Headsight HORIZON Manuale utente

HORIZONHORIZON®®
INSTALLATION & OPERATION MANUAL
HEADSIGHT.COM |574.546.5022
HEADER APPHEADER APP
CAPELLOCAPELLO
09062314a


Copyright Headsight, Inc. 2020
About Headsight
Headsight Contact Info
Headsight, Inc.
4845 3B Road
Bremen, IN 46506
Phone: 574-546-5022
Fax: 574-546-5760
Email: info@headsight.com
Web: www.headsight.com
Technical Assistance
Phone: 574-220-5511
About this Manual
How to use this manual
The instructions in this manual are in the order that they should be completed for new installations.
Complete all applicable instructions in each section before proceeding. Note that some sections
are labeled to indicate they only apply to certain machines or applications. An index is available
in the front of the manual to help find technical information for previously installed systems.
This icon designates information
of which you should take note.
This icon indicates a special tool
needed for a given task.
This icon designates an
important instruction.
Suggestions
If you have any suggestions to improve this manual please call 574-546-5022 or email info@headsight.com.
Disclaimers
HEADSIGHT, HORIZON, PINPOINT, FORESIGHT, FEATHERSIGHT, TRUESENSE, TERRAHAWK,
INSIGHT, the Headsight logo, the Horizon logo, and Terrahawk logo are trademarks of
Headsight, Inc. All other trademarks are property of their respective owners.
Protected by one or more of the following patents and published applications:
US6883299; US7310931; US7647753; US9609806; US9609806; US10222410;
US10244680; EP2955993(DE,ES,FR,IT,UK); EP2956851 AU2004203614;
BR112015019262; BR112015019286; CA2900987; CA2900994; WO20180152266

Table of Contents
Installation�������������������������������������������������������������������������������� 01
Before You Start �������������������������������������������������������������������������������� 01
Horizon Base ������������������������������������������������������������������������������������02
AllModels������������������������������������������������������������������������������� 02
Header "AUX" Harness ��������������������������������������������������������������������������02
Shaft Speed �������������������������������������������������������������������������������������02
Deck Plate Sensor �������������������������������������������������������������������������������03
Folding Heads ����������������������������������������������������������������������������������04
Settings ����������������������������������������������������������������������������������� 05
Horizon Setup ����������������������������������������������������������������������������������05
Setup Screen ������������������������������������������������������������������������������������05
Setshaftspeedalarms��������������������������������������������������������������������� 05
Showshaftspeedalarm�������������������������������������������������������������������� 05
Showdeckplateposition������������������������������������������������������������������� 05
Showmaintenancereminder��������������������������������������������������������������� 05
Operation���������������������������������������������������������������������������������� 06
Home Screen ������������������������������������������������������������������������������������06
DeckPlatePosition ����������������������������������������������������������������������� 06
ShaftSpeed������������������������������������������������������������������������������ 06
DeckplateAngle�������������������������������������������������������������������������� 06
FoldButton(Foldingheadsonly) ����������������������������������������������������������� 06
Advanced Info����������������������������������������������������������������������������� 07
Diagnostic Screen �������������������������������������������������������������������������������07
DetailedSignalVoltages������������������������������������������������������������������� 07
Lube Screen �������������������������������������������������������������������������������������07
ServiceReminder/Lube ������������������������������������������������������������������� 07
Diagnostics�������������������������������������������������������������������������������� 08
Statement of Limited Warranty �����������������������������������������������������������������09
iv

Installation
Before working on combine or under header always:
1. Perform all combine and header manufacturer
safety precautions for servicing header.
2. Insert stop to prevent movement of header.
3. Set combine parking brake.
4. Turn off combine and remove key from ignition.
5. Disconnect all drive shafts from the header.
Before You Start
Because of the complexity of the entire system, several different Installation
manuals may be provided for a complete installation. Kits may include:
• Header Sensor Manual
• Shows the installation of AHHC sensors for that specific header
• Includes sensor installation and sensor wire routing
• Horizon Manual
• Main manual showing installation and operation of the overall Horizon system
• Includes installation of controllers and wiring for various options
• Header App Manual
• Header specific manual for the “Application” of auxiliary sensing controls on various heads.
• Includes Installation and operation instructions for the header App.
1. Complete the sensor and wiring installation first.
2. Use this App manual along with the header installation portion of
the Horizon manual to complete the installation.
01
Installation

Horizon Base
All Models
1. For Deck Plate angle to read correctly, Horizon must
be mounted on back sheet of header as shown.
Header "AUX" Harness
1. Use HT9474
1. Connect Y904 to Y903 of Horizon main header harness.
Shaft Speed
1. Mount sensor bracket inline with center of hex shaft
using existing bolt (mount on gusset near Horizon box.)
2. Attach sensor to mount bracket and set 1/8inch
minimum clearance distance between the sensor
tip and the hex shaft at its high point.
3. Route speed sensor wire back toward Horizon
box following existing hoses and wiring.
4. Connect Y193 of adapter harness to speed sensor.
A
B
02
Installation

Deck Plate Sensor
1. Bolt sensor body to header gusset one row
left of center using
5
/
16
x ¾ bolts.
2. Remove bolt “A” from deck plate adjustment arm.
3. Discard washer and replace with bracket “B”.
• Replace bolt “A” being careful to align it in its original
place so end of bolt is in same detent on cross rod
4. Connect 10ft extension wire to pigtail on sensor.
5. Route the wire toward back of header being
careful to zip tie it away from main shaft.
6. Route wire along the hydraulic lines under header to
left of feederhouse and then up back of the header.
7. Connect wire to connector Y211 on adapter harness.
A
B
03
Installation

Folding Heads
For Capello Folding headers, connect Y147B to Y148 on main Horizon harness.
1. Use HT9274 - DIN solenoid adapter.
2. Remove cap from Y540 on Aux tail
3. Remove Deutsch pin lock from inside of cap, and
remove white sealing plugs from backside of cap.
4. Insert Orange wire into pin 1and Black wire into pin 2.
5. Reinstall Deutsch pin lock inside of connector.
6. Connect solenoid adapter to Y540 of adapter harness.
7. Remove factory connector from fold valve solenoid
and install Y49 to fold valve solenoid.
04
Installation

Settings
Most Screens include Help pages that can be accessed by pressing the ? button. These
pages contain further information about the items displayed on the current screen.
Horizon Setup
1. When entering your combine and Header information
in the Initial setup of Horizon, choose:
• Header Select = Corn
• Header App = Capello
Setup Screen
Set shaft speed alarms
• Low speed - set minimum allowed speed
• High speed - set maximum allowed speed
• “Show Shaft Speed Alarm” must be
checked to enable alarms
Show shaft speed alarm
• If box is checked you will be warned for speeds
that go outside of ranges entered
Show deck plate position
• If box is checked a notification window will appear when deck plates are adjusted
Show maintenance reminder
• If box is checked a notification window will appear when maintenance intervals are reached
05
Settings

Operation
Home Screen
Deck Plate Position
• DIsplays deck plate gap
Shaft Speed
• Displays header gearbox drive shaft speed
Deckplate Angle
• When the Horizon Base is mounted correctly on
the backsheet of the header, this value shows
the current deckplate angle of the header.
• Value is green if within OEM recommended range
Fold Button (Folding heads only)
• Button appears only when Horizon senses fold valve attached
• Button toggles between deck plate and fold mode
• Enable (green indictor) to allow head to be folded with Reel f/a controls on combine
• Disable to operate deckplates
• System defaults to Deckplate mode. Fold function times out.
06
Operation
Indice
Altri manuali Headsight Controllori


















