3 Safety instructions
In addition to the general rules for handling electrical equip-
ment, the following safety precautions must be observed.
Read and observe the below listed information before initial
operation of the equipment.
Supply a copy of the safety precautions when selling, leasing, or
otherwise distributing this equipment.
ATTENTION!
Improper handling of the device, non-compliance with the safety
hints below, or tampering with the safety features can cause
property damage, bodily injury, electric shock, or even death.
The main function of the flash generator Nova D is to provide
electric power for specific types of flashes. It is mainly designed
for use inside a studio. Operating it outside of a studio requires
taking certain precautions, see below.
The flash generator is only to be used with the accessories ap-
proved by Hensel-Visit which are described in this manual.
The appliance may not be used for any other purpose than
described above, especially not for other electrical applications.
Set-up and initial operation
• Do not use flash units in explosive environments.
• Before connecting the Nova D to the power supply, make
sure that the mains voltage corresponds to the specifications
listed on the unit’s specification plate.
• The Nova D must only be connected to grounded power
supply systems.
• Only use plugs/connectors with flawless contacts. Burned
and/or corroded plug contacts can be the cause of fires.
Defective plugs may lead to damaged plug sockets. The
generator‘s plug sockets also need to be checked for conse-
quential damage.
• Do not connect accessories from other manufacturers, even
when these look similar or alike.
Normal use
Abnormal use