HIK VISION DS-K1201MF Manuale utente

Fingerprint

Card Reader

User Manual

Fingerprint and Card Reader User Manual

User Manual

This manual is applied for fingerprint and card reader.

Device Name

Model

Fingerprint and Card

Reader

DS-K1201MF

DS-K1201EF

DS-K1201SF

It includes instructions on how to use the Product. The software embodied in

the Product is governed by the user license agreement covering that Product.

About this Manual

This Manual is subject to domestic and international copyright protection.

Hangzhou Hikvision Digital Technology Co., Ltd. (“Hikvision”) reserves all

rights to this manual. This manual cannot be reproduced, changed, translated,

or distributed, partially or wholly, by any means, without the prior written

permission of Hikvision.

Trademarks

and other Hikvision marks are the property of Hikvision and

are registered trademarks or the subject of applications for the same by

Hikvision and/or its affiliates. Other trademarks mentioned in this manual are

the properties of their respective owners. No right of license is given to use

such trademarks without express permission.

Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, HIKVISION

MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT

LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, REGARDING THIS MANUAL. HIKVISION DOES

NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING

THE USE OF THE MANUAL, OR THE CORRECTNESS, ACCURACY, OR RELIABILITY

OF INFORMATION CONTAINED HEREIN. YOUR USE OF THIS MANUAL AND ANY

Fingerprint and Card Reader User Manual

RELIANCE ON THIS MANUAL SHALL BE WHOLLY AT YOUR OWN RISK AND

RESPONSIBILITY.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT

WILL HIKVISION, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE

LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR

INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF

BUSINESS PROFITS, BUSINESS INTERRUPTION, SECURITY BREACHES, OR LOSS

OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF OR

RELIANCE ON THIS MANUAL, EVEN IF HIKVISION HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES.

SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

LIABILITY OR CERTAIN DAMAGES, SO SOME OR ALL OF THE ABOVE

EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.

Support

Should you have any questions, please do not hesitate to contact your local

dealer.

Fingerprint and Card Reader User Manual

iii

Regulatory Information

FCC Information

Please take attention that changes or modification not expressly approved by

the party responsible for compliance could void the user’s authority to

operate the equipment.

FCC compliance: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

Fingerprint and Card Reader User Manual

2. This device must accept any interference received, including interference

that may cause undesired operation.

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized European

standards listed under the EMC Directive 2014/30/EU,

the RoHS Directive 2011/65/EU.

2012/19/EU (WEEE directive): Products marked with

this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or

dispose of it at designated collection points. For more information see:

www.recyclethis.info

2006/66/EC (battery directive): This product contains a

battery that cannot be disposed of as unsorted

municipal waste in the European Union. See the

product documentation for specific battery

information. The battery is marked with this symbol,

which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury

(Hg). For proper recycling, return the battery to your supplier or to a

designated collection point. For more information see: www.recyclethis.info

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements.

Fingerprint and Card Reader User Manual

Use only power supplies listed in the user instructions:

Model

Manufacturer

Standard

DSA-12PFT-12FUK 120100

Dee Van Enterprise Co., Ltd.

DSA-12PFT-12FAU 120100

Dee Van Enterprise Co., Ltd.

DSA-12PFT-12FIN 120100

Dee Van Enterprise Co., Ltd.

DSA-12PFT-12FUS 120100

Dee Van Enterprise Co., Ltd.

IEC

DSA-12PFT-12 FBZ 120100

Dee Van Enterprise Co., Ltd.

NBR

Safety Instruction

These instructions are intended to ensure that user can use the product

correctly to avoid danger or property loss.

The precaution measure is divided into Warnings and Cautions:

Warnings: Neglecting any of the warnings may cause serious injury or death.

Cautions: Neglecting any of the cautions may cause injury or equipment

damage.

Warnings

All the electronic operation should be strictly compliance with the

electrical safety regulations, fire prevention regulations and other related

regulations in your local region.

Warnings Follow these

safeguards to prevent serious

injury or death.

Cautions Follow these

precautions to prevent potential

injury or material damage.

Fingerprint and Card Reader User Manual

Please use the power adapter, which is provided by normal company. The

power consumption cannot be less than the required value.

Do not connect several devices to one power adapter as adapter overload

may cause over-heat or fire hazard.

Please make sure that the power has been disconnected before you wire,

install or dismantle the device.

When the product is installed on wall or ceiling, the device shall be firmly

fixed.

If smoke, odors or noise rise from the device, turn off the power at once

and unplug the power cable, and then please contact the service center.

If the product does not work properly, please contact your dealer or the

nearest service center. Never attempt to disassemble the device yourself.

(We shall not assume any responsibility for problems caused by

unauthorized repair or maintenance.)

Cautions

Do not drop the device or subject it to physical shock, and do not expose it

to high electromagnetism radiation. Avoid the equipment installation on

vibrations surface or places subject to shock (ignorance can cause

equipment damage).

Do not place the device in extremely hot (refer to the specification of the

device for the detailed operating temperature), cold, dusty or damp

locations, and do not expose it to high electromagnetic radiation.

The device cover for indoor use shall be kept from rain and moisture.

Fingerprint and Card Reader User Manual

vii

Exposing the equipment to direct sun light, low ventilation or heat source

such as heater or radiator is forbidden (ignorance can cause fire danger).

Do not aim the device at the sun or extra bright places. A blooming or

smear may occur otherwise (which is not a malfunction however), and

affecting the endurance of sensor at the same time.

Please use the provided glove when open up the device cover, avoid direct

contact with the device cover, because the acidic sweat of the fingers may

erode the surface coating of the device cover.

Please use a soft and dry cloth when clean inside and outside surfaces of

the device cover, do not use alkaline detergents.

Please keep all wrappers after unpack them for future use. In case of any

failure occurred, you need to return the device to the factory with the

original wrapper. Transportation without the original wrapper may result

in damage on the device and lead to additional costs.

Improper use or replacement of the battery may result in hazard of explosion.

Replace with the same or equivalent type only. Dispose of used batteries

according to the instructions provided by the battery manufacturer.

0100001071027

The device must not be co-located or operating in conjunction with any other antenna

or transmitter

Fingerprint and Card Reader User Manual

Content

Chapter 1 Introduction........................................................ 3

1.1 Product Overview.....................................................3

1.2 Product Appearance.................................................3

Chapter 2 Installation.......................................................... 5

2.1 Introduction for DIP Switch ......................................5

2.2 Definition of Cable....................................................6

2.3 Wiring Cables ...........................................................6

2.4 Installing Card Reader...............................................7

Chapter 3 Sound Prompt and Indicator................................ 9

Appendix: Tips for Scanning Fingerprint ................................. 11

Fingerprint and Card Reader User Manual

Chapter 1 Introduction

1.1 Product Overview

Fingerprint and card reader is a kind of high-performance product,

with a 32 bit high-speed processor. It communicates with access

controller via the RS-485 protocol. And a built-in tamper-proof

module helps to protect card reader from malicious damage.

1.2 Product Appearance

Figure 1-1 Front View

Figure 1-2 Rear View

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali HIK VISION Lettore di schede

HIK VISION

HIK VISION DS-K1802 Series Manuale utente

HIK VISION

HIK VISION DS-K1100 Series Manuale utente

HIK VISION

HIK VISION DS-K1108AM Manuale utente

HIK VISION

HIK VISION DS-k1106 Manuale utente

HIK VISION

HIK VISION DS-K1200 Series Manuale di istruzioni

HIK VISION

HIK VISION DS-K1101M Manuale utente

HIK VISION

HIK VISION DS-TRI4 Series Manuale utente

HIK VISION

HIK VISION DS-K1T500 Manuale utente

HIK VISION

HIK VISION DS-K1201A Series Manuale utente

HIK VISION

HIK VISION D8E Series Manuale utente

HIK VISION

HIK VISION LTK1802 Series Manuale utente

HIK VISION

HIK VISION DS-K1101M Manuale utente

HIK VISION

HIK VISION DS-K1100M Series Manuale utente

HIK VISION

HIK VISION UD30374B-A Manuale utente

HIK VISION

HIK VISION DS-K1109 Series Manuale utente

HIK VISION

HIK VISION DS-K1801 Series Manuale utente

HIK VISION

HIK VISION DS-K1108 Series Manuale utente

HIK VISION

HIK VISION DS-K1107 Series Manuale utente

HIK VISION

HIK VISION DS-K1100 Series Manuale utente

HIK VISION

HIK VISION DS-K1107A Series Manuale utente

HIK VISION

HIK VISION DS-K1108A Series Manuale utente

HIK VISION

HIK VISION DS-PT1-WE Manuale utente

HIK VISION

HIK VISION DS-K1106M Manuale utente

HIK VISION

HIK VISION DS-K1201AEF Manuale utente

Manuali Lettore di schede popolari di altre marche

Lindy

Lindy 43185 Manuale utente

Lindy

Lindy 43185 Manuale utente

ViziT

ViziT RD-4F Manuale utente

Jinmuyu Electronics

Jinmuyu Electronics MR811 Series Manuale utente

AVID ID

AVID ID AVID1043 Manuale utente

Conrad

Conrad PCMCIA Manuale utente

Rosslare

Rosslare DR-6255 Manuale utente

Lindy

Lindy 51541 Manuale utente

Diapro T?bbi Ürünler

Diapro T?bbi Ürünler Across System Manuale utente

Johnson Controls

Johnson Controls Kantech tyco ioSmart Manuale utente

ACS

ACS ACR122L Manuale utente

Secukey

Secukey S2-MF Manuale utente

Elecom

Elecom MR-SMC07 series Manuale utente

Alien

Alien ALR-9800 Manuale utente

ACS

ACS ACR310 Manuale utente

Datamars

Datamars R-IN1300 MID Manuale utente

Alarm Lock

Alarm Lock AL-PRE2 Manuale utente

xpr

xpr B100PROX-AH Guida utente