Hitachi MP-WU8101W Manuale utente
1QM00971-1
LCD Projector
MP-WU8101W/MP-WU8101B
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this projector, read all the manuals for this
projector. Read Safety Guide rst. After reading the manuals, store them in a
safe place for future reference.
WARNING
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This entry warns of a risk of serious personal injury or even
death.
This entry warns of a risk of personal injury or physical damage.
Refer to the pages written following this symbol.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
•
HDMI
®
, HDMI High-Denition Multimedia Interface
®
and HDMI
®
logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other
countries.
•
PJLink trademark and logo are trademarks applied for registration
or are already registered in Japan, the United States of America and
other countries and areas.
• Blu-ray DiscTM and Blu-rayTM are trademarks of Blu-ray Disc Association.
• DICOM® is the registered trademark of the National Electrical Manufacturers Association
for its standards publications relating to digital communications of medical information.
• HDBaseTTM and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance.
•
DisplayPort
TM
is trademark owned by the Video Electronics Standards Association (VESA
®
) in
the United States and other countries.
All other trademarks are the properties of their respective owners.
NOTICE This entry notices of fear of causing trouble.
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may dier
from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
2QM00971-1
Contents
Introduction ............... 3
Features ......................3
Checking the contents of package
....3
Warnings, Cautions, and Notices .....4
Part names ...................16
Projector, Control panel and Indicators,
Ports, Remote control
Setting up ................20
Arrangement ..................2 2
Connecting with your devices .....2 6
Attaching the terminal cover ......3 5
Using the security bar and slot ....3 6
Connecting to a power supply .....3 7
Remote control ............ 39
Installing the batteries ...........3 9
Using the REMOTE ID function ...4 0
Changing the frequency of remote control signal
. . 4 0
About the remote control signal ...4 1
Power on/off ..............42
Turning on the power ...........4 2
Turning o the power ...........4 3
Operating ................44
Adjusting the volume ...............4 4
Temporarily turning o the screen and audio
. . 4 4
Selecting an input signal .........4 5
Selecting an aspect ratio .........4 6
Limiting OSD display
.............4 7
Adjusting the projector's elevator
....4 8
Adjusting the lens ..............4 9
Adjusting the zoom and focus,
Adjusting the lens position, Lens memory
Correcting the distortion .........5 2
Using the EDGE BLENDING features
. . 5 5
Using the magnify feature ........5 9
Temporarily freezing the screen ...6 0
Temporarily shading the screen ...6 0
PbyP (Picture by Picture) /
PinP (Picture in Picture) ...6 1
Using the menu function .........6 5
Indication in OSD, Menu items
EASY MENU. . . . . . . . . . . . . . . 68
PICTURE menu ............70
IMAGE menu ..............74
INPUT menu .............. 77
SETUP menu ..............83
AUDIO menu .............. 91
SCREEN menu............. 92
OPTION menu .............98
NETWORK menu ..........116
SECURITY menu ..........117
Maintenance .............124
Cleaning and replacing the air lter . 12 4
Inserting or replacing the
internal
clock battery
. .........12 6
Other care ...................12 7
Troubleshooting ..........129
Related messages ..............12 9
Regarding the indicator lamps ...13 1
Resetting all settings ...........13 6
Issues that may be easy to
be mistaken for machine defects
. . 13 7
Specications ............146
3QM00971-1
Introduction
Introduction
The projector provides you with the broad use by the following features.
ü The HDMITM/DisplayPortTM/HDBaseTTM ports can support various image
equipment which have digital interface to get clearer pictures on a screen.
ü The super bright light source and high quality optical system can fulll the
demands of professional uses.
ü Optional lens units and a wide range of the lens shift feature provide more
exibility in where you can install the projector.
ü The multiple I/O ports is believed to support any business scene.
ü HDCR and ACCENTUALIZER features are original image stabilizer for a
clearer image.
ü Equipped with an original contrast optimizer function to improve contrast
and vividness.
ü A DICOM® (“Digital Imaging and Communication in Medicine”) provides
simulation mode. This mode simulates the DICOM standard, which is a
standard applicable to digital communications in medicine.
ü COLOR MANAGEMENT corrects an image by dividing it into three-
dimensional space such as color phase, color saturation, and brightness.
Features
• Keep the original packing materials for future shipment. Use the
original packing materials when moving the projector. Remove the lens unit and
attach the lens hole cover when moving the projector.
NOTE
Checking the contents of package
See the Contents of package section in the User’s Manual (concise) which is a
book. Your projector should come with the items shown there. Consult your dealer
immediately if any items are missing.
►Keep small parts away from children and pets. Take care not
to put in the mouth. If swallowed, consult a physician immediately for emergency
treatment.
WARNING
4QM00971-1
Introduction
Warnings, Cautions, and Notices
►Never use the projector if a problem should occur.
• Otherwise it can cause re or electric shock.
• If any of the following abnormalities occur, urgently stop using the product and
unplug it from the power outlet:
-
The product is giving o smoke or strange smell, or making a strange sound.
- A foreign object or liquid has entered the product.
- The product was impacted by being dropped or hit.
- The product, or the power cord or cables connected is damaged.
• After making sure that the smoke or odor has stopped, contact your dealer.
•
The power outlet should be close to the projector and easily accessible. Never
repair the product by yourself because it is dangerous.
►Use special caution for children and pets.
• Incorrect handling could result in re, electrical shock, injury, burn or vision
problem.
• Keep the battery and small parts away from children and pets. Take care that
they should not swallow.
• Install the product away from children and pets. If swallowed, consult a
physician immediately for emergency treatment.
►Do not let any things or any liquids enter to the inside of the product.
• Penetration of liquids or foreign objects could result in re or electrical shock. If
ammable air or liquid goes into the projector, it may cause re or injury due to
explosion caused by catching re.
• Do not put anything wet, small, containing air or liquid around the projector. Do
not use aerosols or sprays to or around the product.
• To avoid penetration of foreign objects, do not put the projector into a case
or bag together with any thing except the accessories of the projector, signal
cables and connectors.
• If liquids or foreign object should enter the projector, immediately turn o the
power switch, disconnect the power plug from the power outlet and contact
your dealer.
WARNING
(continued on next page)
5QM00971-1
Introduction
Warnings, Cautions, and Notices (continued)
►Do not get the product wet.
• It could result in a re, an electric shock, and/or malfunction to the projector.
• Do not place the projector near water, such as in a bathroom, kitchen, or
poolside.
• Do not place the projector outdoors or by the window.
►Do not place the projector on an unstable surface. Install the projector in
a stable position. Do not give the projector any shock or impact.
• If the projector should be dropped and/or broken, it could result in an injury,
and continued use could result in re or electrical shock.
• If the projector is shocked, immediately turn o the power switch, disconnect
the power plug from the power outlet and contact your dealer.
• Remove all the attachments including the power cord and cables from the
projector when carrying the projector.
• Use the caster brakes placing the projector on a stand with casters.
• For special installation such as ceiling mounting, be sure to consult your dealer
beforehand.
• Install the projector in the way specied in "Setting up", "Arrangement", and
"Adjusting the projector's elevator".
• Do not put the projector on its side, front or rear position.
► Do not place the projector in the following place where oils or chemicals
are used:
- near the kitchen which oil smoke comes from
- oils such as machine oils or aromatic oils are used
- smoke or bubbles for a show or a performance are used
- solvents, medicines, or detergent volatiles or adheres
- corrosive gas is generated
Do not use adhesive such as threadlocker, lubricant and so on.
• Oils adhere to the product due to oil smoke, resulting in re, electrical shock, or
malfunction.
• Degradation of plastic harms the product, resulting in injury, re, electrical
shock, or malfunction due to falling from the ceiling, wall, or high mounted
position.
WARNING
(continued on next page)
6QM00971-1
Introduction
Warnings, Cautions, and Notices (continued)
►Never disassemble and modify.
• The product contains high voltage components and/or laser light-emitting part
beyond the scope of Class 1 (IEC60825-1). Modication and/or disassembly of
the product could result in re, electrical shock, or injury to eyes or skin.
•
Do not open or remove any portion of the product unless the manuals direct it.
• For internal maintenance, leave it to your dealer or their service personnel.
►Be cautious of high temperatures of the projector.
• High temperatures are generated when the light source is lit.
• Do not touch the USB wireless adapter while the projector is receiving AC
power.
• If combustibles or aerosol sprays are around the projector, it may cause re or
injury due to catching re or rupture.
• Do not install the projector near thermally conductive or ammable things.
• Do not touch around the exhaust vents during use or just after use, since it is
too hot.
►Never look through the lens or openings when the light source is on.
• A strong light is emitted when the projector’s power is on. Do not look into the
lens and the openings on the projector while the light source is on, since the
projection ray may cause a trouble on your eyes.
► When you turn o the projected image while the light source is on,
follow the specied procedure.
• If you wish to have a blank screen while the light source is on, use the BLANK
function.
• Keep any object away from concentrated projection light beam. Blocking the
beam by something causes high temperature and could result in re or smoke.
WARNING
(continued on next page)
7QM00971-1
Introduction
Warnings, Cautions, and Notices (continued)
►Use the accessory cable or a designated type cable for the connection.
• If you use a power cord or a signal cable that are not comply with the
specication, it causes re, electric shock, malfunction, or radio wave
interference.
• Only use the power cord that came with the projector.
• Consult your dealer to properly use connection cables or connectors other than
coming with the projector.
• The power cord that came with the projector is only for this projector. Do not
use it for other devices.
►Clean the power plug by using a soft and dry cloth.
• If dust or metal adheres to or around the AC (power terminal) of this projector
or the power plug, it may cause re or electric shock.
►Insert the power plug into a power outlet rmly.
• Use extra caution when connecting the power cord, as incorrect or faulty
connections may result in re and/or electrical shock.
• Incorrect power supply could result in re or electrical shock.
• Be sure to plug the power cord into an outlet that has specied voltage.
• Avoid using a loose, unsound outlet or contact failure.
• Do not distribute the power supply to multiple devices. It may overload the
outlet and connectors, loosen the connection, or result in re, electric shock or
other accidents.
►Be sure to connect with ground wire.
• Connect the ground terminal of AC inlet of this unit with the ground terminal
provided at the building using the correct power cord; otherwise, re or electric
shock can result.
• If you connect the ground wire to the outlet, it may cause re or electric shock.
WARNING
(continued on next page)
8QM00971-1
Introduction
Warnings, Cautions, and Notices (continued)
►Do not damage the power cord, cables, and connectors.
• If you keep using a damaged the power cord or cables, it can cause a re or
electrical shock.
• If it is damaged, consult your dealer to get a new one.
►Do not touch the power cord with a wet hand.
• It results in electric shock.
►Before cleaning, turn o and unplug the projector.
• Neglect could result in re or electrical shock.
• Before cleaning, turn o and unplug the projector.
• Take right care of the projector by following the manual.
►Be careful in handling the battery.
• Improper use may result in battery explosion, cracking or leakage, which could
result in re, injury and/or pollution of the surrounding environment. Children or
pets may swallow the battery because it is small.
• If swallowed, consult a physician immediately for emergency treatment.
• If you observe battery leakage, wipe out the leakage and then replace a
battery. If the leakage adheres to your body or clothes, rinse well with water
immediately. If it entered your eye, wash it with clean water immediately and
consult a physician.
• Be sure to use only the specied batteries.
• Do not allow the battery in a re or water. Avoid re or high-temperature
environment. Keep the battery in a dark, cool and dry place.
• Keep the battery away from children and pets.
• Obey the local laws on disposing a battery.
► Do not put anything on top of the projector or hang anything from the
projector.
• Placing anything on the projector could result in loss of balance or falling, and
cause an injury or damage.
• Do not attach nor place anything on the projector unless otherwise specied in
the manual.
WARNING
(continued on next page)
9QM00971-1
Introduction
Warnings, Cautions, and Notices (continued)
► Do not place the projector in a place where it can be hot nor block the
projector's ventilation openings.
• The projector may shut down automatically, or may malfunction due to high
internal temperature if it is placed in a place where it can be hot or ventilation
does not operate normally.
• The heat could have adverse inuence on the cabinet of the projector and
other parts.
• Place the projector in a cool place with sucient ventilation.
• Do not place the projector in direct sunlight or near hot objects such as heaters.
• Do not place the projector where the air from an air conditioner or similar unit
will blow on it directly.
• Do not put the projector or the accessories in a microwave oven.
• Do not stop up, block nor cover the projector's vent holes.
• Do not place anything around the projector that could be sucked in or stuck to
the projector's intake vents.
• Do not place the projector on carpet, cushions or bedding.
► Avoid placing the projector in smoky, humid, or dusty place, or in a place
where it can be aected by soil salinity.
• Accumulations of dust inside the projector result in re or malfunction.
• Do not place the projector near a smoky, humid or dusty place (ex. a smoking
space, a kitchen, a beach, etc.).
• Do not place the projector near humidiers. Especially for an ultrasonic
humidier, chlorine and minerals contained in tap water are atomized and could
be deposited in the projector causing image degradation or other problems.
• Do not place the projector outdoors.
CAUTION
(continued on next page)
10 QM00971-1
Introduction
Warnings, Cautions, and Notices (continued)
►Avoid Magnetism.
• Magnetic objects may cause interruption of the projector's internal mechanical
performance which may interfere with cooling fans speed or stopping, and may
cause the projector to completely shut down.
• The projector may shutdown automatically or may malfunction if its internal
temperature is too high.
• Avoid any magnetic contact that is not shielded or protected on or near the
projector itself.
► Unplug the projector from the power outlet if the projector is not being
used.
• Unplug the power cord for complete disconnection.
• If you leave the projector with the power cord connected to the outlet, it can
result in a re or an electric shock.
►Do not use the product during electrical storms.
• If the projector is used while a lightning strike occurs, it may result in re or
electric shock.
• If there is a possibility that a lightning strike occurs, stop using the product and
unplug it from the power outlet.
► The designated USB wireless adapter that is sold as an option is
required to use the wireless network function of this projector.
► Before connecting the projector to a network system, be sure to obtain
the consent of the administrator of the network.
• Some networks may have the excessive voltage. Do not connect the LAN port
to any network that might have the excessive voltage.
• You cannot connect this product directly to communication lines (including
public wireless LAN) of telecommunications carriers such as mobile
telecommunications companies, xed-line telecommunications companies, and
internet service providers. When you connect this product to the internet, be
sure to connect it via a router and so on.
CAUTION
(continued on next page)
Altri manuali per MP-WU8101W
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Hitachi Proiettore
Hitachi
Hitachi CP-X3030WN Manuale utente
Hitachi
Hitachi CP-X2510 series Manuale utente
Hitachi
Hitachi CP-WU8440 Manuale utente
Hitachi
Hitachi CP-X2530WN Manuale utente
Hitachi
Hitachi CP-X505W and Manuale utente
Hitachi
Hitachi CPX305 - XGA LCD Projector Istruzioni di installazione e manutenzione
Hitachi
Hitachi CP-WX3015WN Manuale utente
Hitachi
Hitachi LP-WU9100B Manuale utente
Hitachi
Hitachi PJ-TX100 Documento tecnico
Hitachi
Hitachi CP-RX61 series Manuale utente
Hitachi
Hitachi Innovate CP-RX78 Manuale utente
Hitachi
Hitachi CP-S318 series Manuale utente
Hitachi
Hitachi CP-D31N guide Manuale utente
Hitachi
Hitachi CP-A300N Manuale utente
Hitachi
Hitachi CP-X980W Manuale utente
Hitachi
Hitachi CP-SX635 - SXGA+ LCD Projector Manuale utente
Hitachi
Hitachi HCP-838X Manuale utente
Hitachi
Hitachi CP-WX3011N Documento tecnico
Hitachi
Hitachi CP-S210 series Manuale utente
Hitachi
Hitachi Innovate ED-A111 Manuale utente
