Heath Zenith Notif Manuale utente
alert
wireless plug-in doorbell
with smartphone notifications
Owner’s Manual
2
Thank You for Purchasing Notifi™ Doorbell System
Welcome to Notifi by HeathZenith. This manual will help setup the Notifi system. Please read and understand this entire manual
before attempting to assemble, install, or operate the Notifi system. For additional support and videos, go to
www.heath-zenith.com/notifi.
IMPORTANT INFORMATION
• Minimum system requirement for the Notifi app is iOS 9.0 or higher and Android 5.0 or higher.
Notifi Alert Features
• Smart Phone Notifications
• Programmable Muting
Introduction
Table of Contents
INTRODUCTION .............................3
SETUP................................... 4-6
HOW TO USE ............................ 7-10
CARE AND CLEANING ......................10
FAQS .................................. 11-12
To maintain the compliance with the RF exposure guideline, place the base unit at least 7.875" (20 cm) from nearby persons.
CAUTION
3
Introduction
Specifications
Power Requirements:
Chime: 120 VAC, 60 Hz
Push Button: Type CR2032 3V battery (included)
Push Button Transmission Range: 100 feet
Volume: Adjustable
Number of Tunes: 11
Operating Temperature (Push Button): -13 to +120°F (-25°C to +50C)
Operating Temperature (Alert Chime):
Minimum System Requirements for the Notifi App: iOS 9.0 or higher and Android 5.0 or higher, Broadband Internet
Connection with Home Wi-Fi®: Download speed is 3 MB/s and upload speed is 1 MB/s
You Will Need (not included)
• Password for your home network
• Broadband Internet connection with home Wi-Fi router
• Phillips screwdriver
• Flat-head screwdriver
Carton Inventory
Notifi Alert Chime
Push Button
LED Indicator
Screws (#6 x 3/4") and Double-Sided Tape (for Push Button)
4
1
Setup
Remove the Notifi Alert Push Button Battery Tab
To prevent possible SERIOUS INJURY or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
1. Remove the backplate of the Notifi Alert push button by pushing in tab on the bottom with a small flathead screwdriver (not
included).
2. Remove the orange battery tab.
Install the Notifi Alert Chime
1. Plug in the chime at the desired location. NOTE: It is recommended that the chime be plugged into the bottom wall
receptacle with the chime hanging below the receptacle as shown.
2
5
Setup
Test the Notifi Alert Push Button and Chime
IMPORTANT: Do not permanently mount the push button until the push button and chime are working properly.
1. Temporarily position the push button where it will be mounted.
2. Press the push button to verify the chime and push button work correctly.
3. If the chime does not sound, move the chime closer to the push button and test again.
3
Install the Notifi Alert Push Button
1. Secure the push button backplate to the door jamb or wall with screws or double-sided tape.
2. Slide the top of the Notifi Alert push button cover down onto the backplate and press the bottom of the push button cover
against the backplate until it snaps onto the backplate.
4
DOUBLE-SIDED TAPE INSTALLSCREW INSTALL
Remove material in screw holes (if needed)
before mounting with screws.
Push Button
Cover
Push Button
Backplate
6
6
Setup
Download the Notifi App
iOS Devices
Go to the App StoreSM and search for the “Notifi Connected Products” app and download.
Android Devices
Go to the Google Play™ store and search for the “Notifi Connected Products” app and download.
Setup the Notifi App
IMPORTANT: Your home password will be required during this process.
1. On your mobile device, go to Settings > Wi-Fi. Select the “Notifi Alert XXXX” (“XXXX” represents the unique MAC address
of each Notifi Alert Chime) from the available Wi-Fi networks.
2. Once connected, open the Notifi app. The app will detect your new Notifi system.
3. Select “YES” to start the setup and the app will guide you through the remaining steps.
NOTE: Your username will be your email address. Your password must be a minimum of 8 characters or a maximum of 12
characters. Alpha numeric and/or special characters may be used.
IMPORTANT: The password must include at least 1 number, 1 upper case letter, 1 lower case letter, and 1 special character.
5!
7
How to Use
Systems Tab
The Systems tab is the “home screen” for all of your Notifi systems. From here you can access the following choices:
• Notifi systems – The Systems tab lists all Notifi systems available. Tap on the desired Notifi system to view all connected
accessories.
• mute unmute – Selecting the “Mute” button will immediately mute your chime. Muting the chime from this location will
override any scheduled mute settings. Select “Unmute” to return to the scheduled mute settings.
• – Selecting the “Gear” icon next to a Notifi system will allow you to adjust different settings for that Notifi system.
• Add Notifi System – At the bottom of the list of Notifi systems is this selection. Tap on “Add Notifi System” to learn how
to add additional systems to your Notifi app.
• Logout – You may choose to logout of the Notifi app if you want to log into another account. Also, once logged out, you will
be asked to log back in if you receive a notification from a Notifi system on this device.
• Need help? – Selecting this link will take you to the Notifi FAQ website where you will have access to additional help features
as well as contacting HeathZenith technical service department (1-800-858-8501).
• i– Tap on this icon to access additional information about the Notifi app.
Events
An event is created when the push button is pressed or an accessory is activated. To view an event, tap the Events tab.
Then tap the name of the Notifi system you would like to view events for. The events will be listed chronologically.
To delete an event, swipe left across the event you wish to delete. Then tap the trashcan icon .
Notifi Software Updates
Whenever a firmware update is available for a Notifi product, the “gear” icon next to the applicable product on the
“Systems” screen will change to a download icon . This icon will remain on the screen until the firmware update has
been completed. NOTE: A reminder pop-up screen will also appear each time you log into the Notifi app reminding you that a
firmware update is available. This pop-up screen will continue to appear until the firmware has been updated.
Alert LED Indicator
The Notifi Alert has a LED indicator on the face of the chime. This LED indicator offers additional information as to the status of
the Notifi Alert chime. See the FAQ section on page 12 for additional details.
Notification Settings
> Feature Settings > Notifications
The notifications settings screen allows you to enable, schedule, and disable push notifications and email notifications.
IMPORTANT: With any setting changes make sure you press the Save button
Push to Talk
Back Events
View Live Feed
Save in the upper right corner if you want to keep
your changes.
8
How to Use
Mute Settings
> Feature Settings > Mute Settings
The Notifi system allows you to mute your chime from within the Notifi app. The mute settings allow you to schedule times
during the day when the chime should be muted. NOTE: Muting the chime does not disable notifications.
Default (2 Hour): Mutes the chime for a period of two hours from the time this selection is made. This selection may be turned
OFF at any time.
Weekday: Allows for a specific time during the day to be selected to mute the chime. The scheduled time is applied to all
selected days. This selection may be turned OFF at any time.
Weekend: Allows for quick scheduling of weekend only times when the chime is to be muted. This selection may be turned OFF
at any time.
IMPORTANT: The chime can be muted quickly from the Systems selection tab by selecting “Mute” under the selected Notifi
system. Any scheduled mute settings will be overridden while the chime is muted from the Systems tab. Select “Unmute” to
return to the scheduled mute settings.
IMPORTANT: With any setting changes make sure you press the Save button
Push to Talk
Back Events
View Live Feed
Save in the upper right corner if you want to keep
your changes.
Volume Setting
> Feature Settings > Speaker Volume
The Notifi Alert’s speaker volume can be adjusted by using the slide control at the bottom of the app screen.
System Name/Photo Icon
> Advanced Settings > System Name/Photo
The Notifi systems on your account can be renamed at any time.
A photo can be added to represent each Notifi system on your mobile device. The photo will be placed next to the selected Notifi
system. NOTE: The photo is stored on the Notifi server and will appear on any device logged into or sharing this account.
IMPORTANT: With any setting changes make sure you press the Save button
Push to Talk
Back Events
View Live Feed
Save in the upper right corner if you want to keep
your changes.
Add a Notifi Accessory
> Advanced Settings > Add Notifi Accessory
Up to 10 wireless accessories (sold separately) may be linked to your Notifi Alert. Follow the instructions on the screen to
connect each new accessory.
9
Accessory Name/Photo Icon
Systems Tab > Notifi System > Accessory* > > Accessory Name/Photo
* Tap the arrow next to the Notifi system to show the Notifi accessories connected to that system.
The Notifi accessories on your account can be renamed at any time.
A photo can be added to represent each Notifi accessory on your mobile device. The photo will be placed next to the selected
Notifi accessory. NOTE: The photo is stored on the Notifi server and will appear on any device logged into or sharing this
account.
IMPORTANT: With any setting changes make sure you press the Save button
Push to Talk
Back Events
View Live Feed
Save in the upper right corner if you want to keep
your changes.
Accessory Sounds
Systems Tab > Notifi System > Accessory* > > Sounds
* Tap the arrow next to the Notifi system to show the Notifi accessories connected to that system.
