HighPoint SSD7140A Manuale utente

SSD7140A

8x M.2 Port to PCIe 3.0x16 NVMe RAID Controller

Quick Installation Guide

V1.00

System Requirements

PC Requirements

System with a free PCIe3.0 (or 4.0) x16 slot

Windows 10, Windows Server 2016 and Windows Server 2019

Linux kernel 3.10 and later

macOS 10.13 and later

SSD7140 Kit Content

SSD7140A Controller Card

Quick Installation Guide

SSD7140A Hardware

Front View

Full-Length anodized aluminum heat sink

Full Height form factor

0000

Low-Noise Cooling Fan

External power port

PCIe 3.0 x16 Host Interface

Hardware Installation

Step 1. On the rear of the SSD7140A, remove the six screws that secure

the unit’s heat sink to the PCB.

Step 2. Carefully remove fan’s power cable from the right-side of the

heatsink as shown below, then carefully flip the heatsink to the

left (like turning a page from a book).

Note: Take care when moving the heatsink to prevent damaging

the left fan’s power cable.

Step 3. After removing the casing, carefully turn it over to view the

thermal pad. The blue films must be removed from the pad before

reinstalling the panel. These films protect the pad from damage and

foreign objects prior to installation, however, they will also prevent the

thermal pad from conducting the heat away from the NVMe SSD's if

we don't remove it.

Step 4. These 8 screws are used to install the NVMe SSD’s.

Step 5. Please remove these screws from each of the M.2 slots.

Step 6. Gently insert the SSD into the slot.

Note: Please make sure all disks are clean before you insert them

into the slot to avoid unexpected situations.

Step 7. Refasten the screw to secure the SSD.

Repeat Steps 4 to 6 to install the remaining SSDs.

The following example shows eight M.2 NVMe SSDs installed into

Ports 1-8:

Step 8. After installing all SSDs, carefully flip the heatsink to the right.

Note: Make sure each SSD is carefully aligned and fastened to the

SSD7140A using the supplied screws. Loosely attached SSDs may

not be detected by the SSD7140A or host system.

Step 9. Carefully reinsert in the power supply cable of the cooling fan

that was removed in step 2.

Step 10. On the rear of the SSD7140A, refasten the 6 screws that were

removed in step 1.

Note

：

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the

thermal pad, before refastening it to the SSD7140A. If the cover is

improperly installed, the fan and thermal pad will be unable to

sufficiently cool the NVMe SSD’s and controller componentry,

which may result in damage to the SSD’s or controller hardware,

performance loss, unstable I/O, and the loss of data.

Step 11. Power up the SSD external power supply

Note: If the external power supply is not powered on, the SSDs

may drop offline or remain undetected, which could lead to data

loss.

SSD7140A relies on two power sources to support eight SSDs;

power supplied through the PCIe bus, and power from the

system’s PSU via an external 6 pin PCIe power cable. If the

external cable is not connected, there will be insufficient power to

support all 8 SSD’s; this may cause the SSDs to drop offline.

Note

：

The SSD7140A does not require the external power cord

when used with 2019 Mac pro systems.

Note: Please be sure to connect NVMe before using the product to

reduce the occurrence of unnecessary errors!

Note: Install the driver in the system first and then install the board

Connect 6 pin PCIe power cable

Resources

A variety of manuals, guides and FAQ’s are available for the

SSD7140A RAID controller.

In addition, we recommend visiting the Software Downloads webpage

for the latest drivers, management interfaces, and installation guides.

Software Download:

SSD7140A Driver, WebGUI, Installation Guides

https://highpoint-tech.com/USA_new/series-ssd7140-download.htm

Other Reference Information:

Mother Board & NVMe SSD Compatibility List

SSD7140A User Guides

https://highpoint-tech.com/USA_new/series-ssd7140-resource.htm

Altri manuali per SSD7140A

Indice

Altri manuali HighPoint Hardware per computer

HighPoint

HighPoint SSD7103 Manuale utente

HighPoint

HighPoint SRD7204DC Manuale utente

HighPoint

HighPoint rDrive 6628TW Manuale utente

HighPoint

HighPoint Rocket 1108A Manuale utente

HighPoint

HighPoint R1000 Series Manuale utente

HighPoint

HighPoint RocketAIC 7505HM Series Manuale utente

HighPoint

HighPoint SSD7540 Manuale utente

HighPoint

HighPoint RocketRAID 2680 Manuale utente

HighPoint

HighPoint RR3740 Manuale utente

HighPoint

HighPoint RocketRAID 3622 Manuale utente

HighPoint

HighPoint SRD7104FDC Manuale utente

HighPoint

HighPoint Rocket 750 Manuale utente

HighPoint

HighPoint RocketAIC 7749EM Manuale utente

HighPoint

HighPoint RocketRAID 4520 Manuale utente

HighPoint

HighPoint SSD6200 Series Manuale utente

HighPoint

HighPoint R1508 Manuale utente

HighPoint

HighPoint RocketAIC 7540HW Guida

HighPoint

HighPoint SSD7104 Manuale utente

HighPoint

HighPoint SSD7540 Manuale utente

HighPoint

HighPoint SSD6200 Series Manuale utente

HighPoint

HighPoint BRD Series Manuale utente

HighPoint

HighPoint R1104F Manuale utente

HighPoint

HighPoint SSD7502 Manuale utente

HighPoint

HighPoint RocketRAID 3700 Series Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente