HMS Anybus X-gateway Manuale utente

+$/067$'&+,&$*2.$5/658+(72.<2%(,-,1*0,/$1208/+286(&29(175<381(&23(1+$*(1

HMS Industrial Networks

Mailing address: Box 4126, 300 04 Halmstad, Sweden

Visiting address: Stationsgatan 37, Halmstad, Sweden

Connecting Devices

E-mail: [email protected]

Web: www.anybus.com

Anybus X-gateway

J1939 to Modbus Interface

User Manual

Part No.AB7612

For Firmware Revision 2.06.01 and Later

Manual Revision 1.20

Doc.Id. HMSI-168-25

Table of Contents i

Table of Contents

Preface......................................................................... iii

Important User Information ................................... iii

Related Documentation.......................................... iv

Anybus X-gateway Module Description ................ 1-1

Overview .................................................................... 1-1

Theory of Operation ................................................... 1-2

J1939 Features .......................................................... 1-3

Modbus Features ....................................................... 1-3

System Requirements ................................................ 1-4

Hardware Description................................................. 1-5

Installation................................................................ 2-1

Installation and Operation Requirements ................... 2-1

Power and Network Connector .................................. 2-2

Configuration Port Connector..................................... 2-4

Configuration ........................................................... 3-1

Anybus Configuration Tool (BWConfig) ..................... 3-1

Modbus Network Configuration .................................. 3-6

J1939 Network Configuration..................................... 3-7

J1939 I/O Configuration ........................................... 3-10

Modbus Interface..................................................... 4-1

Network Communication ............................................ 4-1

Supported Modbus Functions .................................... 4-2

Diagnostic Subfunctions............................................. 4-3

Modbus Addressing ................................................... 4-7

Diagnostic Registers .................................................. 4-9

Interaction with I/O Tables ....................................... 4-10

Example Application ............................................... 5-1

Scenario ..................................................................... 5-1

Modbus Network Configuration .................................. 5-2

J1939 Network Configuration..................................... 5-3

J1939 I/O Configuration ............................................. 5-4

Table of Contents ii

J1939 Interface......................................................... 6-1

Address Management ................................................ 6-1

Communications Methods.......................................... 6-2

Message Transmission .............................................. 6-3

Receiving Messages .................................................. 6-6

Transport Protocol for Large Messages ..................... 6-8

J1939 Diagnostic Messages ...................................... 6-9

Bus-Off Reset Option ............................................... 6-13

Offline Detection....................................................... 6-14

J1939 Baud Rate ..................................................... 6-17

Status and Diagnostics............................................. 7-1

Anybus X-gateway LEDs ........................................... 7-1

Status Codes.............................................................. 7-3

Specifications............................................................ 8-1

Environmental Specifications ..................................... 8-1

EMC Directive Compliance ........................................ 8-1

Electrical Specifications.............................................. 8-1

Mechanical Specifications .......................................... 8-2

I/O Data Sizes ............................................................ 8-3

Modbus Specifications ............................................... 8-3

J1939 Specifications .................................................. 8-3

Connectors................................................................ 9-1

Power and Network 15-Pin D-Subminiature............... 9-1

Configuration 25-Pin D-Subminiature......................... 9-2

Support ................................................................... 10-1

Preface iii

Preface

Important User Information

The data and illustrations found in this document are not binding. We reserve the

right to modify our products in line with our policy of product development. The

information in this document is subject to change and should not be considered as

a commitment by HMS Industrial Networks. HMS Industrial Networks assumes

no responsibility for errors that may appear in this document

There are many applications of the Anybus X-gateway module. Those responsible

for the use of this device must satisfy themselves that all necessary steps have

been taken to verify an application meets all performance and safety requirements

including any applicable laws, regulations, codes, and standards.

The illustrations and samples in this guide are intended solely for the purpose of

example. HMS Industrial Networks does not assume responsibility or liability for

actual use based upon the examples shown in this publication.

FAIL-SAFE OR CRITICAL OPERATIONS

This product is not designed, intended, authorized, or warranted

to be suitable for use or resale as control equipment in, or for

other applications related to, hazardous or potentially-hazardous

environments or applications requiring high-availability or fail-

safe performance, such as in the operation of nuclear facilities,

aircraft navigation or communications systems, air traffic con-

trol, life support, public works, weapons systems, or any other

application in which the failure of a product could lead to prop-

erty damage, death, personal injury, or environmental damage.

Preface iv

Related Documentation

Modbus is a trademark of Modbus.org.

Microsoft, MS-DOS, and Windows are trademarks of Microsoft Corporation.

Document Name Author Web Page

Modbus Protocol Specification Modbus-IDA www.modbus.org

J1939 Recommended Practice SAE www.sae.org

Table 1-1 Related Documentation

Chapter 1 Anybus X-gateway Module Description 1-1

Anybus X-gateway Module Description

Overview

The X-gateway J1939 to Modbus Interface (JMI) allows you to monitor and con-

trol data on a J1939 heavy duty vehicle network using a Modbus RTU master

device. Data from J1939 messages are mapped to I/O table locations, making

them addressable using standard Modbus read and write commands.

Examples of JMI applications:

• An interface used on a diesel generator package to access engine parame-

ters from a Programmable Logic Controller (PLC).

• An on-vehicle gateway used to interface the J1939 vehicle network to an

on board industrial automation based control system.

Anybus X-gateway Module Description 1-2

Theory of Operation

The JMI provides centralized data storage, the “PassageWayTM”, for data that is

shared between the J1939 and Modbus networks. Data is placed into the Passage-

Way by one network interface, allowing the data to be read through the other net-

work interface.

The JMI appears as a single device on either network using standard protocol

mechanisms. No special, or extended, protocol features are required of the devices

on either network to read and write the data flowing through the PassageWay; all

cross-network activity is transparent to the devices on either network.

Figure 1-1 JMI PassageWay Operation

Modbus RTU Network

J1939 Network

PassageWay

Input

Table

Output

Table

Receive PGNs

Send PGNs

Read Inputs

Write Outputs

Anybus X-gateway Module Description 1-3

J1939 Features

• Transmission and reception of all types of J1939 messages, including

PDU1, PDU2, broadcast and destination specific.

• Complete network address management including address claim, protec-

tion, and yield on higher priority conflict.

• Network address can be self-configurable over a range of addresses.

• J1939 Transport Protocol for transmission and reception of large mes-

sages (9 - 1785 bytes). Both connection based (RTS/CTS) and broadcast

(BAM) are supported.

• Configurable CAN bus-off reset option will reset the network interface

and attempt to return to online when a CAN bus-off condition is detected.

• Configurable diagnostic tables provide monitoring of J1939 diagnostic

messages for active and previously active diagnostics (DM1 and DM2).

Modbus Features

• Modbus RTU slave.

• RS-485 half-duplex (2 wire) serial interface.

• Configurable baud rates of 4800, 9600, and 19200 bps.

• Configurable for no, odd, or even parity and 1 or 2 stop bits.

• Support of all commonly used Modbus functions for reading and writing

I/O data and diagnostics.

• Overall module, Modbus, and J1939 status and diagnostics accessible

through Modbus diagnostic functions and addressable registers.

Anybus X-gateway Module Description 1-4

System Requirements

The following hardware and software components are needed to use the X-gate-

way J1939 to Modbus Interface.

Required Hardware

• Anybus X-gateway JMI module.

• J1939 network connection.

• Modbus RTU network connection.

• Modbus RTU master device.

• 24 VDC power connection

• PC to execute Anybus X-gateway Configuration Tool (BWConfig).

• RS-232 null-modem cable to connect PC running BWConfig to the JMI.

Optional Hardware

• DIN rail to mount the JMI.

Required Software

• Anybus Configuration Tool software (BWConfig) to configure the JMI.

For support of all features described in this manual, the revision of

BWConfig should be v1.6 or later.

• BWConfig requires that the PC be running Microsoft Windows 98, NT,

2000, or XP.

Anybus X-gateway Module Description 1-5

Hardware Description

The Anybus X-gateway J1939 to Modbus Interface has a 15-pin D-Subminiature

connector for power and network connections. This connector has pins for module

power, J1939 CAN connections, and Modbus RS-485 connections. See “Installa-

tion” Page 2-1 for details on using this connector.

A 25-pin D-Subminiature connector is provided for connection to a PC running

the Anybus Configuration Tool. This is a standard RS-232 DTE connection and

will require a null-modem cable (pins 2 and 3 swapped) to connect the module to

a PC serial port or USB serial adapter. See “Installation” Page 2-1 for details on

using this connector.

The front of the module has a set of 3 LEDs that are used for status indication.

These LEDs provide visual status for the overall module, the J1939 interface, and

the Modbus interface. See “Status and Diagnostics” Page 7-1 for details on how

the LEDs are used.

The back of the module has a DIN rail mount to allow the module to be mounted

on a DIN rail.

Altri manuali per Anybus X-gateway

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali HMS Portale

HMS

HMS Anybus Modbus to KNX Gateway Manuale utente

HMS

HMS Anybus-X Manuale utente

HMS

HMS Anybus 024380-C Manuale utente

HMS

HMS Intesis KNX HITACHI VRF Manuale utente

HMS

HMS Anybus X-Gateway Series Manuale utente

HMS

HMS Intesis INBACDAL1280200 Istruzioni per il montaggio

HMS

HMS Anybus-X AB7609 Manuale utente

HMS

HMS Anybus X-gateway Manuale utente

HMS

HMS Intesis INMBSPAN016O000 Manuale utente

HMS

HMS Netbiter EasyConnect Series Manuale utente

HMS

HMS Intesis INBACHIT O000 Series Istruzioni per il montaggio

HMS

HMS Intesis INBACSAM004O000 Manuale utente

HMS

HMS AnyBus-X J1939 Manuale utente

HMS

HMS AnyBus-X AB7607 Manuale utente

HMS

HMS Anybus Modbus-TCP/RTU Gateway Manuale utente

HMS

HMS Intesis IN776MHI00 O000 Series Istruzioni per il montaggio

HMS

HMS Anybus X-gateway AB7 Series Guida

HMS

HMS Anybus HMS-EN2MB-R Manuale utente

HMS

HMS Anybus X-gateway CANopen Manuale utente

HMS

HMS Intesis WMP Manuale utente

HMS

HMS Intesis INMBSOCP 0100 Series Istruzioni per il montaggio

HMS

HMS Anybus-X AB7609 Manuale utente

HMS

HMS Intesis IN485MHI001R000 Manuale utente

HMS

HMS Intesis KNX Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente

RTA

RTA 460MCBC-N2E Scheda tecnica