The Notifi Alert chime has eleven tunes available for each accessory. A unique sound can be assigned to each accessory.
Auld Lang Syne Beethoven’s Fifth Birthday Celebration
Ding-Dong Ding Relax Triplet
Short Westminster Shorty We Wish You A Merry Christmas
Westminster Whittington
Change the Notifications Email
> Account Settings > Update Email
Use this to change the email address where notifications will be received. NOTE: Changing this email address will not change
the Username email address used to log into your Notifi account.
Change Account Password
> Account Settings > Update Password
Use this to change the password for your Notifi account.
Multiple Guest Users
> Advanced Settings > Manage Multiple Users
The Notifi system allows you to control multiple “guest” users within your account. These users will receive notifications when
the Notifi Alert is activated. The “guest” users will not be able to access any of the Notifi settings you have setup.
To add a “guest” user to your multiple user list, tap the “Add Viewers” button and type their email address in the “To:” field, then
tap the “Send” button. The “guest” user will receive an email inviting them to view your system. They will need to download the
Notifi app and create their own account before they are able to access your Notifi system.
You can turn off their access to your Notifi system at any time by tapping their username in the list. You can turn it back on by
tapping their username again.
How to Use
Guest users
CominG soon
10
How to Use
Care and Cleaning
Chime and Push Button
Use a dry cloth to clean the chime and push button. Do not use any fluids on the chime or push button.
Deleting a Notifi Accessory
Systems Tab > Notifi System > Accessory* > > Delete Accessory
* Tap the arrow next to the Notifi system to show the Notifi accessories connected to that system.
This selection will delete the currently selected Notifi accessory. To reconnect the accessory to a Notifi system, go to “Add a
Notifi Accessory”.
Deleting a Notifi System
Systems Tab > Notifi System
NOTE: When a Notifi device has been physically damaged and is no longer working, this process will remove the system from
the Notifi app.
• Slide the Notifi system name on the Systems Tab to the left.
• Tap the trashcan icon to delete the system.
NOTE: Deleting a Notifi system on the homepage does not reset the Notifi Alert to the factory settings. If you want to move the
chime to a different account, see Factory Reset below.
Factory Reset
> Advanced Settings > Factory Reset
Reset the Notifi Alert chime to the original factory settings if you want to move this Notifi Alert to a different account.
When resetting the Notifi Alert chime:
• The Notifi Alert chime will be reset to factory settings and will no longer be connected to your Wi-Fi or the Notifi app.
• All events will be deleted from your account.
• All settings will be deleted.
• The Notifi Alert chime will be removed from your Heath/Zenith account.
NOTICE
Indice
Altri manuali Heath Zenith Accessori
Heath Zenith
Heath Zenith Decorative Wireless Chime 598-1000-07 Manuale utente
Heath Zenith
Heath Zenith Wireless Push Button Accessory 598-1105-05 Manuale utente
Heath Zenith
Heath Zenith Replacement Motion Sensor SH-5407 Manuale utente
Heath Zenith
Heath Zenith 121AC Manuale utente
Heath Zenith
Heath Zenith Lighted Wireless Push Button Accessory Manuale utente
Heath Zenith
Heath Zenith Wireless Mechanical Battery Operated Chime... Manuale utente
Heath Zenith
Heath Zenith 7306 Manuale utente
Heath Zenith
Heath Zenith Notifi Elite Manuale utente
Heath Zenith
Heath Zenith SL-6200 Manuale utente
Heath Zenith
Heath Zenith 5316 Manuale utente
Heath Zenith
Heath Zenith Wireless Chime 598-1172-04 Manuale utente
Heath Zenith
Heath Zenith Decorative Wireless Chime 6180 Manuale utente
Heath Zenith
Heath Zenith 7309 Manuale utente
Heath Zenith
Heath Zenith InTune MP3 Door Chime Manuale utente
Heath Zenith
Heath Zenith Hardwired Mechanical Chime 598-1112-05 Manuale utente
Heath Zenith
Heath Zenith 595-5707-06 Manuale utente
Heath Zenith
Heath Zenith Hardwired Electronic Chime 598-1313-00 Manuale utente
Heath Zenith
Heath Zenith 121AC Manuale utente
Heath Zenith
Heath Zenith Wireless Dual Push Button Accessory SL-6200 Manuale utente
Heath Zenith
Heath Zenith Wireless Strobe Chime 6144 Manuale utente
