Hisense HK560M Manuale utente
2
Safety Notices Before Installation or Use
☆ It is required grounded well and the supply voltage shall be stable, and you must confirm that
the voltage of the outlet provides shall be in line with the voltage marked on the label of the
unit.
☆ Be sure not to sprinkle any liquid or fall any object into the unit.
☆ Be sure not to keep heavy, strenuous movement, shake & heavy strike away from the POS.
☆ Do not switch on or off the host frequently, because it is easy to result in damage on the
machine.
☆ Be sure not to unplug or plug in any live part or external device when they are in energized
state, and the connecting cables of the POS between parts shall be connected securely.
☆ Be sure neither to lengthen cable nor to replace parts at your will, if you have any demand,
please contact with the reseller.
☆ The unit shall be used under dry, ventilated & clean environment away from sunlight. Avoid to
making the air vent of the host machine blocked or covered
☆ If any liquid sprinkles or any sundry falls into the unit, please shut it down immediately & switch
off power supply, take batteries down, dry the liquid or remove the sundry. If you take the
batteries down, you shall reset CMOS.
☆ In case of safety fault, such as peculiar smell, abnormal sound, leakage and other faults, you
must switch off the power supply at once and then contact with reseller.
☆ When inserting USB flash or disk, you shall kill virus to prevent the host machine from virus.
☆ The RJ11 port at the back of the host is connected with the cash drawer, as it is not a
communication port, users shall not use the port for dial-up networking.
☆ The product is a Level A one, it may cause radio interference in living environment. In such case,
users may need to take practical & feasible measures against the interference.
☆ When the POS is not in use, you shall switch off power supply.
3
The manufacturer has the right to modify the contents of the manual without prior notice!
Product standard NO：Q/0202 RSR527
Product standard Name: POS device
1. Applied range
The HK560M terminal adopt open operating system, flexible component structure and standard peripherals.
The products are suitable for the commercial enterprises, such as restaurants, supermarkets, and convenience
stores to Internet –connected use or stand-alone use. The main components are standard parts, so the quality of
the products is reliable, the system is easy to upgrade and the components are conveniently and easily maintained.
Reasonable price ratio makes it more competitive than similar products.
Specification ：
Item Description
Model HK560M
System
CPU Intel Celeron 3965U, Dual core CPU, clock speed 2.2GHz
Intel Skylake Core I3-6100U, Dual core CPU, clock speed 2.3GHz
Intel Skylake Core I5-6200U, Dual core CPU, clock speed 2.3GHz
Memory DDR4 2133Mhz ,4G, up to 16GB
Storage Flash Memory 3D NAND SSD,64GB up to 256GB
LCD Touch Panel
LCD Size 15.6 inch
Resolution 1920×1080
Touch Screen capacitive true flat touch
Serial Ports 3* RJ48 COM(COM1-3); COM2 COM3 voltage is adjustable
USB 4* USB 2.0(3* on IO panel, 1*under side cover )
1*USB3.0 (on IO panel)
Powered USB 1* USB 2.0 ,24V, on IO panel
Warning:
1. Absolute Ratings of Environment：
Operating Temperature：0～40℃
Operating Humidity：10%～85%RH
Storage Temperature：-10～50℃
Storage Humidity：10%～90%RH
2. Main plug on the power supply was used as disconnected device. The socket
-outlet shall be installed near the equipment and shall be easily accessible
3. If any damage to the power supply or the equipment, please contact local
service person for help.
4. Static may damage to the integrated circuit in the host machine.
5. If a replaced battery is not right, this may cause explosion or serious
damage. Must replace the same type of batteries or similar ones recommended
by the manufacturer
6. Used only with attached AC/DC power supply.
4
I/O Ports LAN 1 * RJ-45 (100M/1000Mbps Gigabit LAN)
HDMI 1*HDMI Port
Audio 1 * Line-out
Cash Drawer 1 * RJ-11 for cash drawer
Power Power Adapter Adapter (DC 24V, 2.5A)(Standard)
Adapter (DC 24V, 5A) (optional)
Peripheral
VFD 2*20 characters
Second Display 15.6 inch (touch/non-touch)
12.5 inch(touch/non-touch)
10.1inch(touch/non-touch)
Printer Separate 80MM thermal printer
Fingerprint reader HID fingerprint reader
MSR card reader 3 Tracks
RFID card reader RFID (Supports MIFARE one and MIFARE CPU card)
Operating system Windows7/posready7/windows8.1/windows10/linux
4. Device Assembly and disassembly
1). Unscrew the two screw shown to remove the back shell of the base.
2).After removing the screw, pull at the back shell of the base according to the picture shows, and remove the back
shell of the base.
5
3).Remove the two connectors shown in the picture and protect them with the tape according to the picture shows
(to prevent the connector from being pulled out in the process of dismantling and threading);
4).Rotate the main screen and the secondary screen : to the vertical angle, remove the three screws of the main
screen hinge and the second screen hinge respectively, and carefully pass the screen line through the line hole.
Separate the main and auxiliary screen from the base respectively.
6
5).Remove the hinges of the host: Remove four screws according to the picture shows. Remove the hinges of the
host and the hinges cover of the host separately.
6).Remove the extended interface cover: pull the expanded interface cover outward at the notch according to the
picture shows, and remove it.
7. remove the hard drive, unscrew the hard drive fixing screw, then remove the hard drive as arrow
direction show in the picture below.
8.remove the host back cover, remove the screws of hinge cover(4 pcs, show as ① ) and screws of
back cover(4 pcs, show as ② ), then remove the back cover ,and then you may replace or
maintenance the mainboard.
7
5. Environmental requirements
Type State
Environmental
Voltage AC 100V-240V 50-60Hz Bipolar
Temperature 5℃ - 40℃
Optimal 40% - 90%
6. Size specification
Single screen，Length×Width×Height：405*210*330；Flip Angle 0-45°
Double Screen，Length×Width×Height：405*250*370；
8
Main Flip Angle 0-45°，Second screen Flip Angle 0-30°
High position +printer，Length×Width×Height：405*250*420
Self-service，Length×Width×Height：230*250*450
7. Open the box and check.
1) Before opening the box, check whether the box is in good condition, and whether there is any obvious
damage.
2) The equipment must be installed by technical service person or distributors.
Operation
1) Switching Instructions：
Start-up: When the adapter is connected, hold down the switch button on the right back side of the
bottom of the machine for about 3 seconds. When the screen is on and the button indicator light is on, the
startup can be realized.
Shutdown: Press the switch button on the right back side of the bottom of the machine for about 3
seconds, and operate according to the screen prompt, which can realize shutdown and restart functions.
3) Swipe magnetic cards：
9
When swiping the card, the machine should be placed on a hard horizontal plane.
Please swipe the magnetic strip of the magnetic strip card inward from the swipe slot.
The process of card swiping should be smooth and uniform.
4) Contactless card operation：
Contactless card induction zone is located behind the right side of the host (with the contactless mark
printed).
When need read contactless card, please place the card above the induction zone.
8. Printer operations
1) Printer Structure
10
2) Load and change paper introduction
a. Press the open button to open the paper bin cover, as shown below. If there are paper tubes in the paper
warehouse, please take them out.
b. Put the paper roll into the paper bin, pay attention to the correct direction of the paper roll.
c. Please take out a small amount of paper from the front of the roll and close the cover of the printer's
paper bin
Indice
Altri manuali Hisense Terminale touch
Hisense
Hisense HK316 Manuale utente
Hisense
Hisense HK560 Manuale utente
Hisense
Hisense HK900A Manuale utente
Hisense
Hisense HM518 Manuale utente
Hisense
Hisense HK560 Manuale utente
Hisense
Hisense HK716 Series Guida rapida alla configurazione
Hisense
Hisense HK950 Manuale utente
Hisense
Hisense HK870 Series Guida rapida alla configurazione
Hisense
Hisense HK800 SERIES Manuale utente
Hisense
Hisense HM626R Manuale utente
