Hitron CGN Manuale utente

Altri manuali per CGN

2

Altri manuali Hitron Modem

Manuali Modem popolari di altre marche

Davicom

Davicom DM562AP Manuale utente

EpiValley

EpiValley TATA indicom SXC-1080 Manuale utente

Zte

Zte WiMAX Manuale utente

Intelimax

Intelimax MA-2060 Manuale utente

SMC Networks

SMC Networks D3CM1604V Manuale per l'uso e la cura

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuale utente

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuale utente

Samsung

Samsung AceLink SAM-335A Manuale utente

Enfora

Enfora Enabler-G Guida rapida alla configurazione

iRZ

iRZ ATM2-232 Manuale utente

Zhone

Zhone 6310 Manuale utente

Paradyne

Paradyne Hotwire 7976 Manuale utente

US Robotics

US Robotics 3453C Manuale utente

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuale utente

Zte

Zte MF823 Manuale utente

Four-Faith

Four-Faith F1403 Manuale utente

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuale utente

Gemtek

Gemtek WiMAX WIXFBR-103 Manuale utente

Weave Cable Modem Setup Guide

Revised: 2019-07-31

These instructions detail how to install a Hitron CGN cable modem and router with Weave's

network. Please contact Weave Support at any point in time, if the instructions do not make

sense or you are not getting the same results as the pictures.

Please note, you may have received your modem but your internet will not work until Weave

Networks has correctly connected you to the network. Please make sure you have received an

email or a call from a Weave staff member saying your internet is now connected before

attempting the below.

Step 1

Unbox the Hitron CGN modem (or if you have your own modem). It should look like the picture

above.

Step 2

Take the coax cable, it should look like the

cable pictured.

www.weavenetworks.com 1-587-415-2900 support@weavenetworks.com Page 1 / 4

Weave Cable Modem Setup Guide

Revised: 2019-07-31

Step 3

Plug one end of the coax cable into the wall socket.

Make sure to screw the cable in tight. You will find these

normally in your living room or bedrooms where a TV can

be connected.

Step 4

Plug the other end of the coax cable into the back

of the modem. Make sure to screw the cable in tight.

www.weavenetworks.com 1-587-415-2900 [email protected] Page 2 / 4

Weave Cable Modem Setup Guide

Revised: 2019-07-31

Step 5

Power on the modem. You can achieve this

by connecting the power into the modem

and then connect it to a wall power socket.

Step 6

Wait up to 5 minutes, then the lights on the modem should now show the following:

Power

Solid Green

Uplink (Up arrow house)

Solid Green or Blue

Downlink (Down arrow house)

Solid Green or Blue

Internet (@)

Solid Green

LAN (Computer symbol)

Black (Not on)

USB

Black (Not on)

WPS

Black (Not on)

Wireless

Solid Green or Blinking

www.weavenetworks.com 1-587-415-2900 [email protected] Page 3 / 4

Weave Cable Modem Setup Guide

Revised: 2019-07-31

Step 7

You should now able to connect your computer to

one of the yellow ports on the back of your

modem and have internet access to your

computer.

Step 8

You have now successfully set up your internet.

You should now be able to connect to the wireless using a phone or laptop and get internet

access. The WIFI username and password is on the back of the router. Please call Weave

Support if you can't.

www.weavenetworks.com 1-587-415-2900 [email protected] Page 4 / 4