Honeywell THOR VM1 Manuale utente

Thor VM1 Field Replaceable Front Panel

The front panel of the Thor VM1 is field replaceable. The front panel assembly contains the keyboard, touchscreen and optional

defroster. Should any of these components fail, the front panel assembly can easily be replaced to minimize downtime. The replacement

front panel is available in several configurations.

Requirements - User Supplied

• Torquing tool capable of measuring inch pounds

• #2 Phillips screwdriver bit

Replacing Front Panel

1. If the Thor VM1 has a Windows CE operating system, place the Thor VM1 in Suspend by pressing the Power button on the front of

the Thor VM1. If the Thor VM1 has a Windows Embedded Standard operating system, select Shut Down from the Windows Shut

Down menu.

2. Remove the Thor VM1 from the Quick Mount Smart Dock by pulling

down on the red quick release handle, lifting the bottom of the Thor VM1

away from the dock, and lifting the Thor VM1 up and away from the

dock.

3. Place the Thor VM1 face down on a clean, well lit stable surface.

4. Use a #2 Phillips bit to loosen the captive M3 screws

on the tethered access panel with the SIM label.

SIM Label

5. Remove the tethered access panel from the opening and press the UPS battery disconnect button located

just below the SIM card installation slot.

6. Reinstall the access panel cover. Torque the M3 screws to 4-5 inch pounds using a #2 Phillips bit.

7. Turn the Thor VM1 face up.

8. Use a #2 Phillips bit to loosen the fourteen (14) captive

M3 screws that hold on the front panel.

9. Carefully lift the front panel away from the device.

11 12

13 14

10. Position the replacement front panel so the tab on the back of the front panel lines up with the slot on the Thor VM1. Be sure the two

wiring connectors are also aligned.

11. Gently press the front panel into place.

12. Tighten the fourteen (14) captive M3 screws in the order shown in the figure for step 8 above. Use a #2 Phillips bit and torque the

screws to 6-7 inch pounds.

13. Reinstall the Thor VM1 in the dock. When the Thor VM1 is placed in the powered dock, the UPS battery automatically reconnects.

14. Press the Power button on the front of the Thor VM1.

15. The Thor VM1 automatically recognizes any change in keyboard configuration.

16. If the Thor VM1 has a Windows CE operating system and the defroster configuration has changed, use the Test button on the

Peripherals control panel to update the Thor VM1's configuration. Select Start > Settings > Control Panel > Peripherals and tap

the Test button.

17. The Thor VM1 is ready for use.

Thor VM1 with Front Panel Removed Back of Thor VM1 Front Panel

Slot Wiring Connector

TabWiring Connector

Altri manuali per THOR VM1

Indice

Altri manuali Honeywell Pannello di controllo

Honeywell

Honeywell HPZC10 Series Manuale utente

Honeywell

Honeywell Gamewell Flex 402 Manuale utente

Honeywell

Honeywell NOTIFIER NFW-50X Manuale utente

Honeywell

Honeywell SLC Manuale utente

Honeywell

Honeywell NOTIFIER NFW-50X Manuale utente

Honeywell

Honeywell IFP-75 Manuale utente

Honeywell

Honeywell Notifier SFP-2402 Manuale utente

Honeywell

Honeywell Gamewell-FCI GWF-7075 Manuale utente

Honeywell

Honeywell TotalZone TZ-4 Manuale operativo

Honeywell

Honeywell Vigilon Plus Manuale utente

Honeywell

Honeywell Fire-Lite MS-5UD-3 Manuale utente

Honeywell

Honeywell Silent Knight IFP-2000 Module 3 Manuale utente

Honeywell

Honeywell NOTIFIER AM-8200 Manuale del proprietario

Honeywell

Honeywell Notifier NFS-320 Manuale tecnico

Honeywell

Honeywell 6820 Manuale utente

Honeywell

Honeywell Fire-Lite Alarms ES-200X Manuale utente

Honeywell

Honeywell Fire-Lite Alarms MS-9200 Manuale utente

Honeywell

Honeywell IFP-2100ECS Specifiche tecniche

Honeywell

Honeywell MRP-2002 Manuale utente

Honeywell

Honeywell NOTIFIER SLC Manuale utente

Honeywell

Honeywell Farenhyt Series Manuale utente

Honeywell

Honeywell nfs2-3030 Manuale utente

Honeywell

Honeywell AQ252 Series Manuale utente

Honeywell

Honeywell IFP-2100 Specifiche tecniche

Manuali Pannello di controllo popolari di altre marche

RDZ

RDZ PC-HRX Manuale utente

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Manuale tecnico

Efka

Efka Variocontrol V810 Manuale utente

Cebora

Cebora 208-10 Manuale utente

AMX

AMX AutoPatch CP-15 Manuale utente

Satel

Satel CA-6 KLED-S Manuale utente

Evolution

Evolution IQ plus 800 Manuale utente

Fagor

Fagor 8040 TCO CNC Manuale utente

Trane

Trane ComfortLink II XL950 Control Manuale utente

AKO

AKO PROCool AKO-17635-2 Manuale utente

ABB

ABB 6136/30M-101 Manuale utente

Telikou

Telikou BK-603 Belt Pack Manuale utente

Mapei

Mapei Mapeheat Thermo Touch Manuale utente

Bosch

Bosch D9412GV4 Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Manuale utente

Sminn

Sminn BOX L VF1L EI Manuale utente

Balboa

Balboa TP600 Manuale utente

Nice

Nice HSCU1 Specifiche tecniche