Hisense YJE-C01T Manuale tecnico
Thank you very much for purchasing this Air Conditioner. Please
read this carefully before installing use and installation instructions
and using this appliance.And keep this manual for future reference.
YJE-C01T(E)
Welcome to use our product!
Thanks for trusting us.
Please read this manual carefully before installation!
Keep it properly for future use after installation!
APPLICATION MODEL
确定
ZONE
CONTENTS
fety Precautions ----------------------------------------------------------------1Sa
1.Important notice -------------------------------------------1
2.Checking product ------------------------------------------1
3.Safety summary -------------------------------------------2
System Introduction--------------------------------------------------------------3
Central Controller Introduction(Part name)-------------------4
Introduction to Parts of Central Controller ------------------------4
Liquid Crystal Display Screen ----------------------------------6
Central Control---------------------------------------------------------------------7
Simple Operation------------------------------------------------------------------9
Function Set------------------------------------------------------------------------1 1
Cl oc k- -- -- -- -- -- -- -- -- -- -- -- -- -- -- ------------------11
Button Locked -----------------------------------------------11
Simple TIMER ON --------------------------------------------12
Simple TIMER OFF--------------------------------------------13
Weekly Timer -----------------------------------------------14
Other Functions------------------------------------------------------------------16
TEMP. Display Setting ---------------------------------------16
Buzzer Indicator Selection --------------------------------------16
Backlight Selection-------------------------------------16
Maintenance, Troubleshooting and After-Sales Service---------------17
Installation Instructions----------------------------------------------------------18
Safety Precautions
1. Important notice
2. Checking product
● We pursue a policy of continuing improvement in design and performance
of products. The right is therefore reserved to vary specifications without notice.
● We cannot anticipate every possible circumstance that might involve a
potential hazard.
● No part of this manual can be reproduced without written permission.
● Signal words (DANGER, WARNING and CAUTION) are used to identify
levels of hazard seriousness. Definitions for identifying hazard levels are provided
below with their respective signal words.
Useful information for operation and/or maintenance.
●Upon receiving this product, inspect it for any shipping damage .
Claims for damage, either apparent or concealed, should be filed immediately with the
shipping company.
●Check accessories are all included with the unit according to the accessories list.
●Check the model number,electrical characteristics (power supply ,voltage and
frequency) and accessories to determine if they are correct.
The standard utilization of the unit shall be explained in this manual.
Therefore, the utilization of the unit other than those indicated in this manual is not
recommended.
●Follow local codes and regulations when installing it.
Please contact your local agent, as the occasion arises.●
！
！
！
●If you have any questions, contact your distributor or dealer .
● This manual should be considered as a permanent part of the air conditioning equipment
and should remain with the air conditioning equipment.
Immediate hazards which WILL result in severe
personal injury or death.
Hazards or unsafe practices which COULD result in severe
personal injury or death.
Hazards or unsafe practices which COULD result in minor
personal injury or product or property damage.
:
:
:
1
Our company disclaim all responsibility for changing the equipment without our
company's written consent.
●Installation and maintenance should be left to dealer or another professional.
:
●Installation should be left to the dealer or another professional person.
Improper installation may cause water leakage, electrical shock, or fire..
●Perform the installation correctly referring to the installation manual.
Incorrect installation could cause a personal injury due to fire, electric shock.
●Do not splash water on the appliance and do not touch it with wet hand .
These products are equipped with electrical components , splashing water could cause serious
electric shock or short-circuit.
●Must not touch or regulate safety device in the appliance.Otherwise serious accident may occur.
●Please be sure to cut off the main power supply before opening the panel to repair.
●Please use specify specifications cable.Firmly connected to the connection part of wire terminals ,
and avoid being shell. Do not apply wire stress to these parts. Otherwise it will cause fever or
fire,etc.
●Install the appliance on the base that can support its weight. Otherwise it may cause injury in the event
the appliance falls off the base.
●Connect with the electric supply after installation and check electric leakage.
●Avoid the following places for installation where appliance trouble is liable to occur.
·Places with an oily or or ambient.acidic, alkaline
·Places where sulfide gas occurs such as hot springs.
·Places with a flammable gas.
·Salty places such as seaside .
·Places with high temperature or flames,may lead to heat or fire.
·Where there is high-frequency or wireless equipment. It will cause interference .
Moisture or water flooding place. Once the water enters the inside of the remote control,
electric shock or electronic parts failure may occur.
●Do not install the appliance or connect the wires before reading the manual.
3. Safety summary
2
！
！
●Prohibit within the scope of 1 meter of the appliance using spray,such as pesticides,
paint, hair gel or other toxic gases.
●If the ELB(Electric Leakage Break) or fuse trouble is liable to occur,please consult local service shop.
●Installation and wring work should be perform according to the manual.
Otherwise electric shock or fire may occur.
●Do not ride or place the object that with no relation with the appliance on the unit.
●Protect the wires, electrical parts, etc. from rats or other small animals. If not protected, rats may gnaw
at unprotected parts and at the worst, a fire will occur.
●Firmly connect wires. Excessive force may cause fire.
●If the electric box or fuse break is liable to occur, please consult local service shop.
●Install indoor unit,outdoor unit ,wire remote controller or cables at least 3 meters away from high-
frequency source (such as medical appliance) .
● Do not trample products or place anything on it.
●Choose a place as described below to install wire remote controller in order to let TEM. sensor work normally.
A.A place where average temperature in the room can be detected.
B.A place where is not exposed to direct sunlight.
C.Avoid extremely hot or cold locations.
●Do not play with the wire remote controller.
！
Safety Precautions
Indoor unit
B-
B- B-
B-
B- B-
B- B- B- B-
A+
A+ A+
A+
A+ A+
A+ A+ A+ A+
RS485 shielded twisted pairs
(with polarity, A+ B-)
Rs485 shielded twisted pairs
(with polarity, A+ B-)
Indoor unit
Wired
controller
Wired
controller
Indoor unit
Wired
controller
220V ~/50Hz Indoor unit
N
GND
L
Wired
controller
··· ···
··· ···
RS485 shielded twisted pairs
(with polarity, A+ B-)
RS485 shielded twisted pairs
(with polarity, A+ B-)
Central box Central box Central box Central box
Indoor unit
Indoor unit
Indoor unit Indoor unit 220V ~/50Hz
N
GND
L
··· ···
··· ···
The central controller is an optional control component for users to monitor and control
operation of air conditioner in a centralized way.
The central controller can be used for unified management of the air conditioners in the
group/zone, querying and displaying on LCD the state of the main functions of the air
conditioner, weekly timer/simple timer setting or querying by keypad entry or setting of
main functions of air conditioner.
Communicate with the indoor unit in the central control network
It can communicate with the wired controller/indoor unit through RS485 communication
bus (shielded twisted pairs with polarity (A+ B-)). The indoor unit can be controlled centrally
or locally by using the wired controller, or centrally controlled by using converter (to be
purchased by users separately).
System Introduction
Control Diagram
1. Centrally or locally controlling the air conditioner using wired controller
2. Centrally controlling the air conditioner using converter board
3
Central controller
communication line
Central controller
communication line
Central controller
communication line
Central controller
communication line
Indoor unit
connection line
Central box
connection line
Central controller
power line
Central controller
power line
Notes:
1. The central box needs to be purchased by users separately.
2. The wired controller/central box on either end of the central
control system must be provided with terminal-matched resistor.
See the installation instructions for the wired controller/central box
for more details.
Introduction to Parts of Central Controller
4
Central Controller Introduction(Part Name)
2
10
13
11
12
1
3
4
7
8
9
5
6
ZONE
ON/OFF BUTTON
The appliance will be started when you press this button and be stopped
when you press this button again.
RUN INDICATOR
Indicates that the appliance is on.
MODE BUTTON
Press this button to select the operation mode.
FAN BUTTON
Used to select desired fan speed in sequence low-medium-high-auto-low.
SWING BUTTON (invalid for models without louver)
Used to stop or start adjustment louver swinging and set the desired airflow
direction.
TIMER/CLOCK BUTTON
Used to set timer on/off and clock time.
ZONE BUTTON
Used to set the group/zone.
ENTER BUTTON
Used to confirm settings.
CANCEL BUTTON
Used to cancel settings.
ADD.FUNC. BUTTON(Only valid for models with addition function module)
Used to set functions of air purge, hot water, ventilation (fresh air), and
electric heater.
INCREASE SETTING BUTTON
Used to raise the set temperature.Settings can be raised in a setting state.
DECREASE SETTING BUTTON
Used to lower the set temperature;Settings can be lowered in a setting state.
LIQUID CRYSTAL DISPLAY (LCD) SCREEN
Used to display the icons of set functions.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
5
Central Controller Introduction(Part Name)
LCD Screen
Notes:
1. Heating and electric heating functions are not available for cooling only models.
2. Air direction, filter clean, hot water, floor heater, ventilation (fresh air), air purge, and electric
heating functions are only effective for dedicated models, please refer to the operation manual
of specific model for details.
3. Error and maintenance, address setting, and zone setting functions should be set by the
professional for installation and maintenance.
6
Cooling Mode
Group Indicator
Relative Moisture
Zone/Unit Indicator
Locked Indicator
Fahrenheit Temperature
Hot Water
Electric Heater
Ventilation
Sleep Mode
Group/Zone No.
Error Indicator
Clock
Fan Speed
Left/Right Air Direction Indicator
Up/Down Air Direction Indicator
Day of Week
Week Indicator
Centigrade Temperature
Air Purge
Filter Clean
Dry Mode
Fan-only Mode
Heating Mode
Timer Indicator
Holiday Indicator
Date
Timer ON Indicator
Timer OFF Indicator
Daylight Saving Time Indicator
Floor Heater
Fan
Hot Water TEMP.
Room TEMP.
Central Controller Introduction(Part Name)
ADD. FU NC.
TIMER /CL OCK
CANCE L
SWING
FAN
ENTER
ON/OF F
MODE
ZONE
Before central control, group/zone settings must be carried out.
Group setting
If the centralized controller at the next higher level is used,
group setting needs to be carried out. The group number is
only effective for the centralized controller.
All conditioners in the central control network can be
classified into a range of group 1 to group 16.
Setting method:
Hold down “ADD. FUNC.” Button under shutdown state for 3
seconds to enter into group setting, and “GROUP” indicator
and group number blink. Press “ ” or “ '' to select the
group number. Press “ENTER” button to confirm the set
group number, press “CANCEL” button to cancel.
Zone setting
In a central control network, a maximum of 16 zones can be
set. The same unit can be classified into different zones. A
maximum of 16 air conditioners can be set in one zone.
1. Hold down “ZONE” button for 3 seconds to enter into zone
setting, and the zone number blinks. Press “ ” or “ '' to
select the zone number. Press “ENTER” button to enter into
setting of this zone.
2. Press “ ” or “ '' to select the air conditioner address
numbers from 1 to 16, and the number blinks. Press
“ENTER” button to confirm the selected number which is
underlined. Press “CANCEL” button to cancel.
3. Press “ZONE” button to enter into setting of the next zone.
A maximum of 16 zones can be set.
4. Press “ZONE” button again to exit the zone setting.
Group indicator
Group
number
ADD. FU NC.
TIMER /CL OCK
CANCE L
SWING
FAN
ENTER
ON/OF F
MODE
ZONE
1
2
3
3
Zone
number
Air conditioner
address
Zone selection
Unit selection
Setting completed
7
1. Group Control Mode (for the control of all conditioners in the central control network)
To control the air conditioners in the group in a unified manner.
2. Zone Control Mode
To control the air conditioners in the zone in a unified manner.
Central Control
Operation Modes of Central Controller
Group control (full control)
1. After entering the group control mode, you can perform as
follows:
Press “ZONE” button repeatedly until the group number and
addresses of all air conditioners in the group are displayed
on the central controller.
As shown in the right figure, the group number is 1, and there
are 16 air conditioners in this group.
2. Unified function setting can be performed by other buttons
(for detail description, please refer to instructions for specific
operation procedure).
Sub-zone control
1. After entering the sub-zone control mode, you can perform
as follows:
Press “ZONE” button repeatedly until the number of the zone
to be controlled and addresses of all air conditioners in the
zone are displayed.
As shown in the right figure, the zone number is 1, and there
are No.1, 2, and 3 air conditioners in this zone.
2. Function setting can be performed by other buttons (for
detail description, please refer to instructions for specific
operation procedure).
Special notes:
1. If no zone is set, only the group number will be displayed.
2. In the zone control mode, you can press “CANCEL” button
to enter the group control mode.
Monitoring
After the central controller is started, the LCD on the central
controller displays the operating state of the air conditioners
in the network in turn if no other operation is carried out.
Full unified control
Sub-zone control
8
Central Control
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Hisense Telecomando
Hisense
Hisense W9HBRCB0005 Manuale utente
Hisense
Hisense ERF2A60 Manuale utente
Hisense
Hisense YXE-C02U Manuale tecnico
Hisense
Hisense GoClick HT005E Manuale utente
Hisense
Hisense L1-04 Manuale utente
Hisense
Hisense HYE-W01 Manuale utente
Hisense
Hisense BR0013 Manuale utente
Hisense
Hisense J1-91 Manuale utente
Hisense
Hisense 32K26 Manuale operativo
Hisense
Hisense BRCB0006 Manuale utente
