HIK VISION DS-2CC52H1T-FITS Manuale utente

HD Fisheye Camera

User Manual

UD01467B

User Manual

Thank you for purchasing our product. If there are any questions,

or requests, please do not hesitate to contact the dealer.

This manual applies to the model DS-2CC52H1T-FITS.

This manual may contain several technical incorrect places or

printing errors, and the content is subject to change without

notice. The updates will be added to the new version of this

manual. We will readily improve or update the products or

procedures described in the manual.

Privacy Notice

Surveillance laws vary by jurisdiction. Check all relevant laws in

your jurisdiction before using all this product for surveillance

purpose to ensure that your use of this product conforms.

Regulatory Information

FCC Information

FCC compliance: This equipment has been tested and found to

comply with the limits for a digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if

not installed and used in accordance with the instruction manual,

may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to

correct the interference at his own expense.

FCC Conditions

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation

EU Conformity Statement

This product and - if applicable - the supplied

accessories too are marked with "CE" and comply

therefore with the applicable harmonized

European standards listed under the Low Voltage

Directive 2014/35/EU, the EMC Directive 2014/30/EU.

2002/96/EC (WEEE directive): Products marked

with this symbol cannot be disposed of as unsorted

municipal waste in the European Union. For proper

recycling, return this product to your local supplier

upon the purchase of equivalent new equipment,

or dispose of it at designated collection points. For more

information see: www.recyclethis.info.

2006/66/EC (battery directive): This product

contains a battery that cannot be disposed of as

unsorted municipal waste in the European Union.

See the product documentation for specific battery

information. The battery is marked with this

symbol, which may include lettering to indicate

cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,

return the battery to your supplier or to a designated collection

point. For more information see: www.recyclethis.info.

Industry Canada ICES-003 Compliance

This device meets the CAN ICES-3 (A)/NMB-3(A) standards

requirements.

1000001060520

1Introduction

1.1 Product Features

This series of camera adopts high performance sensor and

advanced circuit board design technology. It features high

resolution, low distortion, and low noise, etc. It is suitable for

surveillance system and image process system.

5 Megapixel high-performance CMOS

HD TVI output, up to 5Mega ` resolution

0.01Lux @ (F1.2,AGC ON), 0 Lux with IR

IR cut filter with auto switch

OSD menu

Built-in microphone, 1-ch audio output

1.2 Overview

Camera Body

Photoconductive

Resistance Microphone

Audio Cable (Red)

HD TVI Cable (Gray)

12V DC Power Cable

Lens

Base Plate

2Installation

Before you start:

Please make sure that the device in the package is in good

condition and all the assembly parts are included.

Make sure that all the related equipment is power-off during

the installation.

Check the specification of the products for the installation

environment.

Check whether the power supply is matched with your

required output to avoid damage.

Please make sure the wall is strong enough to withstand three

times the weight of the camera and the mounting.

If the wall is the cement wall, you need to insert expansion

screws before you install the camera. If the wall is the wooden

wall, you can use self-tapping screw to secure the camera.

If the product does not function properly, please contact your

dealer or the nearest service center. Do not disassemble the

camera for repair or maintenance by yourself.

2.1 Ceiling Mounting

Steps:

1. Drill two screw holes and the cable hole according to the

supplied drill template.

φ24

φ102

2-φ3.4

41.75

2. Align the screw holes and cable hole on the drill template and

the base plate, and then fix the base plate to the ceiling with

the two supplied screws.

Ceiling

Base Plate

Notes:

●For cement wall, you need to use the expansion screw to fix the

mount.

●For wooden wall, you can just use the self-tapping screw to fix the

mount.

3. Route the cables through the cable hole or the side opening

according to the actual needs, and connect the corresponding

cables including power cable, network cable, audio and alarm

cables, etc.

4. Align the triangle mark on the camera and base plate, and

then rotate the camera clockwise until it is locked up by the

three bayonet joints on the base plate.

5. To disassemble the camera: Press the Push button on the base

plate, rotate the camera anticlockwise, and then you can

remove the camera from the base plate.

PUSH

6. To adjust the view angle: Rotate the camera body clockwise or

anticlockwise with the base plate, and then you can adjust the

camera to the desired view angle.

15°15°

2.2 Wall Mounting with a Slant Mounting Base

Before you start:

You need to purchase a slant mounting base separately if this

mounting method is selected.

Steps:

1. Drill two screw holes and the cable hole according to the

supplied drill template.

2-26

φ24

φ102

2-φ3.4

41.75

83.5

2. Fix the slant mounting base to the wall with the screws.

Mounting Base

Wall

3. Align the screw holes on the slant mounting base and the base

plate, and then secure the base plate on the slant mounting

base with the two supplied screws.

4. Route the cables through the cable hole or the side opening

according to the actual needs, and connect the corresponding

cables including power cable, network cable, audio and alarm

cables, etc.

5. Align the triangle mark on the camera and mounting base, and

then rotate the camera clockwise until it is locked up.

6. The installation is complete.

7. To disassemble the camera: Press the Push button on the base

plate, rotate the camera anticlockwise, and then you can

remove the camera from the base plate.

PUSH

2.3 Wall Mounting with a Bracket

Before you start:

You need to purchase the bracket separately if this mounting

method is selected.

Steps:

1. Unfasten and remove the screw marked in the figure, and then

disassemble the bracket.

Indice

Altri manuali HIK VISION Telecamera di sicurezza

HIK VISION

HIK VISION DS-2CC5181P-VPIR Manuale utente

HIK VISION

HIK VISION DS-2CE16D0T-IR/IRP Manuale utente

HIK VISION

HIK VISION DS-2CD852F Series Manuale utente

HIK VISION

HIK VISION TURBO HD DF7T Series Manuale utente

HIK VISION

HIK VISION DS-HD2 Manuale utente

HIK VISION

HIK VISION iDS-TCE907-BR Manuale utente

HIK VISION

HIK VISION DS-2TD4136T-9 Manuale utente

HIK VISION

HIK VISION UD.6L0201B1015A01 Manuale utente

HIK VISION

HIK VISION DS-2CD63C5G1-IVS Manuale utente

HIK VISION

HIK VISION DS-2CE12KF3T-PIRXO Manuale utente

HIK VISION

HIK VISION DS-2CD4312 Guida utente

HIK VISION

HIK VISION DS-2CD793PFWDNFWD-EIZ Manuale utente

HIK VISION

HIK VISION DS-2CE16H0T-ITF Manuale utente

HIK VISION

HIK VISION DS-2DF1-512 Manuale utente

HIK VISION

HIK VISION DS-2CD855-E Guida utente

HIK VISION

HIK VISION DS-2CD7133-E Manuale utente

HIK VISION

HIK VISION DS-2XE6825G0-IZHS Manuale utente

HIK VISION

HIK VISION TURBO HD F1T Series Manuale utente

HIK VISION

HIK VISION DS-2DY7236IX-A Manuale utente

HIK VISION

HIK VISION iDS-TCR803-B Manuale utente

HIK VISION

HIK VISION iDS-TCD403-BI Manuale utente

HIK VISION

HIK VISION DS-2DP0818Z-D Manuale utente

HIK VISION

HIK VISION I0D2400 Manuale utente

HIK VISION

HIK VISION TURBO HD D0T PIR Series Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente