HEAD HD3000CI Plus Manuale utente
USERᴗ
S MANUAL
hdSPPPci
p
Digital Satellite Receiver
Safety
1. Main supply : 90 - 240V AC 50/60 Hz
2. Please the receiver in a well-ventilated environment.
3. Directly on top of or under any another equipment.
4. Do not connect or modify cable when the STB is plugged in.
5. Service should be carried out only at a authorized service center, contact
Your local dealer for more information.
6. Clean only with a damp cloth
7. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
8. Use only the attachments/accessories specified by the manufacture.
9. Use only with a cart, stand, tripod, backer, or table specified by the manufacturer,
or sold with the apparatus combination to avoid injury form tip-cover.
10. To rain or intense moisture.
11. To any magnetic objects, such as loudspeakers, transformers, etc..
12. Do not use a damaged power cord, It may cause a fire or an electrical shock.
Safety
2
1. Safety
2. Controls and Functions
2.1 Front Panel
2.2 Real Panel
2.3 Remote Control Unit
3. STB Connction
4. Setting and Operations
4.1 Installation
4.2 Basic Settings
4.3 Edit
4.4 Setup
4.5 Miscellany
4.6 Hot Keys
4.7 Teletext
4.8 Sleep
4.9 History
4.10 Common Interface
Additional Information
Trouble Shooting
Technical Specfications
2
4
4
5
6
8
9
9
11
15
16
19
21
22
22
23
23
24
24
25
Contents
3
4
2. Controls and Functions
2.1 Front Panel
1. Power Button
Turn the receiver On/Off.
2. Display (4-digit/7-Segment)
The 4-digit displays channel information. In STANDBY mode, the 7-segment displays local time.
3. Remote Sensor
Detects infrared signal from Remote Control Unit.
4. Up/Down Button
Changes channels in the No-menu State and moves the cursor up/down in the Menu state.
5
2.2 Rear Panel
1. LNB IN (13/18V 500mA MAX)
connect the coaxial cable from LNB.
2. LNB OUT
connect to other STB.
3. SCART TV, VCR
connect the TV/VCR of TV/VCR to TV/VCR with a SCART cables.
4. AUDIO
This audio sockets provide stereo audio output.
5. VIDEO (Video Output)
This video jack provides a composite video output.
6. S/PDIF
S/PDIF connects digital audio terminal for digital audio output.
7. RS-232C
Connect a PC. RS-232C transfers data to the external computer (Baud rate 115200)
8. POWER
100~240V AC(Auto-selectable), 50~60Hz+/-5%
Make sure to check the power specification.
9. ANT IN
Connects the TV antenna.
10. TV OUT
Connects the TV output.
6
2.3 Remote Control Unit
1. STAND BY
Turns the receiver On/Off.
2. MUTE
Mutes audio output.
3. LEFT/RIGHT (ᵾᵾ/ᶀᶀ)
ῡIf you press Left/Right button while watching
channel, you can adjust Volume level.
ῢIf you press Left/Right button on the menu
status you can move to left/Right side.
4. UP/DOWN (ᵋᵋOOᵍᵍII
Changes channels in the No-menu state and
moves up/down in the menu state.
5. OK
Confirms the choice with the highlighed menu item.
When you press the OK button watching TV or
listening to Radio, the channel list will appear.
If you press the EXIT button on the final menu state,
you can move to the previous menu.
6. MENU
Shows the Main menu in No-menu and the
TV-Radio program screen in the Menu state.
7. EXIT
Exits from present menu and moves to the previous menu.
8. NUMERIC KEYS (0-9)
Control the numerical operation and especially change channels directly.
9. EPG
Display the TV/Radio Program Guide.
10. FAV
Make favorite by statellite, TV, Radio and by your Choice.
7
14. INFO
Shows the information of current program. If you press the INFO button, the channel
info box will be shown continuously even though the present time for channel info box
elapsed. If you press the INFO or EXIT button again, the channel info box will be disappeared.
15. TV/SAT
Select TV Mode and set-Top Box mode.
16. UHF
Sets UHF Menu.
17. AUDIO
Select Audio Mode as Stereo, Left or Right and Audio Language.
18. PAUSE
To pause the Video Screen.
20. TEXT
Pressing the TEXT button will open a Teletext page.
21. SUBT
Displays “Sub-title”
22. GAME
Use game
23. History
Previous channel selects.
8
STB Connections
Connect your Digital Stallite Receiver as shower below, according to your peripheral
equipment.
You can connect several devices like VCR, DVD Player and Analog Statellite Recevier the
VCR SCATR of the unit. In standby mode your recevier switches VCR input TV SCART output.
9
4. Setting and Operations
4.1 Installation (First time Installation)
ᵉTurn on your TV and receiver.
ᵉIf it is the first time using a receiver, you should set parameters for system configuration.
Press the MENU button. Refer to the following section for detailed information about
System configuration.
1. Language setting
Choose your preferable language.
10
3. Edit Statellite
Choose your preferable satellite by OK button. If you don’t choose satellite, press OK button again.
If you want to do the next performance, press EXIT button.
4. Antenna Setting
While cursor key is on satellite, if you press OK button and right key, you can select satellite.
While cursor key is on LNB Type, if you press OK button, it will show LNB frequency.
While cursor key is on motor setting, if you select “enable” and press OK button, it will show
how to set up DisEqc 1.2.
5. Automatic Search
After antenna setting, Automatic Search can be used
for easier search.
Press ok button, it will show satellite list. You can select
satellite by RED button.
ῡPress “BACK” button
ῢSearch start
Indice
Lingue:
