HiRO H50188 Guida rapida

HiRO H50188 WLAN ADSL2+ Router Configuration

Before configuring, pls make sure phone cord is connected to DSL modem at Line jack, DSL modem Power on, connect PC with

enclosed ethernet cable to any of the port in the back and make sure the correspond port LED is blinking.

1. Please insert the supplied CD into your CD-ROM drive.

2. The CD should auto-start, displaying the window shown in below. If your CD does not start automatically, go to Windows

Explorer, Select your CD drive and double click “autorun.exe”.

3. To configure the device, please click “Easy Configuration”.

4. Enter the VPI, VCI, Username and Password your ISP (Internet Services Provider) provided, and Protocol mode. Then press

“Next”.

1 of 8

5. Please enter the “ESSID” and Wireless “Default Channel” if you want to change (the default settings Network= Enable,

ESSID = RT2561_6, Default Channel=6).

6. Choose the Encryption type if necessary, as Off – No Encryption (Default) / 64 Bit Encryption / 128 Bit Encryption / Wi-Fi

Protected Access (TKIP) / Wi-Fi Protected Access2 (AES-CCMP) and WPA Mixed Mode. For example, you choose the WPA

Mixed Mode type and configure Passphrase.

7. Please click “Setup” button, when the procedure is completed, it will start to configure the device for a while.

2 of 8

8. Now, checking WLAN ADSL 2+ Router hardware connection, ADSL2+ settings, WLAN settings, and ADSL2+ Line

connection status.

9. Easy setup configuration completed. Click on " Exit " to exit this program.

3 of 8

10. Click on " Exit " to exit this program.

11. Now, the WLAN ADSL2+ Router has been configured completely, and suitable for Wireless and Internet Connections.

Pls open up a browser and see if you are able to connect online.

If not, pls proceed with the following

Accessing WLAN ADSL2+ Router Web Configuration

Step 1. Make sure your WLAN ADSL2+ Router is properly connected

Step 2. Prepare your computer/computer network to connect to the Router

Step 3. Launch your web browser.

4 of 8

Step 4. Type “192.168.1.1”.

Step 5. An Enter Network Password window displays. Enter the user name (“admin” is the default), password (“1234” is the

default) and click OK.

Step 6. You should now see the Site Map screen.

Quick Start Guide

You can use “Quick Start” to setup the router as follows, and the router will connect to the Internet via ADSL line.

Click “Quick Start” to get into the quick setup procedures.

Click “RUN WIZARD” to start up this procedure.

5 of 8

Step 1 – Please click “Next” to setup your new administrator's password.

Step 2 – Please click “Next” to setup your time zone.

Step 3 – Please click “Next” to setup your Internet connection type. You can have this information from your Internet Service

Provider.

Most commonly are PPPoE/PPPoA for CenturyLink Users

6 of 8

Step 4 - Enter the connection information provided by your ISP and click “Next”.

Step 5 - Enter the connection information provided by your ISP and click “Next”.

Step 6 – Please click “CLOSE” to finish Quick Start.

7 of 8

Step 7. Now, the WLAN ADSL2+ Router has been configured completely, and suitable for Wireless and Internet Connections.

Pls open up a browser and see if you are able to connect online.

If not, pls contact us for tech support.

8 of 8

Indice

Altri manuali HiRO Router di rete

HiRO

HiRO H50226 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza