PGL-KIT-RZRT 2
IMPORTANT PRODUCT USE AND SAFETY INFORMATION / WARNINGS
This product is designed for use on ATVs and/or RUVs to lower the final drive gear ratio and increase ground
clearance. Purchasers should be aware that use of this product may increase the frequency of required
maintenance, part wear, and will raise the center of gravity on your ATV and/or RUV, increasing risk of roll-over,
injury and death on all types of terrain. It is your responsibility to always inform other operators and
passengers of this vehicle about the added risks with this product.
High Lifter’s products are designed to best fit user’s ATV/RUV under stock conditions. Adding, modifying, or
fabricating any OEM or aftermarket parts will void warranty. High Lifter Products, products could interfere with
other aftermarket accessories. If the user has aftermarket products on machine, contact High Lifter Products to
verify that they will work together. Adding aftermarket suspension components and/or more aggressive tires
can cause breakage of other OEM driveline components such as differentials, axles or drive shafts.
Riders should be advised that the handling characteristics of a taller ATV and/or RUV are different and require
extra care when riding, particularly on the side of hills or off-camber situations. If you further raise the center
of gravity by adding taller tires, heavy loads to racks or seats, or by any other means, the ATV and/or RUV must
be operated with even more care, at slower speeds and on relatively flat ground. All turns should be done at a
slow speed, even on level ground.
Operation of an ATV and/or RUV with or without modified suspension components, while or shortly after
consuming alcohol or drugs, subjects the rider and passengers to the risk of serious bodily harm or possible
death. This risk is compounded if the riders do not wear an approved helmets and other safety gear. High Lifter
urges that all approved safety gear be worn when riding an ATV and/or RUV as a driver or passenger.
By purchasing and installing High Lifter Products, products, user agrees that should damages occur, High Lifter
Products will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges.
High Lifter Products will not be held responsible for any direct, indirect, incidental, special, or consequential
damages that result from any product purchased from High Lifter Products. The total liability of seller to user
for all damages, losses, and causes of action, shall not exceed the total purchase price paid for the product that
gives rise to the claim.
Dealers and other Installers
You are responsible for informing your customer and end user of the information contained above and the
increased potential hazards of operating an ATV and/or RUV equipped with modified suspension components.
If you install any suspension modifying components, it is your responsibility to also install the warning label
prominently in view of the driver and in prominent view of the driver and passenger on RUVs and multi-
passenger ATVs. They should also be instructed to notify anyone operating the vehicle, as well as any
passengers, that said vehicle is modified.
As discussed above, it is critically important that they be instructed in the need for slower speed operation,
regardless of terrain, after this lift kit is installed.
