BASE STATION MENU FUNCTION INTRODUCTION
8
Select "Mic Options" and press "OK" button to enter the
secondary menu of Mic Settings
1
1.1. Select "Mic Type" and press "OK" button to enter the third-level menu of Mic
selection.
1.1.1. Select “Dynamic” and press "OK" button to switch to dynamic mic mode.
1.1.2. Select “Electret” and press "OK" button to switch to electret mic mode.
1.2. Select “Mic Gain” and press "OK" button to enter the third-level menu of Mic
gain control.
1.2.1. Select “+” and press "OK" button, when the gain increases, the beltpack will
hear more sound. Select "-" and press "OK" button. When the gain decreases, the
beltpack will hear less sound.
Select “4 Wire Setting” and press "OK" button to enter the
secondary menu of 4 wire audio setting
2
2.1. Select “Input Gain” and press "OK" button to enter the third-level menu of gain
adjustment.
2.1.1. Select “+” and press "OK" button, when the gain increases, the amplitude of
sound input on 4 wire input will increase. Select “-” and press "OK" button, when
the gain decreases, the amplitude of sound input on 4 wire input will hear less
sound.
2.2. Select “Output Gain” and press "OK" button，to enter the third-level menu of
gain adjustment.
2.2.1. Select “+” and press "OK" button, when the gain increases, the amplitude of
sound input on 4 wire input will increase. Select “-” and press "OK" button, When
the gain decreases, the amplitude of sound input on 4 wire input will hear less
sound.
