HH Solutions KM340 Manuale utente

KM340 DIGITAL

THERMOMETER

OPERATING

INSTRUCTIONS

ENGLISH

FRANÇAIS

DEUTSCH

ITALIANO

ESPAÑOL

CONTENTS

PAGE

ENGLISH

1. GENERAL INFORMATION .................. 4

2. CALIBRATION, CERTIFICATION

ANDSERVICE........................... 6

3. INTRODUCTION.......................... 8

4. OPERATING INSTRUCTIONS ............... 8

4.1 Selecting the Temperature Scale . . . . . . . . 8

4.2 Single-Thermocouple Temperature

Measurement ....................... 8

4.3 Differential Temperature Measurement...8

4.4 HOLDMode ........................ 9

4.5 MAXMode ......................... 9

5. OPERATOR MAINTENANCE................ 9

5.1 Battery Replacement. . . . . . . . . . . . . . . . . . 9

FRANÇAIS

1. GENERALITES........................... 10

2. ETALONNAGE, HOMOLOGATION,

ETENTRETIEN .......................... 12

3. PRESENTATION.......................... 14

4. CONSIGNES D’UTILISATION . . . . . . . . . . . . . . . 14

4.1 Sélection de l’echelle de Température . . . . 14

4.2 Mesure de la Température par un seul

Thermocouple ....................... 14

4.3 Mesure de la Température

Différentielle ........................ 14

4.4 Mode HOLD (MAINTIEN) . . . . . . . . . . . . . . 15

4.5 ModeMAX ......................... 15

5. CONSIGNES DE MAINTENANCE ............ 16

5.1 Remplacement de la Pile . . . . . . . . . . . . . . 16

PAGE

DEUTSCH

1. ALLGEMEINE INFORMATIONEN . . . . . . . . . . . . 17

2. KALIBRIERUNG, ZERTIFIZIERUNG

UNDSERVICE........................... 19

3. EINLEITUNG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4. BEDIENUNGSANLEITUNGEN . . . . . . . . . . . . . . 21

4.1 Anwahl der Temperaturskala............ 21

4.2 Temperaturmessung mit einem

Thermoelement...................... 21

4.3 Differentialtemperaturmessung.......... 21

4.4 Betriebsart HOLD (HALTEN) . . . . . . . . . . . 22

4.5 Betriebsart MAX . . . . . . . . . . . . . . . . . . . . . 22

5. BEDIENERWARTUNG ..................... 23

5.1 Ersatz der Batterie . . . . . . . . . . . . . . . . . . . 23

ITALIANO

1. INFORMAZIONI GENERALI . . . . . . . . . . . . . . . . 24

2. TARATURA, CERTIFICAZIONE E

MANUTENZIONE ......................... 26

3. INTRODUZIONE.......................... 28

4. ISTRUZIONI PER L’USO . . . . . . . . . . . . . . . . . . . 28

4.1 Selezione della scala di

Temperatura........................ 28

4.2 Misurazione della Temperatura con

una sola Termocoppia................. 28

4.3 Misurazione della Differenza di

Temperatura........................ 28

4.4 Modalità HOLD (pausa) . . . . . . . . . . . . . . . 29

4.5 ModalitàMAX....................... 29

5. MANUTENZIONE A CURA

DELL’OPERATORE . . . . . . . . . . . . . . . . . . . . . . . 30

5.1 Sostituzione della Batteria. . . . . . . . . . . . . . 30

PAGE

ESPANOL

1. INFORMACION GENERAL . . . . . . . . . . . . . . . . . 31

2. CALIBRACION, CERTIFICACION Y

SERVICIO ............................... 33

3. INTRODUCCION ......................... 35

4. MODO DE EMPLEO....................... 35

4.1 Elección de la escala de Temperatura . . . . 35

4.2 Medición de Temperatura mediante

un Termopar único . . . . . . . . . . . . . . . . . . . 35

4.3 Medición de Temperatura

Diferencial .......................... 35

4.4 Modalidad de Retención (HOLD) . . . . . . . . 36

4.5 Modalidad MAX...................... 36

5. MANTENIMIENTO POR EL OPERARIO ....... 37

5.1 Sustitución de la Pila.................. 37

SPECIFICATIONS.............................. 38

ENGLISH

KM340 DIGITAL THERMOMETER

OPERATING INSTRUCTIONS

1. GENERAL INFORMATION

It is recommended that you read the safety and operation

instructions before using this instrument.

WARNING

TO AVOID ELECTRIC SHOCK DO NOT ALLOW

ANY PROBE OR SENSOR TO COME INTO

CONTACT WITH LIVE ELECTRICAL POWER

CONDUCTORS WITH VOLTAGES IN EXCESS OF

30V AC RMS OR 60V DC.

TO AVOID DAMAGE OR BURNS, DO NOT

MAKE TEMPERATURE MEASUREMENTS IN

MICROWAVE OVENS.

THE SYMBOL ON THE INSTRUMENT

INDICATES THAT THE OPERATOR MUST REFER

TO THE WARNINGS GIVEN HERE.

CAUTION

Temperature Measurement Probes

This precision instrument has been designed for use

with the extensive range of Comark temperature probes.

The use of other probes may impair the performance and

accuracy of the instrument. Full details of Comark probes

and sensors can be obtained from Comark Customer

Support department or your local distributor.

Repeated sharp exing can break thermocouple probe

leads. To prolong lead life, avoid sharp bends or kinks in

the leads, especially near the connector.

This instrument complies with the Electro-

magnetic Compatibility Directive

EN61326-1.

Declarations of Conformity available.

Contact Comark Customer Support or your

local Distributor.

In line with its policy of continuous development, Comark

Instruments reserves the right to alter the instrument

specification without prior notice. Further information is

available from Comark Instruments or your distributor.

2. CALIBRATION, CERTIFICATION

AND SERVICE

Certication

Comark can provide certicates of calibration for its

whole product range, to suit ISO 9000 and other quality

assurance procedures, food hygiene regulations, HACCPs

and environmental regulations. Comark certicates are

produced by independent quality controlled processes

which compare product performance against agreed

National Standards. For peace of mind and best practice

Comark recommend annual certication/recalibration.

Two levels of certication are available for infra-red

temperature and non temperature instruments, excluding

humidity:- UKAS certicates via an external accredited

laboratory and NPL traceable certicates from the Comark

calibration laboratory.

Three levels of certication are available for contact

temperature products and these are detailed here:

a) UKAS Temperature Certication

The Comark UKAS (United Kingdom Accreditation

Service) accredited temperature calibration

laboratory is one of the nest in the UK. Comark

UKAS certicates can offer the lowest uncertainty

of 0.01°C and provide independent proof of correct

calibration using equipment and procedures audited

by UKAS inspectors. The equipment used is fully

traceable to the National Physical Laboratory.

b) UKAS Humidity Certication

In addition to the Comark temperature laboratory,

the humidity laboratory continues the tradition of

0451

high accuracy certication and a wide range (25% to

90%RH) with uncertainties of 2.8% of reading. This

range also includes Dew point measurements.

c) NPL Traceable Certication

Comark NPL certicates are traceable to the National

Physical Laboratory and can offer uncertainty as low

as 0.3°C.

Conformance

Certicates of conformance can be supplied for new,

serviced and recalibrated instruments. These conrm

that instruments are within their original manufactured

specication.

Service/Repairs

Regular servicing and any required repairs, under warranty

or after, are available from the Comark Service Department.

For more information on all Comark certication, calibration

and service facilities please call Comark Customer Support

or contact your local distributor.

3. INTRODUCTION

This instrument is a portable 31/2digit, compact-

sized digital thermometer designed to use external

type-K thermocouples as temperature sensors. It

is compatible with the full range of Comark type-K

thermocouple probes.

4. OPERATING INSTRUCTIONS

4.1 Selecting the Temperature Scale

Readings are displayed in either degrees

Celsius (°C) or degrees Fahrenheit (°F). When

the thermometer is turned on, it is set to the

temperature scale that was in use when the

thermometer was last turned off. To change the

temperature scale, press the °C or °F key.

4.2 Single-Thermocouple Temperature

Measurement

The thermometer displays the temperature

of the thermocouple that is connected to the

selected input. Press the T2 key to display the

temperature of the thermocouple connected to

the T2 input. Press the T1 key to display the

temperature of the thermocouple connected

to the T1 input. The selection cursor indicates

which input is selected.

4.3 Differential Temperature

Measurement

Differential temperature measurement

is selected by pressing the T1-T2 key.

This causes the thermometer to display

the temperature difference between the

two thermocouples (the temperature of

thermocouple T1 minus the temperature of

thermocouple T2). The selection is indicated by

the input selection cursor.

4.4 HOLD Mode

Pressing the HOLD key to enter the Data

Hold mode, the “D-H” annunciator is

displayed. When HOLD mode is selected, the

thermometer holds the present reading and

stops all further measurements.

Pressing the HOLD key again cancels HOLD

mode, causing the thermometer to resume

taking measurements.

4.5 MAX Mode

Press the MAX key to enter the MAX mode.

The thermometer then records and updates

the maximum value for that input. The MAX

annunciator appears on the display. Press

the MAX key again to exit the MAX recording

mode.

In the MAX mode, press HOLD key to stop

the recording, press HOLD again to resume

recording.

The maximum function is limited to use on

a single temperature scale at a time and

for readings which do not make a transition

through zero.

5. OPERATOR MAINTENANCE

5.1 Battery Replacement

Power is supplied by a 9 volt, PP3 battery.

The battery sign appears on the LCD display

when a replacement is needed. To replace the

battery, remove the three screws from the back

of the instrument and lift off the front case.

Exchange the battery in the protection tube

located at the top of the rear cover. Replace

the instrument front squarely with the rear

cover and secure with the three screws.

Indice

Lingue:

Manuali Termometro popolari di altre marche

Delton

Delton 981A Manuale utente

Baker

Baker MM2P Manuale utente

Tarmo

Tarmo 320281 Manuale utente

Citizen

Citizen CTD 504 Manuale utente

TFA

TFA 14.1500 Manuale utente

Vive

Vive DMD1010 Manuale utente

Gotemp

Gotemp THB4002 Manuale utente

GREISINGER

GREISINGER G 1202 Manuale utente

Amprobe

Amprobe TMD-53W Manuale utente

Trotec

Trotec BP10 Manuale utente

Radiance instruments

Radiance instruments RT616 Series Manuale utente

Eurolec

Eurolec IR151 Manuale utente

Scaneo

Scaneo TS42B Manuale utente

Sper scientific

Sper scientific 800043 Manuale utente

Microlife

Microlife NC 200 Manuale di istruzioni

Motorola

Motorola MBP69SN Guida alla configurazione

The MeatStick

The MeatStick The MeatStick Manuale utente

Hama

Hama TH35-A Manuale utente