Hitachi KP-F80 Manuale utente
KP
-F80
Progressive Scan
B/W CCD Camera
Operation Guide
Table of Contents
KP-F80
1. General 1
･･･････････････････････････････････････････････
･･･････････････････････････････････････････
･･････････････････････････････････････････
････････････････････････････････････････････
･･･････････････････････････････････････････
･･････････････････････････････････････････
･･････････････････････････････････････････
････････････････････････････････････････
･････････････････････････････････････････
･･･････････････････････････････････････････････
･････････････････････････････････････････
････････････
2. Composition 1
3. Specifications 1
4. Adjustment 3
5. Timing chart 5
6. External view 9
7. External sync 10
8. Connect cables 11
9. Optical system 12
10. Optional 13
11. Notes to users 16
Attachment ：Spectral sensitivity characteristic 18
KP-F80
1
1. General
The Hitachi KP-F80 are a high performance self-contained black and white CCD camera suited
for a wide variety of general purpose and specialized applications. The charge coupled
device (CCD) imaging element is 1/3-inch size progressive scanning with independent readout
of all picture elements (pixels).
In addition to high resolution and sensitivity, a broad array of functions, including multi-step
electronic shutter, HD/VD external sync, frame on demand and many more contribute to
versatility that meets a wide range of needs.
The square pixel CCD also renders an image appropriate for image processing systems.
2. Composition
1) Black and white camera (With IR cut filter) 1
･････････
･･･････････････････････････････
2) Operation manual 1
3. Specifications
1) Imaging device 1/3 inch progressive scan interline CCD
Total pixels 1077(H)×788(V)
Effective pixels 1034(H)×779(V)
Pixel size 4.65(H)×4.65(v)µm
2) Sensing area 4.81(H)×3.62(V)mm
3) Scanning system Progressive scan
4) Hor. scanning frequency 23.622kHz
5) Vert. scanning frequency 29.83 Hz
6) Sync system Internal/external, automatic selection
7) External sync input HD & VD : 5V DC negative
Input impedance : 75Ωor High impedance
Frequency deviation : ±1%
3.Specifications
KP-F80
2
8) Video output 1.0 Vp-p, 75Ω, unbalanced
Video component : 0.7 Vp-p
Sync component : 0.3 Vp-p negative
9) Horizontal Resolution 800 TV lines
10) Signal to noise ratio 54 dB
11) Electronic shutter External switch settings for off
(standard exposure),
1/50000s to 1/250s
Factory setting is off.
12) Gamma correction 1
13) Gain control Manual gain control.
Factory setting is Minimum.
14) Frame on demand External switch.
Selectable One trigger, fixed shutter and Reset
control. (Partial scan : option)
Factory setting is off.
15) Power supply voltage 12 ±1 VDC
16) Power consumption Approx. 2.2 W
17) Ambient temperature and humidity
Operating -10 to 50℃RH less than 90 %
Storage -20 to 60℃RH less than 70 %
Caution: For continued stable operation, the camera should be used under 40℃or less when
it is used continuously for extended period of time.
18) Anti-vibration 98m/s2(10 to 60Hz, amplitude: 0.98mm constant,
60 to 200Hz, amplitude: variable)
(10 to 200Hz, sweep:1 min., XYZ, 30 min.)
19) Resistance to shock 686m/s2(Drop test, once each top, bottom,
left and right)
20) Dimensions 29(W)
×29(H) ×38.5(L)mm
21) Mass 55g approx.
4. Adjustment
KP-F80
3
HD/VD IN/OUT
OUT IN
IN .... External HD/VD Input
OUT.. Internal HD/VD Output
TERMINATION
HIGH 75ohm
INPUT IMPEDANCE
EXTERNAL HD AND
EXTERNAL VD
FRAME ON DEMAND
E.SHUTTER
SHUT
SCAN
MODE
H.TERM
V.TERM
ONE
TRIGGER
MODE FIXED
SHUTTER
TRIGGER
RESET
CONTROL
PARTIAL
SCAN
TRIGGER
(OPTION)
GAIN control
MIN MAX
1
2
3
4
5
6
7
8
9
0
Normal
1/250s
1/500s
1/1000s
1/2000s
1/4000s
1/10000s
1/50000s
4.Adjustment
KP-F80
4
VIDEO OUT/DC IN/SYNC CN
VIDEO OUTPUT
DC IN: DC12V(11 to 13V)
EXT.HD, EXT.VD and
Trigger input
External sync mode
ONE trigger Fixed shutter
HD/VD
Internal
sync
mode
PIN
NO.
1
2
3
4
5
6
7
8
9
10
11
12
GND
+12V
GND(Vout)
Vout
GND
-
-
GND
NC
WEN
-
GND
GND
+12V
GND(Vout)
Vout
GND(HD)
HD IN/OUT
VD IN/OUT
GND
NC
WEN
-
GND(VD)
GND
+12V
GND(Vout)
Vout
GND(HD)
HD IN/OUT
Trigger
GND
NC
WEN
-
GND(Trig)
GND
+12V
GND(Vout)
Vout
GND(HD)
HD IN/OUT
Trigger
GND
NC
WEN
-
GND(Trig)
GND
+12V
GND(Vout)
Vout
GND(HD)
HD IN/OUT
Trigger/VD
GND
NC
WEN
Trigger B
GND(Trig)
GND
+12V
GND(Vout)
Vout
GND(HD)
(HD IN/OUT)
Trigger
GND
NC
WEN
-
GND(Trig)
Reset control Partial(OPTION)
Frame on demand JU-F30
BNC
(GND)
(+12V)
GND
VIDEO1
(GND)
HD
VD
(GND)
VIDEO2
WEN
-
(GND)
5 Timing chart
KP-F80
5
94
5 40 164 29 3 5 1024 5 40
B1
B40
D1
D29
B1
B3
B1
B40
33.33nsec 1034
H BLK
246 (8.20us)
18
0.60us 60
2.00us 168
5.60us 1024
42.3us
1270
1077
clk=33.33nsec
KP-F80 CCD OUTPUT WAVE TIMING CHART
H Drive
CCD pixel and
Hregister array
CCD output
signal
Composit video
signal
H register
transfar stop
Optically
black Dummy
H register
Photosensing period
Output video period
5 Timing chart
KP-F80
6
11H9H4H
779
778
777
3
2
1
6
5
4
1
7
7
42
24
1H=42.33uS
11
10
9
8
7
6
5
4
3
2
2H
KP-F80 Timming chart
Vertical
Video out
V Drive
BLK
H Drive
CCD out
WEN out
5 Timing chart
KP-F80
7
Trigger pulse
V.SYNC
Video output
5Vp
p
Low: 0V
High: 5V
Trigger pulse
Integration time
(Shutter switch)
V.SYNC
Video output
5Vp
p
Low: 0V
High: 5V
ONE Trigger
Fixed Shutter
Trigger B pulse
V.SYNC
Video output
5Vp
p
Low: 0V
High: 5V
Reset control
Integration time
*1
Trigger pulse 3H~250ms
*1
*1Please
inquire.
Integration time
*1
2us approx.
2us approx.
2us approx.
KP-F80
Frame on demand function
TriggerBpulse........Asynchronous
Triggerpulse......LatchininternalHD
Triggerpulse........LatchininternalHD
Triggerpulse........Asynchronous
NOTE:Thelatchandnon-latchcanbechanged.
2us approx.
2us or more.
2us approx.
2us or more.
5 Timing chart
KP-F80
8
Trigger B pulse
V.SYNC
Video output
5Vpp
Low: 0V
High: 5V
Reset control
Integration time
*1
Trigger pulse 3H~250ms
*1
1/3s
approx.
Special function of reset control Trigger
The camera shifts to the output of a normal mode (continuous output) when Trigger B signal passes about
1/3 seconds in the state of High.
(The image is output by inputting the Trigger at the VD cycle for this period.)
It returns to the Trigger mode if Trigger B signal becomes Low.
However, after becoming Low Trigger B, the period of 50ms becomes a Trigger signal input prohibition
period.
Indice
Altri manuali Hitachi Telecamera di sicurezza
Hitachi
Hitachi HV-D20P Manuale utente
Hitachi
Hitachi KP-FM500WCL Manuale utente
Hitachi
Hitachi KP-M2A Manuale utente
Hitachi
Hitachi KP-F500PCL Manuale utente
Hitachi
Hitachi KP-F1 Manuale utente
Hitachi
Hitachi SICOLOR DIG K550 Manuale utente
Hitachi
Hitachi KP-DE500 Manuale utente
Hitachi
Hitachi DK-Z50 Manuale utente
Hitachi
Hitachi HV-D25 Manuale utente
Hitachi
Hitachi HV-F130SCL Manuale utente
Hitachi
Hitachi KP-F37 Manuale utente
Hitachi
Hitachi HV-D30 Manuale utente
Hitachi
Hitachi KP-FD30 Manuale utente
Hitachi
Hitachi KP-F500WCL Manuale utente
Hitachi
Hitachi KP-F500GV Manuale utente
Hitachi
Hitachi HV-F22F Manuale utente
Hitachi
Hitachi KP-D5010 Manuale utente
Hitachi
Hitachi VK-S454ER Manuale utente
Hitachi
Hitachi BE-IR20 Manuale utente
Hitachi
Hitachi KP-D20A Manuale utente
