ultimate
2. Safety instructions
Very hot steam emerges from the mist outlet. Caution: Danger of burns !
During the fogging process, very hot fluid droplets may occasionally escape
from the fog outlet. Therefore, no persons or heat-sensitive objects may be
located within 1.5 m of the fog outlet.
Never handle the mist outlet during operation or when activated.
The appliance must be installed in a location that is not heat-sensitive. Keep
a minimum distance of 60 cm to flammable, combustible and heat-sensitive
objects.
The fog fluid used contains a glycol which burns with a slightly bluish,
almost invisible flame. Therefore, never fog into strong ignition sources
such as open fire.
Never open the appliance connected to a power source.
During operation, isolated hot fluid droplets may escape. Care should
therefore be taken to ensure that these cannot become a danger to people.
Maintain a safety distance of 3m from the mist outlet nozzle.
Do not ingest the fog fluid and keep it away from children. In case of eye
contact, rinse with plenty of water. If inadvertently taken, consult a doctor.
Spilled or splashed fluid can cause slipping. Pick up fluid and dispose of it
according to regulations.
Do not allow visibility to fall below 2m, you are responsible for people
moving around in the fogged room.
The mist produced can trigger smoke detectors.
The method used here to produce artificial fog is largely harmless and is used
worldwide in the entertainment sector. We are not aware of any case in which a
healthy person would have been harmed by using this artificial fog. Nevertheless,
we recommend that sick persons or persons with previous respiratory tract
damage or allergies avoid contact with artificial fog!
4
