HCP QR201 Manuale utente

QR201

2D barcode scanner

User manual

Dear customer, thank you for buying one of the product of HCP company.

Before first use, read this notice carefully and if you have any doubts, please contact our authorized

service.

Sincerely,

HCP d.o.o.

2 od 10

About device

QR201 is a 2D barcode scanner with barcode module of reputable, worldwide known manufacturer

Opticon. It supports standard 1D and 2D barcodes.

1. Package contents

QR201 barcode scanner (USB version QR201U)

USB cable (USB type A - RJ45)

User manual

CD with drivers

2. Technical characteristics

3. Supported 1D and 2D barcode types

1D:

JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39, Code 93, Code 128, GS1-128 (EAN-128),

GS1 DataBar (RSS), IATA, Industrial 2of5, Interleaved 2of5, ISBN, ISMN, ISSN, Matrix 2of5, MSI/Plessey,

S-code, Telepen, Tri-Optic, UK/Plessey.

Postal Code:

Chinese post, intelligent Mail Barcode, Korean postal authority code, POSTNET.

2D:

Aztec code, Aztec Runes, Chinese Sensible code, Codablock F, Composite codes, Data Matrix

(ECC200/EC0-140), Maxi Code (mode 2~5), MicroPDF417, Micro QR code, PDF417, QR code.

Communication interface

USB (COM & HID)

Scan speed

60 fps

Light source type

Green LED + Red LED

Scan mode

CMOS sensor 752x480

Reading resolution

0.127mm

Scan angle

-45°up to 0, 0 up to +45°

Power supply

Working current

max 300mA

Working temperature

-20°up to 60°

3 od 10

4. Review device

5. Connect the communication cable

4 od 10

6. PC connectivity

7. Tips for scanning barcode

It is recommended that the barcode symbols scanned under angle less than or greather than 90˚. Also,

avoing scanning too close.

5 od 10

8. Adjust the barcode scanner

NOTE

For advanced settings QR201 used applications “UniversalMenuTool2D”.

QR201 can connect to PC as a HID device (as a standard PC keyboard without installing drivers)

or as open COM port on the computer for which it is necessary to install the appropriate drivers.

Drivers are on CD that goes with the device or you can downloaded it from website www.hcp.rs or

from forum www.hcp.rs/forum.

If you want to QR201 connect to the computer on open COM port, you need to scann 2D barcode

bellow which writes “USB-COM“ (it is necessary install drivers from CD) and if you want to QR201

connect as a HID device, you need to scann 2D barcode bellow which writes “USB-HID“.

6 od 10

Adjustment procedure barcode scanner:

1. scan the barcode symbol “SET”

2. scan the desired setting

3. scan the barcode symbol “END”

8.1. Automatic scanning

QR201 has the ability to work in automatic mode when we put barcode scanning product, barcode

scan automatically scans without pressing buttons.

Activating this mode is done by scanning the barcode in the table below.

The order of scanning for turn on automatic mode is:

1. scan the barcode“SET“

2. scan the barcode“Turn on automatic scan“

3. scan the barcode“END“

The order of scanning for turn off automatic mode is:

1. scann the barcode “SET“

2. scan the barcode “Turn off automatic scan“

3. scan the barcode “END“

SET

Turn on

automatic

scan

Turn off

automatic

scan

END

7 od 10

8.1 Setting piezo speaker

SET

Turn off

Turn on

Volume: quiet

Volume:

medium

Volume: high

Volume: loud

END

8 od 10

8.2 Adjusting the light indication

SET

Turn off

Turn on

Duration:

0,2s

END

9 od 10

10. Pin layout

USB type A –RJ45

RJ45 on QR201U

GND

USB_D+

USB_D-

Vcc_USB

USB type A

Vcc_USB

USB_D-

USB_D+

GND

10 od 10

NOTE:

Only use the cables that come with the device QR201!

NOTE:

In case of any failure you should contact the nearest authorized service center. HCP d.o.o is not

responsible for any damage caused by improper use of the device, (physical damage of the monitor housing)

using spare parts that are not original or interventions by unauthorized persons. It is forbidden and dangerous

to inject any kind of things and liquid into the device.

HCP d.o.o reserves the right to make changes in specifications and other information contained

in this document without notice, and users should be consulted in all cases HCP to determine whether

any such changes made. HCP shall not be liable for technical or editorial errors or omissions contained

in this document: nor for incidental or consequential damages incurred when using this guide. This

of this document may be photocopied, reproduced or translated into another language without the

prior written consent of HCP.

For more information about products visit website www.hcp.rs

Additional documentation about the devices can be found on our forum www.hcp.rs/forum

For technical assistance, contact us at [email protected]s

Indice

Altri manuali HCP Lettore di codici a barre

HCP

HCP LBR100 Manuale operativo

HCP

HCP LBR100 Manuale operativo

Manuali Lettore di codici a barre popolari di altre marche

POSMicro

POSMicro Datalogic PowerScan D7100 Manuale utente

Marson

Marson MT780 Guida rapida alla configurazione

NCR

NCR RealPOS Manuale utente

Motorola

Motorola SE3300 Guida rapida alla configurazione

Element

Element P130BT Manuale utente

Motorola

Motorola Symbol LS3008 Manuale di installazione e funzionamento

Meec tools

Meec tools OBD-II / VAG Manuale utente

SICK

SICK CLP 100 Manuale utente

Royal Tag SA

Royal Tag SA I-Read Manuale utente

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuale utente

Meteor

Meteor 8310 Manuale utente

Denso

Denso BHT-500B Manuale utente

Datalogic

Datalogic Heron HD3130 Manuale utente

Motorola

Motorola MP6000 Istruzioni di montaggio

Newland

Newland NLS-HR15-BT Manuale utente

ARTDEV

ARTDEV AS-1310 Manuale utente

Aopos

Aopos AS290 Manuale utente

ENS

ENS 367-5455 Manuale utente