Hollyland Solidcom C1 HUB8S Manuale utente

Hollyland Solidcom C1 HUB8SV1.0.0

IntroductionThank you for purchasing Hollyland Full-duplex Wireless Intercom System.The Solidcom C1 HUB8S includes eight single-sided remote wireless headsets along with eight rechargeable batteries, a charger, a HUB base with wired headset, and accessories. It is a full-duplex wireless DECT intercom system engineered to provide clear audio and all-day wearing comfort in a true-wireless design with no beltpack required. The system operates in the 1.9GHz band, providing a reliable transmission range up to 1000ft (350m) radius (LOS). This Quick Guide will guide you through the installation and use of the equipment.

Solidcom C1 - HUB8S Headset Intercom Package①HUB Base 1 x②Remote Headset (with blue nameplate) 8 x④ Charging Case 1 x⑩High-gain Antennas 4 x③ 3.5mm HUB Headset (with red nameplate) 1x⑦ 12V/2A DC Adapter 2 x⑨ USB Type-A to Type-C Cable 1 x⑧Over-ear Cushion 9 x⑪ Storage Case 1 x⑫ Quick Guide 1 x⑬ Warranty Card 1 xNote: The amount of the items listed above depends on the edition.⑤①②③⑥⑦⑧⑨④⑥Microphone Cushion 9 xPacking List1

Product Interfaces①HUB Headset Volume Knob②Display④LEFT Arrow Key③UP Arrow KeyHUB Base InterfacesA⑤Menu/Conﬁrm Button - Long press to enter the main menu/press once to conﬁrm⑥DOWN Arrow Key⑦RIGHT Arrow Key⑧Join/Exit Group A Button for the 3.5mm HUB Headset - The indicator turns off when the HUB Headset exit Group A’s conversation, and turns on in orange after joining in⑨ 3.5mm Headphone Jack⑩Join/Exit Group B Button for the 3.5mm HUB Headset - The indicator turns off when the HUB Headset exit Group B’s conversation, and turns on in orange after joining inA⑫ANNOUNCE Button - Press and hold the button while making an ANNOUNCE, release the button when ﬁnished⑭Power Switch⑬RF Antenna Interface⑮DC Power Interface⑯ PGM Audio Input Interface⑰2-wire Audio Input & Output Interface⑱ RJ45 Network Port⑲4-wire Audio Input & Output Interface (RJ45 network socket)⑳ UAC InterfaceNP-F Battery Bay①②③④⑤⑥⑦

⑧⑨⑩⑪⑫⑬⑭⑱⑲⑳⑮⑯⑰

⑪USB Interface V-Mount/G-Mount Battery Plate (Subject to the actual product you purchased)2

Product Interfaces134567① Power/Connection Indicator② Microphone⑨ Power Button③ USB Type-C Interface - For ﬁrmware upgrade, and headset pairingHeadset InterfacesB⑤ Volume + Button⑥ Volume - Button⑦ A Button - Lights up when joined Group A, turns off when exited Group A; Long press for 5 seconds to pair⑧ B Button - Lights up when joined Group B, turns off when exited Group B④ Battery Compartment⑩ SpeakerB289103

Product Interfaces① Charging Indicator Orange: Charging in progress Green: Fully charged② Charging ContactCharging Case Interfacesc②③①c③DC Charging Interface4

Quick Start GuideSet Up HUB BaseInstall the HUB antennas.Power Up HUB BaseConnect the 12V/2A DC Adapter to the HUB base.Press the Power Switch to turn on.Note: The HUB Base can be powered using NP-F battery, V-Mount/G-Mount battery, or DC power supply.5

Quick Start GuideInstall Headset BatteryTurn On HeadsetNote: The indicator light stops ﬂashing and turns to static green when the HUB Base and the Remote Headset(s) are successfully connected.Mute/Unmute MicrophoneMute/Unmute the headset’s microphone by moving the mic boom up/down.1.Move the mic boom up to the MUTE position that makes a CLICK sound, and the HUB Base’s interface displays "MUTE" corresponding to the headset status.2.Move the mic boom down to the TALK position that makes a CLICK sound, and the HUB Base’s interface displays "TALK" corresponding to the headset status.

TALKMUTE

Stop-point

The device is now ready for use.MUTETALK6Step 1: Slide the battery compartment cover lockStep 2: Open the coverStep 3: Place the battery into the compartment and close the battery coverNameplatePower SwitchPower up the Headset

①HUB Base conﬁguration - Master/Slave②HUB Base battery levelHUB Base Main Display Interfaces③Headset signal strength④Headset battery level - turns red in low battery⑤Headset number⑥Headset status TALK: Headset is active to hear and talk MUTE: Headset is muted to hear only LOST: Headset lost connection with HUB Base⑦Network connection status⑧ WiFi status①②③④⑤⑥

⑧

⑦Quick Start Guide7Master

Quick Start GuideHeadset Status Indicator①FLASH GREEN: Headset disconnected②STATIC GREEN: Headset connection successful③FLASH RED: Low battery, please change the batteryPairing OperationThe HUB Base and Remote Headsets that come in one system package will auto pair up right out of box. Manual pairing is only required when there is a need for adding or changing headset or HUB base to the system.Connect the HUB Base and the Headset with a USB-C Cable.Pairing requires a USB-C cable.Connect one end to the USB interface on the HUB Base’s front panel, and the other end to the USB-C interface of the headset. The HUB Base screen will display the Select Number interface. Locate the designed headset number with the arrow keys, and press the round Menu/Conﬁrm Button to complete number setting and pairing.8

Indice

Altri manuali Hollyland Sistema di interfono