Hatch Q70B Manuale utente

Hatch Group Inc

Instruction Manual

Autoclave/Pressure Steam Sterilizer

Q70B 23L

REV 2

Revision History

Revised

Chapter

Content

Revised

Date of

Revision

Revised By

Number of

Revision

Remarks

Please appoint specific person to operate and maintain the device. The person must be well

trained.

REV 2

Using Range of This Instruction ………………………………………………………………………………………

Information About This Autoclave ……………………………………………………………………………………

Explanation Of Symbols ………………………………………………………………………………………………

Safety Warning …………………………………………………………………………………………………………

1. Brief Introduction …………………………………………………………………………………………………

2. Using Range …………………………………………………………………………………………………………

3. Parameters and Sterilization Programs …………………………………………………………………………

4. Operation Panel ……………………………………………………………………………………………………

5. Installation …………………………………………………………………………………………………………

6. Operation ……………………………………………………………………………………………………………

7. Abnormal Situations ………………………………………………………………………………………………

8. Maintenance ………………………………………………………………………………………………………

9. Transportation And Storage ………………………………………………………………………………………

10. Warranty …………………………………………………………………………………………………………

11. Accessories ………………………………………………………………………………………………………

Appendixes ……………………………………………………………………………………………………………

Appendix 1: Structure Diagram ……………………………………………………………………………………

Appendix 2: Circuit Diagram …………………………………………………………………………………………

Appendix 3: EMC ……………………………………………………………………………………………………

REV 2

Using Range of This Instruction

This instruction is for models: Q70B

Please do not operate the device according to other instruction manuals.

Information About This Autoclave

Notice:

➢Please read the manual carefully before operating the autoclave.

➢Please operate the autoclave strictly according to this manual.

➢Please keep this manual for reference.

➢Please contact your local distributor or us if there’s any problem with the autoclave.

➢The person who operate and maintain the autoclave shall be specified and well trained.

Description:

Autoclave Class B

Model number:

SN:

REV 2

Explanation Of Symbols

Symbol for "Caution!"

Symbol for “PROTECTIVE CONDUCTOR TERMINAL”

Symbol for “HOT SURFACE, KEEP AWAY”

Symbol for “ENVIRONMENTAL PROTECTION –Electrical wastes should not be disposed together with

household wastes.If possible, please contact local distributor or government to recycle it."

Symbol for “MANUFACTURER”

Symbol for “COMPILES WITH MDD93/42/EEC REQUIREMENTS”

Symbol for “DATE OF PRODUCTION”

Symbol for “SERIAL NUMBER”

Symbol for “EUROPEAN REPRESENTATIVE”

Symbol for “THIS SIDE UP”

Symbol for “KEEP AWAY FROM RAIN”

Symbol for “DO NOT ROLL”

Symbol for “STACKING LIMITED 3”

Symbol for "Room Temperature: 5℃~40℃"

Symbol for "Relative humidity：≤80% "

Explanation of symbols on unit

REV 2

Safety Warning

Please read below carefully:

❖Please use 3-hole socket, and ensure the socket has been connected well with the ground. Do not put the autoclave on a

place that the power are difficult to be cut off.

❖Do not use power with different voltage with that stated in this manual.

❖Do not touch the plug or socket with wet hands.

❖Do not pull, change, over-bend or twist the wires, and do not put heavy things on the wires.

❖Do not put the autoclave on an unstable table.

❖Do not block the door of autoclave, and cover the ventilation holes and radiation holes.

❖Do not put anything on the top of autoclave.

❖If you find any abnormal smell or sound during operation, please cut off the power immediately and contact your local

distributor or us.

❖If you do not use the autoclave for a long time, please cut off the power and store the autoclave in a dry and cool place.

Electric shock, fire or equipment damage might happen if you ignor below warnings.

REV 2

1. Brief Introduction

This autoclave is automatic type steam sterilizer, which is very easy to operate. The parameters and conditions of the program

will be displayed automatically on the digital screen during the sterilization. If there’s problem, the autoclave will alarm

automatically. If there’s over-temperature or over-pressure, the autoclave will automatically cut off the power and ensure the

safety of operator. Inside the autoclave, there’s a waste water tank to collect waste water and vapor to ensure they will not

pollute the inner clean pipes.

2. Using Range

This autoclave can be used for medical purposes, e.g. In general medical practices, dentistry, facilities for personal hygiene

and beauty care and also veterinary practices. It is also used for materials and equipment which are likely to come into contact

with blood or body fluids, e.g. Implements used by beauty therapists, tattooists, body piercers and hairdressers.

Type Description of intended use

The sterilization of all wrapped or non-wrapped, solid, hollow load products type A and porous

products as represented by the test loads in standard: EN13060:2004+A2:2010

Type of this autoclave

Do not sterilize liquid!

REV 2

3. Parameters and Sterilization Programs

3.1 Parameters:

The working condition of the autoclave:

❖Environmental temperature: 5℃～40℃

❖Relative humidity: ≤80%

❖Atmospheric pressure: >70kPa;

❖Voltage: 110±11VAC/16A/60Hz, 2500VA

❖The highest working pressure: 0.21～0.23MPa

❖The highest working temperature: 134～137℃

❖Life span of the autoclave: 5 years

The requirements of transportation and storage:

❖Environmental temperature range: 5~40℃

❖Relative humidity: ≤80%

❖No corroding gases

Detailed sizes of the autoclave:

(see below pictures)

Net weight of autoclaves

Model

Net Weight

Q70B

53.5 KGS

REV 2

3.2 Sterilization Programs

The data have “*” can be adjusted

4. Operation Panel

4.1. LCD screen

4.1.1 ■P/ON：Indicate the status of printer

The relative set-up menu for printer:

❖ADV PRINTER:ON/OFF

✓ON : the printer will work

✓OFF: the printer will not work.

Process

Vacuum times

Sterilizing time

Sterilization

temperature

Sterilization

pressure

Vacuum persist

time

Dry time

121℃/SOLID

1 *

20min *

121℃

110kPa

3 *

121℃/POROUS

3 *

20min *

121℃

110kPa

7 *

121℃/HOLLOW

3 *

20min *

121℃

110kPa

10 *

134℃/SOLID

1 *

4min *

134℃

210kPa

3 *

134℃/PROOUS

3 *

4min *

134℃

210kPa

7 *

134℃/HOLLOW

3 *

4min *

134℃

210kPa

10 *

USER DEFINED

3 *

5min *

134℃*

210kPa

10 *

B-D TEST

4min

134℃

210kPa

VACUUM TEST

-80kPa

15min

CLEAN PROCESS

5min

105℃

20kPa

PRIONEN

19min

135℃

210kPa

Button

LCD screen

Sterilization

Program

Button

B&D Test: The display shows 4min，but normally it takes 3.5min.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali hatch Attrezzature da laboratorio

hatch

hatch Ready Care LFSS12AA Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente

hatch Q70B Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche