HK Instruments DPT-2W- 100-R2 Manuale utente

DPT-2W - 2-wire differential pressure transmitter

USER GUIDE

Published: 31.05.2023 2 (11)

Contents

1 Introduction........................................................................................................... 3

1.1 About this user guide.....................................................................................................................................3

1.2 Intended use...................................................................................................................................................3

1.3 Applications.....................................................................................................................................................3

2 Description of the product.................................................................................. 4

2.1 Overview of the main parts............................................................................................................................4

2.2 Technical specifications..................................................................................................................................4

2.3 Dimensions..................................................................................................................................................... 5

3 Safety precautions................................................................................................6

4 Commissioning..................................................................................................... 7

4.1 Mounting the product......................................................................................................................................7

4.2 Measuring range selection.............................................................................................................................8

4.3 Selecting response time.................................................................................................................................8

4.4 Wiring..............................................................................................................................................................9

4.5 Zeroing............................................................................................................................................................9

5 Disposal...............................................................................................................10

6 Warranty policy...................................................................................................11

Information is subject to change without prior notice. EN - 104.004.008ug

Published: 31.05.2023 3 (11)

1 Introduction

Thank you for choosing an HK Instruments DPT series differential pressure transmitter. The DPT series is intended

for use in commercial environments. The DPT-2W series differential pressure transmitter provides a 4...20 mA loop

output.

All DPT-2W differential pressure transmitters are available with display.

1.1 About this user guide

This user guide contains important information about the installation, wiring, configuration and use of the product.

Read this guide carefully before you install the product, connect the wires, or operate the product. Make sure that you

fully understand all instructions before you start work. If you are not sure what the instructions mean, contact the seller

or the manufacturer.

Follow all instructions in this user guide carefully. Always obey the applicable local rules and regulations.

The original instructions were written in English. If there are differences between the English instructions and the

translations, refer to the English instructions.

If you find a mistake in the English instructions or in the translations, please send the details to the manufacturer.

1.2 Intended use

The DPT-2W differential pressure transmitter is intended to be used to measure differential pressure in ventilation

ducts.

These transmitters are intended to be connected to building automation systems in the HVAC/R industry.

1.3 Applications

DPT-2W devices are commonly used in HVAC/R systems for:

• fan, blower and filter monitoring

• pressure and flow monitoring

• valve and damper control

• pressure monitoring in cleanrooms

Information is subject to change without prior notice. EN - 104.004.008ug

Published: 31.05.2023 4 (11)

2 Description of the product

This section introduces the main parts of the product and contains the technical specifications.

2.1 Overview of the main parts

A Display connectors D Pressure range selection jumpers

B Zeroing button E Pressure sensor

C Indicator light F Wiring terminal

2.2 Technical specifications

Property Value

Supply 10...35 Vdc

Pressure measurement ranges

-250 models ±25 / ±50 / ±100 / ±150 / 0...25 / 0...50 / 0...100 / *0...250 Pa

-2500 models ±100 / 0...100 / 0...250 / 0...500 / 0...1000 / 0...1500 / 0...2000 / *0...2500 Pa

-7000 models 0...750 / 0...1000 / 0...1250 / 0...2250 / 0...2500 / 0...3750 / 0...5000 / *0...7000 Pa

Accuracy (temperature compensated) ±1.5 % + 2 Pa from value

Overpressure

Proof pressure 25 kPa

Burst pressure 30 kPa

Long term stability

-250 and -2500 models typ. -8…8 Pa / year

-7000 models typ. -22…22 Pa / year

Response time *0.8 s / 4 s

Zeroing Manually by push button

Sensor MEMS, no flow-through

Output

Signal 4...20 mA, >20 Ω

Accuracy typ. ±0.04 mA at 25 °C, load 100 Ω

Display (-D models) 3 1/2 digit display

Operating conditions

Information is subject to change without prior notice. EN - 104.004.008ug

Published: 31.05.2023 5 (11)

Property Value

Temperature -10...50 °C

Humidity 0...95 %rH (non-condensing)

Wire 0.2...1.5 mm2(24...16 AWG)

Housing

Materials ABS and PC plastic

Protection class IP54

Cable gland M16

Mounting 2 x Ø4.3 mm screw holes, one slotted

Dimensions (w x h x d) 90 x 95 x 36 mm

Weight 150 g

Storage temperature -40...70 °C

Conformance CE UKCA

EMC 2014/30/EU S.I. 2016 No. 1091

RoHS 2011/65/EU S.I. 2012 No. 3032

WEEE 2012/19/EU S.I. 2013 No. 3113

* factory setting

2.3 Dimensions

Ø4.3

Information is subject to change without prior notice. EN - 104.004.008ug

Published: 31.05.2023 6 (11)

3 Safety precautions

The product is developed, manufactured and tested according to high quality standards. However, instructions for

safe use shall be taken account when installing, using or disposing the product or parts of product.

Read this user guide carefully before commissioning, using or servicing this device. To avoid any kind of damage to

people or property, follow the instructions carefully. HK Instruments is not liable for any hazards or damages to people

or property which are caused by ignoring the using or installation instructions.

To avoid electrical shock or damage to equipment, disconnect power before installing or servicing the product. Use

only a proper wiring rated for the full operating voltage and maximum current in the system even in the event of a

fault.

To avoid potential fire and/or explosion, do not use the product in potentially flammable or explosive atmosphere.

The product condition must be checked before installation. Do not drop the product or use excessive force during

installation. Do not use the product if any damages are visible.

After installation the product will be part of a system whose specifications and performance characteristics are not

designed or controlled by HK Instruments. Refer to national and local authorities to ensure that the installation is

functional and safe.

The product should only be used in professionally designed applications. Unauthorised modifications are not allowed.

The product must not be used in relation with any equipment that in case of a failure may threaten, directly or

indirectly, human health or life or result in danger to human beings, animals or property.

In this document, there are different kind of warnings and notes. The warning and note types are defined in the

following table.

Sign Description

WARNING: The warning symbol indicates a potentially hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION: The caution symbol indicates a potentially hazardous situation which, if not avoided, could result

in minor or moderate injury.

Important: The important symbol indicates a potentially hazardous situation which, if not avoided, could

result in damage to the device or property.

Note: The note symbol indicates a useful tip or a recommended way to complete a task. These notes

also provide information that is useful but not critical to the user.

Information is subject to change without prior notice. EN - 104.004.008ug

Published: 31.05.2023 7 (11)

4 Commissioning

4.1 Mounting the product

WARNING: Handle the product with care. Dropping the product may cause internal damage and unwanted

functions in the connected system.

1. Check that the product is not damaged during transportation.

2. Select the mounting location.

CAUTION: Place the product outside the reach of children and animals.

Important: The product may only be installed in a location where the ambient conditions meet the

operating condition requirements.

Operating conditions

Temperature -20...50 °C

Humidity 0...95 %rH (non condensing)

3. Mount the product on flat surface using the mounting points.

A. Mounting point

Mounting orientation:

Select the mounting screws according to the mounting surface. The maximum screw diameter is 4.3 mm.

Important: Don't use excessive force when tightening the mounting screws.

4. Install the measuring hoses carefully so that the hoses don't bend too tightly.

Too tight curves may prevent the air flow to the sensor.

Information is subject to change without prior notice. EN - 104.004.008ug

Published: 31.05.2023 8 (11)

4.2 Measuring range selection

Settings for -250 models

±25 ±50 ±100 ±150 0...25 0...50 0...100 1) 0...250

Jumper 1

Jumper 2

Jumper 3

Settings for -2500 models

±100 0..100 0...250 0...500 0...1000 0...1500 0...2000 1) 0...2500

Jumper 1

Jumper 2

Jumper 3

Settings for -7000 models

0..750 0..1000 0...1250 0...2250 0...2500 0...3750 0...5000 1) 0...7000

Jumper 1

Jumper 2

Jumper 3

1) Factory setting

4.3 Selecting response time

The response time affects how fast the transmitter reacts to changes in the system. The response time is the time

the device takes to reach 63 % of the measured value. To smooth out unstable pressure fluctuations in applications,

select a longer response time.

1. Open the cover.

2. Press the zeroing button briefly.

The indicator light and display (-D models) indicate the selected response time.

Indicator light Display Response time

Three short flashes 0.8 0.8 seconds

Two long flashes 4.0 4 seconds

3. Close the cover.

Information is subject to change without prior notice. EN - 104.004.008ug

Published: 31.05.2023 9 (11)

4.4 Wiring

4-20 mA

10...35 Vdc

Wiring polarity is free.

4.5 Zeroing

The possible zero point drifting can be eliminated by using the zeroing button on the circuit board.

Note: Supply voltage must have been connected for one hour prior the zeroing.

1. Disconnect both pressure measurement hoses.

2. Push the zeroing button until the indicator light turns on.

The indicator light turns on approximately after 4 seconds.

3. Release the zeroing button.

Zeroing starts and the indicator turns off. The zeroing is complete when the indicator light flashes two times.

4. Connect the pressure measurement hoses.

Information is subject to change without prior notice. EN - 104.004.008ug

Published: 31.05.2023 10 (11)

5 Disposal

The device is considered as electrical and electronic equipment for disposal in terms of the applicable European

Directive. At the end of life the product must enter the recycling system at an appropriate collection point.

• The device must be disposed through channels provided for this purpose.

• The disposal must be completed according to the local and currently applicable laws and regulations.

Generally all metals can be recycled as material. Plastics and cardboard packaging material can be used in energy

recovery. Printed circuit boards need selective treatment according to IEC 62635 guidelines. To aid recycling, plastic

parts are marked with an appropriate identification code. Contact your local HK Instruments distributor for further

information on environmental aspects and recycling instructions for professional recyclers.

Information is subject to change without prior notice. EN - 104.004.008ug

Altri manuali per DPT-2W- 100-R2

Indice

Altri manuali HK Instruments Trasmettitore

HK Instruments

HK Instruments CDT Series Manuale utente

HK Instruments

HK Instruments DPT-IO-MOD Series Manuale utente

HK Instruments

HK Instruments CDT-MOD-2000 Series Manuale utente

HK Instruments

HK Instruments DPT-R8 Series Manuale utente

HK Instruments

HK Instruments RHT DUCT Series Manuale utente

HK Instruments

HK Instruments DPT-Flow Series Manuale utente

HK Instruments

HK Instruments CDT-MOD-2000 Series Manuale utente

HK Instruments

HK Instruments DPT2500-R8 Series Manuale di istruzioni

HK Instruments

HK Instruments AVT Series Manuale utente

HK Instruments

HK Instruments DPT-Ctrl-MOD Series Manuale utente

HK Instruments

HK Instruments RHT-MOD Duct Series Manuale utente

HK Instruments

HK Instruments DPT-Dual-MOD Series Manuale utente

HK Instruments

HK Instruments RHT-MOD Duct Series Manuale utente

HK Instruments

HK Instruments Siro-MOD Series Manuale utente

HK Instruments

HK Instruments RHT Series Manuale utente

HK Instruments

HK Instruments CDT2000 Series Manuale utente

HK Instruments

HK Instruments DPT-Priima Series Manuale utente

HK Instruments

HK Instruments RHT Series Manuale utente

HK Instruments

HK Instruments DPT-Dual-MOD Series Manuale utente

HK Instruments

HK Instruments SIRO Series Manuale utente

HK Instruments

HK Instruments DPT-Priima Series Manuale utente

HK Instruments

HK Instruments AVT Series Manuale utente

HK Instruments

HK Instruments DPT-Flow Series Manuale utente

HK Instruments

HK Instruments DPT-Flow-1000 Guida rapida

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente