Heat Controller B-VFH 9/12/18/24/DA Manuale del proprietario
Heat Controller • 1900 Wellworth Ave. • Jackson, MI 49203 • (517)787-2100 • www.heatcontroller.com
INSTALLATION, OPERATION
& MAINTENANCE MANUAL
InverterFlex Series®
Wireless Remote Control for
B-VFH 12/18/24CA
B-VFH 9/12/18/24/DA
B-VFH 9/12/18/24/UA
Wired Remote Control for
B-VFH 12/18/24CA
B-VFH 9/12/18/24/DA
B-VFH 9/12/18/24/UA
B-VFH-1 Multi-Zone Wireless / Wired Remote Control Heat Controller
Contents
I. Wired Remote Controller............................................................................1
1 Symbols on LCD ...................................................................................1
1.1 Outside View of the Wired Remote Controller .............................1
1.2 LCD of the Wired Remote Controller ...........................................1
2 Buttons ..................................................................................................2
2.1 Buttons on the Wired Remote Controller......................................2
2.2 Function of the Buttons ...............................................................3
3 Operation Instructions ...........................................................................4
3.1 On/Off ..........................................................................................4
3.2 Mode Setting ................................................................................4
3.3 Temperature Setting .....................................................................4
3.4 Fan Setting ..................................................................................5
3.5 Timer Setting ...............................................................................5
3.6 Swing Setting ...............................................................................7
3.7 Sleep Setting ................................................................................8
3.8 Turbo Setting ................................................................................9
3.9 E-heater Setting .........................................................................10
3.10 Blow Setting .............................................................................11
3.11 Other Functions .......................................................................12
4 Installation and Dismantlement ..........................................................13
4.1 Connection of the Signal Line of the Wired Remote Controller ......13
4.2 Installation of the Wired Remote Controller................................13
4.3 Dismantlement of the Wired Remote Controller........................15
II. Wireless Remote Controller.....................................................................16
1 Function of Press Buttons ...................................................................16
2 Guide for General Operation ...............................................................19
3 Guide for Optional Operation ..............................................................19
User Notice
nNever install the wired remote controller in moist circumstances or expose it directly to sunlight.
nNever beat, throw, or frequently disassemble the wired remote controller or the wireless remote controller.
nNever operate the wired remote controller or the wireless remote controller with wet hands.
Please read the manual carefully before using and installing this product.
Heat Controller B-VFH-1 Multi-Zone Wireless / Wired Remote Control
1
I. Wired Remote Controller
1 Symbols on LCD
1.1 Outside View of the Wired Remote Controller
1.2 LCD of the Wired Remote Controller
Fig. 2 LCD of the Wired Remote Controller
Fig. 1 Outside View of the Wired Remote Controller
B-VFH-1 Multi-Zone Wireless / Wired Remote Control Heat Controller
2
Table 1
DescriptionSymbols
Swing function.
Running modes of the indoor unit (Cooling, Dry, Fan and Heating).
Sleep function (Only sleep 1).
Defrosting function for the outdoor unit.
Gate-control function (this function is yet unavailable for this unit).
High, middle, low or auto fan speed of the indoor unit.
Lock function.
Memory function (The indoor unit resumes the original setting
state after power failure and then power recovery).
Turbo function.
Shield functions (buttons, temperature, On/Off or Mode is
shielded by the remote monitor.
It blinks under on state of the unit without operation of any button.
Master wired remote controller (this function is yet unavailable
for this unit).
Ambient/preset temperature value.
Electric auxiliary heating function.
Blow function.
Timing value.
Energy-saving function (this function is yet unavailable for this
unit).
Quiet function (two types: quiet and auto quiet)
(this function is yet unavailable for this unit).
It will be displayed under the debugging mode.
2 Buttons
2.1 Buttons on the Wired Remote Controller
Fig. 3 Buttons on the Wired Remote Controller
SET
No.
Heat Controller B-VFH-1 Multi-Zone Wireless / Wired Remote Control
3
No. Name Function
1 Enter/Cancel Function selection and cancellation.
2▲jRunning temperature setting of the indoor unit, range: 60°F - 86°F (16°C - 30°C).
kTimer setting, range:0.5-24 hr.
6▼
3 Fan Setting of the high/middle/low/auto fan speed.
4 Mode Setting of the Cooling/Heating/Fan/Dry/Auto mode of the indoor unit.
5 Function Switchover among the functions of Turbo/Save/E-heater/Blow etc.
7 Timer Timer setting.
8 On/Off Turn on/off the indoor unit.
4+2 ▲+Mode
Press for 5s under off state of the unit to Enter/Cancel the Memory function (If memory is set, indoor
unit after power failure and then power recovery will resume the original setting state. If not, the
indoor unit is defaulted to be off after power recovery. Memory off is default).
3+6
Fan+▼ By pressing them at the same time under off state of the unit, will be displayed on the wired
remote controller for the cooling only unit, while will be displayed on the wired remote controller
for the cooling and heating unit.
Upon startup of the unit without malfunction or under off state of the unit,press them at the same
time for 5s to enter the lock state, in which case, any other buttons won’t respond the press. Repress
them for 5s to quit this state.
4+6 ▲+▼
4+6 Mode+▼
Under OFF state, the Celsius and Fahrenheit scales can be switched by
pressing “Mode” and “▼” for ve seconds.
Under OFF state, it is available to go to the commissioning status by pressing “Function” and “Timer”
for ve seconds, and let “00” displayed on the temperature display area by pressing “Mode”, then
adjust the options which are shown on the timer area by pressing “▲” and “▼”. There are four
options, as follows:
jIndoor ambient temperature is sensed by the return air temperature
sensor ( 01 displayed on the timer area).
kIndoor ambient temperature is sensed by the wired controller (02 displayed on the timer area).
lThe return air temperature sensor is selected under the cooling, dry, or fan mode; while the wired
controller temperature sensor is selected under the heating or auto mode. (03 is displayed on the
timer area).
mThe wired controller temperature sensor is selected under the cooling, dry, or fan mode; while
the return air temperature sensor is selected under the heating mode. (04 is displayed on the timer
display area).
5+7 Function+Timer
5+7 Function+Timer
Under OFF mode, go to the commissioning status by pressing “Function” and “Timer” for ve
seconds. Press “Mode” button to until “01” icon is shown at the temperature display area. The setting
status will be shown at timer area. Press “▲” and “▼” button to adjust and two options are available:
jThree low levels (01) ; kThree high levels (02).
Table 2
B-VFH-1 Multi-Zone Wireless / Wired Remote Control Heat Controller
4
Auto Fan HeatingDryCooling
3.3 Temperature Setting
Press ▲or ▼ to increase/decrease the preset temperature. When pressing either of them
continuously, the temperature will be increased or decreased by 1 every 0.5s,as shown in Fig.
6. In the Cooling, Dry, Fan or Heating mode, the temperature setting range is 60°F~86°F.
In the Auto mode, the temperature setting is unadjustable.
3.2 Mode Setting
Under the “On” state of the unit, press Mode to switch the operation modes as the following
sequence: Auto-Cooling-Dry-Fan-Heating.
3 Operation Instructions
3.1 On/Off
Press On/Off to turn unit on. Pressing once more will turn unit off.
Note: The state shown in Fig. 4 indicates the “Off” state of the unit after power on. The state
shown in Fig. 5 indicates the “On” state of the unit after power on.
Fig. 4 “Off” State Fig. 5 “On” State
Heat Controller B-VFH-1 Multi-Zone Wireless / Wired Remote Control
5
3.4 Fan Setting
Under the “On”/”Off” state of the unit, press Fan and then fan speed. The indoor unit will
change circularly as shown in Fig. 7.
Fig. 6
Fig. 7
3.5 Timer Setting
Under the “On”/”Off” state of the unit, press Timer to set timer off/on.
Timer on setting: press Timer. LCD will display “xx.x hour”, with “hour” blinking. Press ▲or ▼ to
adjust the timing value. Press Enter/Cancel to conrm the setting.
Timer off setting: press Timer, if LCD won’t display xx.x hour, it means the timer setting is
canceled.
Timer off setting under the “On” state of the unit is shown as Fig. 8.
Auto Low Middle High
B-VFH-1 Multi-Zone Wireless / Wired Remote Control Heat Controller
6
Fig. 8 Timer off Setting under the “On” State of the Unit
Timer range: 0.5-24hr. Every press of ▲or ▼ will make the set time increased or decreased
by 0.5hr. If either of them is pressed continuously, the set time will increase/ decrease by 0.5hr
every 0.5s.
Turn on the unit, without
setting timer
Press “Timer” button to set Press “Increase” or “Decrease
button to adjust time
Press “Timer” button to
cancel timer setting
Press “Enter/Cancel” to nish
timer setting
Heat Controller B-VFH-1 Multi-Zone Wireless / Wired Remote Control
3.6 Swing Setting
Swing On: Press Function under on state of the unit to activate the swing function. In
this case, will blink. After that, press Enter/Cancel to make a conrmation Swing Off:
When the Swing function is on, press Function to enter the Swing setting interface, with
blinking. After that, press Enter/Cancel to cancel this function. Swing setting is shown as Fig. 9.
Notes:
jSleep, Turbo or Blow setting is the same as the Swing setting.
kAfter adjusting the setting press the key “Enter/Cancel” to go back to the setting status or
quit automatically ve seconds late.
Turn on the unit, without
turning on swing function
Press “Function” button into
swing state
Press “Enter/Cancel” to conrm
Press “Enter/Cancel” to
cancel swing
Press “Function” button
into swing state
Fig. 9 Swing Setting
7
B-VFH-1 Multi-Zone Wireless / Wired Remote Control Heat Controller
8
3.7 Sleep Setting
Sleep on: With unit on press Function to illuminate Sleep setting interface. Press Enter/Cancel
to conrm the setting.
Sleep off: When the Sleep function is activated, press Function to enter the Sleep setting
interface. After that, press Enter/Cancel to disable this function.
In the Cooling or Dry mode, the temperature will increase by 2°F -(1°C) after the unit runs under
Sleep 1 for 1 hr and 2°F -(1°C) after another 1 hr. After that, the unit will run at this temperature.
In the Heating mode, the temperature will decrease by 2°F -(1°C) after the unit runs under
Sleep 1 for 1 hr and 2°F -(1°C) after another 1 hr. After that, the unit will run at this temperature.
Sleep setting is shown as Fig. 10.
Turn on the unit, without
turning on sleep
Press “Function” button into
sleep
Press “Enter/Cancel” to
cancel sleep
Press “Function” button into
sleep
Press “Enter/Cancel” button
to turn on sleep
Fig. 10 Sleep Setting
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Heat Controller Telecomando
Heat Controller
Heat Controller Room Air Remote Controller Guida all'installazione
Heat Controller
Heat Controller SMA Series Manuale utente
Heat Controller
Heat Controller SMA24SC Manuale utente
Heat Controller
Heat Controller Comfort-Aire PSH-141A Manuale utente
Heat Controller
Heat Controller Room Air Remote Controller Manuale utente
Heat Controller
Heat Controller RG32A/E Guida rapida
Heat Controller
Heat Controller B-SMA/SMH 09 Manuale utente
