali H3C Interruttore

H3C

H3C S9500 Series Istruzioni per l'installazione

H3C

H3C S6825 Series Manuale utente

H3C

H3C T300M-XS Manuale operativo e di manutenzione

H3C

H3C S12500 Series Manuale utente

H3C

H3C H3C S7500E Series Manuale utente

H3C

H3C S6825-54HF Manuale utente

H3C

H3C S9500 Series Manuale utente

H3C

H3C S7500E-XS Series Manuale di installazione

H3C

H3C S5120-EI Series Manuale di installazione

H3C

H3C S9820-8C Manuale utente

H3C

H3C S7500 Series Istruzioni per l'installazione

H3C

H3C S10500 Series Manuale di installazione

H3C

H3C S6800 Series Manuale utente

H3C

H3C S12500X-AF Series Manuale utente

H3C

H3C S9500 Series Manuale utente

H3C

H3C S7500X Series Manuale utente

H3C

H3C S10500 Series Manuale utente

H3C

H3C S5120-EI Series Manuale utente

H3C

H3C S5590-HI Series Manuale utente

H3C

H3C S9804 Manuale utente

H3C

H3C S7500X Series Manuale utente

H3C

H3C s5800 series Manuale utente

H3C

H3C S12500 Series Guida rapida

H3C

H3C S9500 Series Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente