HeimVision HM243 Manuale utente

Network Video Recorder

System

HM243

User Manual • Uživatelský manuál •

Užívateľský manuál • Használati utasítás •

Benutzerhandbuch

Dear customer,

Thank you for purchasing our product. Please read the following instructions carefully

before first use and keep this user manual for future reference. Pay particular attention

to the safety instructions. If you have any questions or comments about the device,

please contact the customer line.

✉www.alza.co.uk/kontakt

✆+44 (0)203 514 4411

Importer

Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

SAFETY CAUTIONS

•Please keep the NVR away from liquid in case of short-circuit.

•Please use the product in an open space and do not block the air vents.

•For your safety, please use the original power supply provided.

•If the NVR starts or works abnormally, please unplug the power adapter and clean

the dust on the mainboard in the NVR device, then restart the NVR.

•Please obey the regulations and policies in your country and area when installing

the product.

ABBREVIATIONS OF TERMS

NVR: Network Video Recorder

HDD: Hard Disk Drive

SATA: Serial ATA, a common hardware interface employed by our NVR.

EseeCloud: A software designed for this product.

FAT32: A file system of your USB Drive.

PACKAGE LIST

NVR x1 IP Camera x4 5dB Antenna x4

(Hard Disk Drive (for IP Camera)

not included)

Ethernet Cable x1 DC 12V/2A DC 12V/1A

Power Adapter x1 Power Adapter x4

(for NVR) (for IP Camera)

USB Mouse x1 Screw x4 Screw package x4

(for HDD) (for IP cameras)

Quick Guide x1

PRODUCT OVERVIEW

Antenna

HD Output

Ethernet Port

USB Port

DC-In

LED

Installation Hole

Stand

Night Vision Sensor Antenna Ethernet Port DC-In

HARD DISK DRIVE INSTALLATION AND SYSTEM

CONNECTIONS

Hard Disk Drive Installation

Notice:

•To record video and play the recorded video, the installation of the Hard Disk Drive

is a must. Otherwise, you can only watch the live picture.

•A Hard Disk Drive is not included in this NVR System.

•This NVR system works with a 3.5” SATA HDD. The HDD should be formatted if it’s

installed.

Step 1:

Loosen the screws on the back of

the NVR and then remove the

cover.

Step 2:

Connect the power cables and

data cables to the corresponding

ports of your HDD.

Step 3:

Fasten the cover and HDD with

the four screws.

Step 4:

Fasten the cover on the back of

the NVR with the two screws.

System Connections

Do not fix the IP Camera with the screws before you can see the image on the

screen and know the ideal position to install it.

1. Unwind the antennas of the NVR;

2. Install and tighten the antennas on the IP cameras;

3. Plug the power adapter (12V/2A) into the NVR and the socket;

4. Plug the power adapter (12V/2A) into the IP Camera and the socket;

OPERATE NVR SYSTEM

Live Picture

Plug the NVR and cameras in and wait for 2-3 minutes. The live pictures from the

cameras will be displayed on the screen. Then you can connect the mouse to the NVR

and start operating the NVR system.

Notes:

•The default Username for the NVR system is admin, and the default Password is

empty (no need to enter anything);

•This NVR system can be only connected to the network by Ethernet cable currently;

•To protect your privacy, please set the password at your earliest convenience. Right

click the mouse on the main interface, then go to System setup > System Admin >

User > Set password to set a password;

Hard Disk Drive Formatting

Install the HDD first, then right click the mouse on the main interface and go to System

Setup > General Setup > HDD Setup to check its status. If it’s not Formatted, select the

right HDD, then click Format.

Video Recording

Right click the mouse on the main interface, then select System Setup > Record Setup >

Record Plan to set the record mode. The default record mode of the NVR is 24/7 all time

record.

Notice: Click Reset before you change the record mode.

Scheduled Record

After reset, select Channel and click Time to start scheduled record setup. Left click

the mouse and then select the day and hour you plan for recording. The area selected

will turn Red and click Apply to save the setting. The system will start recording at a

specific time on a daily/weekly schedule.

Motion Record

After reset, select Channel and click Motion to start motion record setup. Left click

the mouse and then select the day and hour you plan for recording. The area selected

will turn to Green and click Apply to save the setting. The system will start recording

when the camera detects any motion.

Tips:

•Changing the setting from 24/7 recording to motion recording helps to prolong your

HDD storage time.

•External device is required for Alarm record and this NVR does not support it.

Video Playback

Right click the mouse on the main interface, then select Video Playback to play the

recorded videos. Select the date with green color, Channel and Record Mode (⑥), then

click Search to list all the filtered videos.

1. Display the timeline by Day/Hour 4. Pause/Play/Fast Forward

2. Video Recording Time 5. Filtered Videos List

3. Area for Video Playing 6. Filters

Option 1: Select one video file from the Filtered Videos List (⑤), then click Play or File

Playback to play the selected video.

Option 2: Left click the mouse on the Red/Green (Red for Scheduled Record and Green

for Motion Record) part of the timeline. The videos recorded from 4 channels can be

played at the same time.

Video Backup

Option 1:

Insert a USB drive (up to 64GB and FAT32 format only), then select Video Playback to

enter the interface below.

Option 2:

Right click the mouse on the main interface then select Video Playback to enter the

interface below.

Indice

Lingue:

Altri manuali HeimVision Hardware di rete

HeimVision

HeimVision HM241 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente