HANSCRAFT TP 700 Manuale utente

USER MANUAL

TP 700

Contents

1 Hottubperformancespecications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Preparation for the installation of the hot tub . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Preparation of the place for installation and connection to electricity . . . . . . . . . . . . . 4

2.2 Preparation for the interior hot tub installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.3 Preparation for the exterior hot tub installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3 Installation of the hot tub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.1 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.2 Filling the hot tub with water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.3 Running the power supply of the hot tub. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.4 Programming of the hot tub control unit using the control panel . . . . . . . . . . . . . . . . 6

4 Aquatic AV audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5.1 Main displayed data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5.2 User interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.3 Run spa devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.4 Spa behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5.5 Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5.6 Setltercycletimes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5.7 Set time-of-day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5.8 Heat settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.8.1 Heat modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.8.2 Heat modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5.8.3 Temperature ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

5.8.4 M8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

5.8.5 Change the set temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

5.9 Invert display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

5.10 Restrict operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5.11 Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6 Panel messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.1 General messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

6.2 Heater-related messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

6.3 Sensor-related messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

6.4 System-related messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

6.5 Reminder messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

6.6 Miscellaneous messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

6.7 Message notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

6.8 Fault log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

7 Supplements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

8 Upkeep of the hot tub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

8.1 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

8.2 Removalandcleaningoftheltercartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

8.3 Maintaining the quality of the water in the hot tub . . . . . . . . . . . . . . . . . . . . . . . . . 36

8.4 Replacing the water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

8.5 Cleaning the outer shell of the hot tub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

8.6 Hot tub hygiene and disinfection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

8.7 Thermo cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

8.8 Upkeep of the thermo cover and upkeep instructions . . . . . . . . . . . . . . . . . . . . . . . . 38

9 Winter and summer time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

9.1 Winter time – using the hot tub, all year operation (SLP) . . . . . . . . . . . . . . . . . . . . . . 39

9.2 Summer time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

10 Final establishments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

10.1 Guarantee conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

10.2 Safe disposal of the product after the service life . . . . . . . . . . . . . . . . . . . . . . . . . . 39

10.3 Warranty claims and repair services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

11 Repair services chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Hot tub performance specifications

1 Hot tub performance specifications

Performance specifications

nominal voltage: three-phase connect. 230/400 V 50 Hz*

maximum work current: 3× 16 A

current surge: up to 3× 25 A

voltage resistance: 1 250 V/min. without puncturing

insulation resistance: >=1MΩ

water resistance: IPX5

electrical shock protection: rstlevel

*The product does not use 400 V phase to phase voltage. It is possible to adjust it to

1× 230 V. When setting to 1× 230 V, it is necessary to observe the cross-section of the

supply wire; namely: CYKY – 3× 10. A circuit breaker and Residual Current protective

Device 32 A, according to the applicable standards of the country where the product is

installed. This setting is necessary to maintain all functions of the tub.

Stress load

heating: 1× 230 V/3 kW/13.6 A

ozone: 1× 230 V/50 Hz /80 mA

blower: 1× 230 V/0.66 kW/ 2.9 A

circulation pump 1/1 + 1/1: 2.2 kW + 2.2 kW + 0.4 kW

overall wattage (depends on the hot tub type):

8.5 kW / h

protection class: I.

lighting: LED 12 V/10 W

maximum output: 20 W

Preparation and electrical connection options – AC three-phase

current 3× 230/400 V/16 A/20 A

Ensure that the hot tub is always connected to a circuit protected by a Residual Current

protective Device with a rated tripping current of 0,03 A. It is necessary to use

For your own safety and the safety of your product, please observe the

following instructions. Read the following information carefully and follow

the user manual exactly when using the hot tub to avoid damaging the product

or the risk of injury. This appliance is intended for use by children 8 years of

age or older with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, provided they are under supervision or have been

instructed on the use of the product and understand the risks. Children must

not play with the product. Cleaning and maintenance must not be performed by

children without supervision.

Preparation for the installation of the hot tub

a Type C or Type D circuit breaker with a rated current of 16 A (motor circuit breaker)

downstream of the Residual Current protective Device.

Recommended Type C circuit breaker

Hot tubs with two massage motors: 3× 16 A/C or D

Hot tubs with three massage motors: 3× 20 A/C or D

!!! THE HOT TUB MUST BE INSTALLED BY AN ELECTRICIAN WITH THE

APPROPRIATE QUALIFICATION ONLY !!!

2 Preparation for the installation of the

hot tub

Check the hot tub first before the installation. Immediately contact the

seller in case any of the parts are broken or missing. Make sure that all the

components correspond to your order

. Check the hot tub before every use.

In case of any damage, do not use the hot tub.

2.1 Preparation of the place for installation and connection to

electricity

The hot tub must be installed on a at, suciently solid base plate, taking into

account the load-bearing capacity of the building. If the hot tub is installed outdoors,

we recommend constructing a concrete monolithic base slab with a minimum strength

(thickness) of 10 cm. It is important to also always select the load-bearing capacity of

the base slab with regard to the dimensions and the weight of the hot tub. Consult

your building supervisor. The weight is specied in the technical description of the

given hot tub. The tubs are prepared by us for an electrical connection of

3× 230 V/400 V~ alternating current. Therefore, use a circuit breaker 3× 16 A/C or D,

alternatively 3× 20 A/C or D and a Residual Current protective Device corresponding

to this connection. Furthermore, it is necessary to have a cable with parameters

corresponding to the rightful regulations for this type of connection. The cable must

also have 4 usable meters at the location of the hot tub, so that it can be pulled

through and connected to the control unit without complications. Do not route the

cable under the hot tub!

YES

Preparation/Installation of the hot tubPreparation for the installation of the hot tub

2.2 Preparation for the interior hot tub installation

If the hot tub is installed in an interior space, it is necessary to comply with safety

instructions. The basic safety requirements are mainly non-skid oors and drainage in

the place of the installation in case of a water overow. It is also crucial to keep in mind

that the humidity around the hot tub will rise and can damage surrounding electric ap-

pliances. Therefore we recommend customizing the place of the installation according

to these conditions. The hot tub should be accessible from all sides for future repair

services. If it is not suciently accessible during the guarantee period, the owner has

a duty to ensure the access.

2.3 Preparation for the exterior hot tub installation

If the hot tub is installed in an exterior space, it is necessary to comply with safety

instructions. The basic safety requirements are mainly non-skid oors and water drain-

age in case of a rainfall or water overow from the hot tub. Therefore we recommend

customizing the place of the installation according to these conditions.

3 Installation of the hot tub

Warning: connection to electricity must be done according to norms valid in

CzechRepublicČSN332000-7-701

3.1 General information

We strongly recommend you to hire professionally trained and qualied technicians

for the process of installation. If you decide to install the hot tub by yourself, please

abide by the following instructions.

a) Carefully remove all the packaging material from the hot tub and position the hot

tub on a beforehand selected place of installation.

b) Demount the front panel on the side of the hot tub control panel. Demount the

upper cover of an electrical wiring under which you can nd a residual current

device, a ground fault circuit interruptor (if it is part of the hot tub equipment)

and a ground staple. The connection itself must be done by a person with an

expert qualication.

c) Every hot tub is tested in real life conditions during the production process,

therefore there is a possibility some technical parts of the hot tub have remained

slightly dirty. We recommend you to clean the surface of the hot tub using a

suitable method; lukewarm water works best for this purpose. Clean the surface

using a soft cloth only. Don't use any rough abrasive means and cloths which could

permanently damage the surface of the hot tub. If you decide to use a generic

cleaning detergent, it cannot be aggressive towards the hot tub surface.

Installation of the hot tub/Audio system Aquatic

3.2 Filling the hot tub with water

Fill the hot tub with a sucient amount of water. The level of water in the hot tub

cannot ever fall under the skimmer level. If you notice a water leak, stop the water

until the defect is xed. Hot tubs do not possess the technology for water-softening

and hard water can be damaging to them. The damages caused by poor handling and

upkeep are not covered by the guarantee.

a) Fill the hot tub through a skimmer to prevent an over aeration of the circulation

pumps.

b) Do not ll the hot tub with water of temperature over 104 °F.

c) Once the water reaches the desired level, put the cartridge lter inside the

skimmer. Tilt the lter during the installation to prevent air bubbles. Only after

removing the air from the lter, install the lter into place.

3.3 Running the power supply of the hot tub

If the hot tub is connected by a moving supply cable, this cable cannot come in con-

tact with sharp objects or be exposed to external forces. Therefore we recommend

putting the supply cable inside a protective case. Turn on a residual current device

intended for a hot tub.

3.4 Programming of the hot tub control unit using the control

panel

Now you can start the programming of the hot tub. The process is described in the

chapter “Control panel”. After you are nish the programming, cover the hot tub with

a thermo cover and let the water temperature to stabilize. Check the water level

inside the hot tub regularly.

4 Aquatic AV audio system

Aquatic AV audio system AQUATIC/MY MUSIC (relevant only for hot tubs equipped

with the system)

If you want to play music from an external device, it is necessary to pair the device

with the hot tub rst (phone, tablet, computer). Turn on the bluetooth system on your

external device and search for the AQUATIC device. The connection is not restricted by

a code and only one connection can be active at a time. You can play music immediately

after the devices are successfully paired. You can control all the functions of the audio

system on your connected external device.

Control panel

Installation of the hot tub/Audio system Aquatic

5 Control panel (BALBOA TP 700)

5.1 Main displayed data

Atemperature range

– high h

– low l

Bheat mode

– ready r

– rest

– ready-in-rest rr

Cozone running o3

Dtime-of-day

Efilter cycles

– filter cycle 1 f1

– filter cycle 2 (optional feature) f2

– filter cycles 1 & 2 f+

Fcleanup cycle (optional feature)

Gpanel locked and/or settings locked

Hwifi (local or cloud connection)

Inavigation arrow

Jheat status

Kselection box

Lmessage (may appear)

– information

– reminder

– error – normal error

or warning

– error – spa will not function until

fixed

Mwater temperature

– fahrenheit temperatures are

displayed without decimal

points (for example, 100 °F is

displayed as 100)

– celsius temperatures are

displayed with decimal points

(for example, 37.5 °C is displayed

as 37.5)

Nwater temperature bar

Oset temperature arrow

Important information about the current state of your spa is displayed on the main

screen. (Not all control systems are conﬁ gured the same. Spa devices, Settings, and

various menu items may vary on your control panel).

main screen

Control panel

5.2 User interface

SPA device buttons navigation buttons

control panel

SPA device buttons

These buttons control various spa devices, such as jets, lights and/or blowers.

Navigation buttons

Navigate the entire menu structure with the 5 navigation buttons on the control

panel. The names shown to the right refer to the navigation buttons in this user guide.

The names will be written in uppercase letters. Operating or changing a selected item

on the panel screen is generally done with the SELECT button (center button).

Selection box

The selection box is a fundamental navigation tool. It indicates a selected item. Move

the selection box by pressing the UP, DOWN, LEFT, RIGHT navigation buttons. When

an item is selected, press the SELECT navigation button to act upon the selected item.

The next page shows various examples of selected items .

I. II.

Control panel

Menu navigation

The right navigation arrow on the main screen indicates a menu. Press the RIGHT

navigation button to enter that menu. A selection box indicates that a menu item is

selected. When a menu item is selected, its name appears at the top of the screen .

In this example the Settings menu is selected. Press the SELECT navigation button to

enter the settings window .

Navigation arrows

Navigation arrows indicate more menu items. Each navigation arrow

corresponds to a navigation button (view page 8). For example, the right navigation

arrow corresponds to the RIGHT navigation button. The left navigation arrow

corresponds to the LEFT navigation button, etc.

Back button

Use the Back button to navigate back in the menus. Use the navigation buttons to

select the Back button. The selection box indicates that the Back button is selected.

Press the SELECT navigation button.

On/Oﬀ switches

In this example the Reminders setting has an On/O switch . When the Reminders

setting line is selected, press the SELECT navigation button to turn the switch On/O .

In this example the switch is On .

Select, Save, Cancel

Select one of these columns with the RIGHT and LEFT navigation buttons. Change

the selected setting with the UP and DOWN navigation buttons. After you change the

settings, choose the Save button and press the SELECT navigation button. After you

press SELECT, the change is complete. If you decide to cancel your new settings, select

the Cancel button and press the SELECT navigation button.

III. IV.

Control panel

Navigate the Main menu

1 Start from the main screen , and press the RIGHT navigation button to enter

the Main menu. If the selection box is on the Message icon, you need to press

the RIGHT navigation button twice to enter the Main menu.

2 Spa is the  rst item in the Main menu . Continue pressing the RIGHT navigation

button to view all items in the main menu.

3 If you want to navigate back to the main screen, press the UP navigation button

to select the Back button . Once the back button is selected, press the SELECT

navigation button and the main screen will appear.

Navigate the Settings menu

1 Start from the main screen , and press the RIGHT navigation button to enter

the Main menu.

2 Spa is the  rst item in the Main menu . Continue pressing the RIGHT navigation

button until the Settings menu is selected .

3 Press the SELECT navigation button to enter the Settings menu .

4 The navigation arrow indicates more Settings. Press the DOWN navigation

button to scroll down the list.

I. II.

IV.III.

Indice

Altri manuali HANSCRAFT Vasca idromassaggio

HANSCRAFT

HANSCRAFT SPATOUCH 3 Manuale utente

HANSCRAFT

HANSCRAFT HOT TUB WAVE Manuale utente

HANSCRAFT

HANSCRAFT SPATOUCH 2 Manuale utente

HANSCRAFT

HANSCRAFT TP 800 Manuale utente

HANSCRAFT

HANSCRAFT TP 500 Manuale utente

HANSCRAFT

HANSCRAFT PLUG & PLAY Manuale utente

HANSCRAFT

HANSCRAFT IN.K300 Manuale utente

Manuali Vasca idromassaggio popolari di altre marche

Bestway

Bestway Lay-Z-Spa 54189 Manuale utente

Jacuzzi

Jacuzzi ARGA ARG101C0110 Manuale elenco delle parti

Morphy Richards

Morphy Richards Essentials PC4006 Manuale utente

Softub

Softub PRESTIGE Manuale utente

JNJ SPAS

JNJ SPAS SPA-318 Manuale di installazione

KIRAMI

KIRAMI Comfort Family Manuale utente

QCA Spa

QCA Spa VS501 PAK (VL260 TOPSIDE) Manuale utente

HoMedics

HoMedics FB-655HJ-GB Manuale utente

Everyday Hot Tubs

Everyday Hot Tubs 530 Manuale utente

anko

anko SS-601A Manuale utente

Jacuzzi

Jacuzzi Duetta 6042 Manuale utente

Pooli

Pooli OS030979B Manuale utente

Jacuzzi

Jacuzzi alimia Manuale utente

ab Solares Smart Spa Manuale utente

CalderaSpas

CalderaSpas CalderaSpas Utopia Series Manuale utente

Outsunny

Outsunny 848-047V70 Manuale utente

Aquatic

Aquatic INFINITY 1 Manuale utente

Master Spas

Master Spas MP Force Manuale utente