HighPoint SSD7000 Series Manuale utente

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

SSD7000 Controller

Linux Rocky Linux

Installation Guide

Last updated on April 24, 2023

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

Table of Contents

1 Overview .......................................................................................................................................1

2 Installing Linux Rocky Linux on SSD7000 controller ..............................................................1

Step 1 Prepare Your Hardware for Installation..........................................................................1

Step 2 Check System EFI Settings............................................................................................1

Step 3 Flash UEFI Rom to SSD7000 ........................................................................................3

Step 4 Create Array ...................................................................................................................4

Step 5 Prepare the Driver Diskette............................................................................................4

Step 6 Install Rocky Linux........................................................................................................5

3 Monitoring the Driver ...............................................................................................................10

4 Installing RAID Management Software...................................................................................10

5 Trouble Shooting ........................................................................................................................10

6 Rebuilding Driver Module for System Update ........................................................................ 11

7 Appendix A ................................................................................................................................. 11

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

- 1 -

1 Overview

The purpose of this document is to provide clear instructions on how to install Linux

Rocky Linux on the SSD7000 controller.

Supported system: Rocky Linux 8.6/8.7/9.0/9.1

Supported controller: SSD7540/7505/7502/7202/7105

2 Installing Linux Rocky Linux on SSD7000

controller

If you would like to install Linux Rocky Linux onto drives attached to SSD7000 controller,

please perform the following operations:

Step 1 Prepare Your Hardware for Installation

After you attach your NVMe SSD to SSD7000 controller, you can use SSD7000 EFI

Utility to configure your NVMe SSD as RAID arrays, or just use them as single disks.

Before installation, you must remove all the NVMe SSD, which are not physically attached

to SSD7000 controller, from your system.

Note

SSD7000 only support EFI boot. If you have other SCSI adapters installed, you must

make sure the SSD7000 controller EFI will be loaded firstly. If not, try to move it to

another PCI slot. Otherwise you may be unable to boot up your system.

Step 2 Check System EFI Settings

In your system EFI SETUP menu, change Boot Sequence in such a way that the system

will first boot from EFI CDROM or EFI a Bootable USB drive, after you finish

installation, set SSD7000 RAID controller as the first boot device to boot up the system.

Refer to your motherboard EFI manual to see how to set boot sequence.

1. Set UEFI setting with SuperMicro X11DPi-NT motherboard as an example.

a. "Advanced->PCIe/PCI/PnP Configuration->CPUSlot PCI-E OPROM"

to "EFI". Suppose SSD7000 is connected to motherboard CPU1 Slot 2 PCI-E X16,

then you should set "CPU1 Slot 2 PCI-E X16 OPROM" to "EFI";

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

- 2 -

b. Disable "Secure Boot", set "Attempt Secure Boot" to "Disabled".

2. Set UEFI setting with ASUS PRIME X299 -DELUXE motherboard as an example:

a. Set "Boot from Storage Devices" to "UEFI driver first";

b. And "Boot Device Control" to "UEFI Only" or "UEFI and Legacy OPROM";

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

- 3 -

c. Set "OS Type" to "Other OS".

Step 3 Flash UEFI Rom to SSD7000

For Example SSD7505：

Note

：

Make sure your USB flash partition format is FAT32.

For other products, please refer to: Update UEFI ROM

a. Unzip SSD7000 UEFI package to root dir(/) of a USB flash drive, and insert the

USB flash drive to the motherboard;

b. Booting from the UEFI USB flash and enter the UEFI environment;

c. Command with “go.nsh”, flash UEFI rom to SSD7000 Controller and reboot;

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

- 4 -

Step 4 Create Array

a. Attach two NVMe SSD to SSD7000 Controller;

b. Boot, enter the motherboard’s Boot List and select start from UEFI USB flash:

c. Command “ArrayCreate.efi” to enter the Utility:

d. Command “create RAID0”.

Create RAID0 array with all disks and with maximum capacity.

e. Command “exit”；

f. For more command usages, refer to Appendix A.

Step 5 Prepare the Driver Diskette

Extract HighPoint_NVMe_Rocky_Linuxxx.xx_x86_64_vx.x.x_xx_xx_xx.tar.gz to top(/)

directory of an USB flash drive. It will look like:

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

- 5 -

Step 6 Install Rocky Linux

For Example：Rocky Linux9.1

a. Before you do the following, verify the status of your network environment. To

ensure a proper installation, it is recommended to disconnect the network and install

the system in a network less environment.

b. Insert the USB flash drive to the target system.

c. Booting from Bootable USB drive (EFI mode).

d. When the Installation screen appears, press ‘e’ to edit boot command line option.

On the edit command window, move the cursor to the end of line "linuxefi /images /

pxeboot... ", and append "modprobe.blacklist=nvme " (double quotation mark are not

include).

Press CTRL+X or F10 to start the system.

e. When the following window appears during the installation process,

Press CTRL+ALT+F2 to switch to the shell on console 2, and press ENTER to activate

this console.

and the then execute following commands to copy the driver contents:

# mkdir /hptdd← Create mount point for USB flash drive

# mount /dev/sda1 /hptdd/ ← Mount the USB flash drive to /hptdd

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

- 6 -

#cp -a /hptdd/hptdd /tmp/ ← Copy driver installation file to system temporary

directory

# umount /hptdd ← Unmount the USB flash drive

When the USB flash drive is unmounted, please unplug the USB flash drive from the

mainboard. And then execute following command to install driver to install the Linux

Rocky Linux.

# sh /tmp/hptdd/ rhel-install-step1.sh ← Load SSD7000 driver.

f. Then press ALT+F6to switch back to installation screen and continue the installation as

usual.

g. When the following window appears during the installation process,

1) Set Root Password

2) Select Installation Destination and click “refresh”

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

- 7 -

then choose your own disk.

3) Set Software Selection and choose Server with GUI→Development Tools

Linux Rocky Linux on SSD7540/7505/7502/7202/7105 Installation Guide

- 8 -

Then begin installation.

h. If the following information is displayed during the installation, select “Ye s ”.

i. When the screen shows that “complete!”.

press CTRL+ALT+F2 to the shell and type the following commands:

# cp -r /tmp/hptdd /mnt/sysimage/tmp/hptdd ←Copy the driver installation file to

SSD7000

# chroot /mnt/sysimage ←Switch to the top(/) directory in the SSD7000 system

# sh /tmp/hptdd/rhel-install-step2.sh ← Install SSD7000 driver

# rm -rf /tmp/hptdd ← Delete the driver file in SSD7000

# exit ← Exit the top(/) directory of the SSD7000 system

Altri manuali per SSD7000 Series

Indice

Altri manuali HighPoint Controllori

HighPoint

HighPoint RocketRAID mini SAS 3G HBA Series Manuale utente

HighPoint

HighPoint SSD7000 Series Manuale utente

HighPoint

HighPoint SSD6202A Manuale utente

HighPoint

HighPoint RocketRAID 174x Manuale utente

HighPoint

HighPoint SSD7105 Manuale utente

HighPoint

HighPoint SSD7120 Manuale utente

HighPoint

HighPoint SSD7103 Manuale utente

HighPoint

HighPoint SSD7180 Manuale utente

HighPoint

HighPoint RocketRAID mini-SAS 6G HBA Series Manuale utente

HighPoint

HighPoint SSD7749M Manuale utente

HighPoint

HighPoint HPT366 Manuale di installazione e d'uso

HighPoint

HighPoint RocketU 1144B Manuale utente

HighPoint

HighPoint SSD7110 Foglio di istruzioni

HighPoint

HighPoint Rocket Dual eSATA 6Gb/s For Mac Manuale utente

HighPoint

HighPoint RocketRAID 3G mini SAS HBA Series Manuale utente

HighPoint

HighPoint RocketU 1142A Manuale utente

HighPoint

HighPoint Rocket 760A Manuale utente

HighPoint

HighPoint RocketRAID 272 Series Manuale utente

HighPoint

HighPoint R1000 Series Manuale utente

HighPoint

HighPoint RocketRAID 2840A Manuale utente

HighPoint

HighPoint SSD7749E Manuale utente

HighPoint

HighPoint Rocket 620 Manuale utente

HighPoint

HighPoint Rocket 710L Manuale utente

HighPoint

HighPoint RR640L Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente