Haier HYC-260-360 Manuale utente

HYC-260-360

Operation Manual

Read the Operation Manual carefully before using your appliance

.

Keep the Operation Manual in a safe place.

Appearance, color and la

y

out of the door ma

y

var

y

.

Pharmaceutical Refrigerator

10

11

12

1) The appliance should be connected to a dedicated socket for 220V/50Hz power

supply.Allow some time lapse before loading the appliance.

2) The warning sound signal may be heard when the appliance is first connected to the

power source and can be inactivated by pressing the buzzer buttom. The warning

indicator stays on until the temperature of the test bottle sensor reaches 5 2 .

3) Ensure that the two test bottles are filled with 10% glycol solution.(see article 4,section

installation on page 6).

4) The appliance is preset during manufacture for operation temperature 2~8 .

Inner ligh

t

B

attery

switch

Lamp

switch

Control

pannel

Shelf

Door handle Casters

1.Control panel

The operation mode and temperature are displayed on the control panel. Pressing the

button on the control panel will display the current temperature and warning data.

2.Light switch

Control of the lights inside the appliance.

3.Battery switch

Rechargeable battery switch for control of power interruption. Position 1 for On, and

Position 0 for Off.

The switch must be set to position On while the appliance is in operation.

Set the battery switch to position Off if the appliance is not used for a long

period.

4.Door handle

Elegant design and unique finish.

5.Casters

Casters designed for free movement of the appliance.

6.Shelf

7.Inner light

15W

Caution:

Caution:

8

Temperature detected by

upper or lower sensor 8

Tempreture detected by

upper or lower sensor 2

Temperature detected by

sensor 8 or 2

1.Temperature display

Preset temperature of the appliance is 5 2 .

Preset warning point of high temperature is 8 ,and of low temperature is 2 .

Caution:Displayed temperature is detected by test bottles for upper and lower sections of

the appliance, and does not always remain at 5 .The information displayed by the snesor

indicates the average temperature.

Temperature adjusting:

Press and hold both SENSOR SELECT button and CALIB CANCEL button for more than 3s until

original setting starts flashing to indicate that it enters temperature setting mode. With each press

of CALIB CANCEL button, temperature setting increases 0.1 until reaching upper limit, which

is defaulted as 8 . If press again, it returns to lower limit, which is defaulted as 2 . It repeats the

above cycle. When it reaches your desired temperature, if you don't press the button within 5s,

the temperature setting will be saved and it automatically quits the temperature setting mode (the

temperature setting range programmed at factory is 2 - 8 ). The display returns to display inside

sensor temperature or average temperature before setting is made (not flashing).

Indice

Altri manuali Haier Frigorifero

Manuali Frigorifero popolari di altre marche

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manuale utente

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manuale utente

Sharp

Sharp SJ-BA31IEXW2-EU Manuale utente

CORBERO

CORBERO CC2300MCW Manuale utente

KitchenAid

KitchenAid 2205264 Manuale utente

Stengel

Stengel KU 1101 A++ Manuale utente

NEFF

NEFF KI181 Series Manuale utente

Hoshizaki

Hoshizaki Reach-In Manuale utente

Amana

Amana ASD2524VES00 Manuale utente

BOMANN

BOMANN KGC 213 Manuale utente

Danby

Danby DAR044A1SLDD Istruzioni per il montaggio

Samsung

Samsung RF323TE Manuale utente

Beko

Beko CSA31022 Manuale utente

IKEA

IKEA FROSTIG C 185 E Manuale utente

Electrolux

Electrolux ER 6821 D Manuale utente

True

True TS-28 Manuale utente

Frigidaire

Frigidaire FSC23R5DW9 Manuale utente

Beko

Beko LSP4579W Manuale utente