THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTANDYOURSECURITY SYSTEM
AND BECOME PROFICIENT IN ITS OPERATION. ALL USERS OF YOUR SECURITY
SYSTEM SHOULD READ AND FOLLOW THE INSTRUCTIONS AND PRECAUTIONS IN
THIS BOOKLET BEFORE OPERATING YOUR SECURITYCONTROL SYSTEM. FAILURE
TO DO SO COULD RESULT IN THE SECURITY SYSTEM NOT WORKING PROPERLY.
THIS BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE LOCATION FOR THE LIFE OF
THE SECURITY SYSTEM. IF YOU DO NOT UNDERSTAND ANY PART OF THIS
MANUAL, YOU SHOULD NOTIFY YOUR INSTALLING COMPANY. READ THE ENTIRE
MANUAL AND, IF POSSIBLE, PRACTICE ON THE KEYPAD CONTROL WHILE YOUR
PROFESSIONAL INSTALLER IS ON SITE.
TheSECURITY CONTROLcanbe turned on (ARMED) and off (DISARMED) byentering a 4
or 6 digit code into the Keypad Control, which is similar to a telephone keypad. If your
SecurityControlhas been so programmed, youmay beableto turnon(ARM)yourSystemby
simplypressingthe [STAY] or [EXIT] key. The system must always be Disarmed using a4 or
6 digit code. The LCD keypad includes 9 lights and a 32-character liquid crystal display and a
built-in electronic sounder. These provide specific information relating to the status of the
security system which is described in the booklet. Understanding what the lights and sounds
mean will help you to easily operate your system.
KEEP IN MIND, THE LEVEL OF SECURITY YOU WILL OBTAIN WITH THIS SYSTEM
RELATES SPECIFICALLY WITH TWO MAJOR FACTORS:
1. The quantity, quality, and placement of security devices attached to this system.
2. The knowledge you have of the security system and how that knowledge is utilized
in a weekly test of the complete system.
YOU SHOULD BE AWARE OF THE FOLLOWING FACTS WHEN PREPARING A
SAFETY/SECURITY PLAN FOR YOUR HOME/BUSINESS.
1. Your security system is an electronic device and like anyelectronic device is subject
to failure or malfunction. Do not rely on it as your single source of security.
2. Your system should be tested weekly.
3. Your system will not work without power.
4. Warning devices will need to beloudenough,wiredcorrectly,and properlyplaced to
provide notification of an alarm event.
5. Smoke and heat detectors may not detect heat and smoke in all situations.
6. Use qualified security professionals to install and maintain your security system.
7. It may be possible to arm the security system without the backup batteryconnected.
Your periodic test should be done with A.C. power removed to verify the battery is
connected and adequately charged.
8. Care should be taken to plug in and restrain the A.C. Transformer after testing.
This product is to be installed by qualified SERVICE PERSONNEL only
The equipment should only be operated with an approved power adapter with insulated
live pins.
CAUTION – RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF BATTERIES ACCORDING TO THE INSTRUCTIONS. CONTACT
YOUR INSTALLER FOR REPLACEMENT BATTERIES.
When installed as directed, this product conforms to the standards
set by Standards Australia on behalf of the Australian
Communications Authority (ACA)
