8
Using The Heating System
1. To turn on the heating system, push the red button on the right
of the unit.
2. To change the temperature, press the SP(Set Point) button twice.
3. Using the “up” and “down” arrow buttons, change to the desired
temperature(ºF). Press the SP button to enter the value.
The X-60’s heating system is digitally controlled and, unlike similar devices on the market,
heated from the inside of the chamber. The digital controller allows the user to easily set the
tank’s temperature while displaying a digital readout of the current temperature. The heater
automatically turns off once it reaches the set point and turns back on when it goes below by a
few degrees. The maximum operating temperature is 180˚F (82˚C).
4. To exit the set point function and check the current temperature,
press the “SP” and “Down Arrow” button at the same time.
