Honeywell Mesh Router Manuale utente

Honeywell Mesh Router™

Wireless Range Extender and Deployment Tool

Table of Contents

Safety 6

Standard Contents 12

General Information 14

Key Features 16

Physical Description 18

LCD Display (Monitoring) 19

Specifications 21

Operation 23

Turning the Mesh Router On 23

Turning the Mesh Router Host Off 25

Battery Indicator 25

Button Functions 27

Backlight 27

Deploying Mesh Routers 29

With TPPLW Controller 29

With Portable Monitors 30

Programming the Mesh Router 31

LCD Contrast 34

Serial Number 35

Firmware Version 36

Factory Reset 36

Edit Password 38

Exit 39

Wireless 40

Mesh Router 3 User Manual

“Panic” Function 47

Enabling/Disabling The “Panic Button Function 47

Using The “Panic” Function 49

Internal Battery Replacement 53

Troubleshooting 55

Mesh Router Alarm Signal Summary 57

Year Of Manufacture 59

Appendix A: Mesh Router External Battery Replacement 61

External Battery Usage 62

External Battery Replacement Process 64

Appendix B: Installation 65

Magnet-Mount Installation 65

Fixed Installation 66

Magnetic Mount Alternative Installation 69

Mesh Router 4 User Manual

Safety

Product Registration

https://sps.honeywell.com

By registering your product, you can:

lReceive notification of product upgrades or enhancements

lBe alerted to training classes in your area

lTake advantage of special offers and promotions

Mesh Router 6 User Manual

WARNINGS

This Manual must be carefully read by all individuals who have or will have the responsibility of

using, maintaining, or servicing this product. The product will perform as designed only if it is

used, maintained, and serviced in accordance with the manufacturer’s instructions. The user

should understand how to set the correct parameters and interpret the obtained results.

For safety reasons, this equipment must be operated and serviced by qualified personnel only.

Read and understand the user manual completely before operating or servicing.

AVERTISSEMENT

Pour des raisons de sécurité, cet équipment doit être utilisé, entretenu et réparé uniquement

par un personnel qualifié. Étudier le manuel d’instructions en entier avant d’utiliser, d’entretenir

ou de réparer l’équipement.

Read Before Operating

This manual must be carefully read by all individuals who have or will have the responsibility of

using, maintaining, or servicing this product. The product will perform as designed only if it is

used, maintained, and serviced in accordance with the manufacturer’s instructions. The user

should understand how to set the correct parameters and interpret the obtained results.

CAUTION!

To reduce the risk of electric shock, turn the power off before opening this instrument or

performing service. Never operate the instrument when the instrument is open. Service this

product only in an area known to be non-hazardous.

WARNING!

Use only the Lithium battery or external rechargeable battery provided by Honeywell. This

instrument has not been tested in an explosive gas/air atmosphere having an oxygen

concentration greater than 21%. Substitution of components may impair suitability for intrinsic

safety. Replace batteries only in non-hazardous locations.

STATIC HAZARD: Clean only with a damp cloth. For safety reasons this equipment must be

operated and serviced by qualified personnel only. Read and understand instruction manual

completely before operating or servicing. Any rapid up-scale reading followed by a declining or

erratic reading may indicate a gas concentration beyond upper scale limit, which may be

hazardous.

Mesh Router 7 User Manual

Intrinsically Safe Marking

Cl. I, Div. 1, Gr A, B, C, D T4

Ta = -40° C to +50° C

IECEx SIR 18.0066X

Sira 18ATEX2251X

II Ex ia IIC T4 Ga

IM1 Ex ia I Ma

2460

Ui = 3.6V, Ci=78µF, Li/Ri=3.5µH/ohm

WARNING!

Substitution of components may impair suitability for intrinsic safety. Replace batteries only in

non-hazardous locations.

WARNING!

To prevent ignition of flammable or combustible atmospheres, disconnect power before

servicing.

Hazardous Areas Classified By Zones

Mesh Router is intended to be used in hazardous areas or mines susceptible to firedamp

classified zone 0, zone 1 or zone 2, within the temperature range of -40º C to +50º C, where

gases of explosion groups IIA, IIB or IIC and T4 may be present.

Hazardous Areas Classified By Divisions

Mesh Router is intended to be used in hazardous areas classified for Class I Div. 1 or 2, within

the temperature range of -40º C to +50º C, where gases of explosion groups A, B, C or D and

temperature class T4 may be present.

Instruction For Safe Use

Strictly follow the instructions for safe use. Application of the Mesh Router requires full

understanding and strict observation of the instructions.

Mesh Router 8 User Manual

Use In Hazardous Areas

Equipment which is intended for use in explosive atmospheres and which has been assessed

and certified according to international regulations may be used only under specified

conditions. The components may not be modified in any way.

The appropriate regulations for service and repair must be properly observed during such

activities.

Proper Product Disposal At End Of Life

EU Directive 2012/19/EU: Waste Electrical and Electronic Equipment (WEEE)

This symbol indicates that the product must not be disposed of as general industrial

or domestic waste. This product should be disposed of through suitable WEEE

disposal facilities. For more information about disposal of this product, contact your

local authority, distributor, or the manufacturer.

Wireless Security Warning

Wireless data transmission can extend beyond your walls and can be received by anyone with a

compatible adapter. Without proper protection, data can be compromised. Use the security

features of all wireless equipment in your network.

lBluetooth communication should always be set to OFF unless the functionality is

required.

lIf possible, pair devices ONLY when in a physically secure area.

CAUTION!

This device complies with Part 15 of the FCC Rules / Industry Canada license-exempt

RSS standard(s). Operation is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radio exempts de licence. L'exploitation est autorisée aux deux conditionssuivantes : (1)

l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur del'appareil doit accepter

tout brouillage radioélectrique subi, même si le brouillage estsusceptible d'en

compromettre le fonctionnement.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Mesh Router 9 User Manual

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

lReorient or relocate the receiving antenna.

lIncrease the separation between the equipment and receiver.

lConnect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

lConsult the dealer or an experienced radio/TV technician for help.

Under Industry Canada regulations, this radio transmitter may only operate using an

antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry

Canada. To reduce potential radio interference to other users, the antenna type and its

gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not

more than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio

peutfonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur)

approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de

brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type

d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.)

ne dépasse pas l'intensité nécessaire à l'établissement d'une communication

satisfaisante.

FCC Part 15 Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Mesh Router 10 User Manual

Indice

Altri manuali Honeywell Hardware di rete

Honeywell

Honeywell MAXPRO NVR SE Manuale utente

Honeywell

Honeywell Notifier NFN-GW-EM-3 Manuale utente

Honeywell

Honeywell MAXPRO NVR SE Manuale utente

Honeywell

Honeywell MAXPRO NVR SE Series Manuale utente

Honeywell

Honeywell nfs2-3030 Manuale tecnico

Honeywell

Honeywell VARIODYN D1 Manuale utente

Honeywell

Honeywell LonWorks protocol Manuale utente

Honeywell

Honeywell MAXPRO NVR 3.1 Manuale utente

Honeywell

Honeywell 057810 Manuale utente

Honeywell

Honeywell MAXPRO PE Manuale utente

Honeywell

Honeywell MAXPRO NVR SE Manuale utente

Honeywell

Honeywell HN300401 Series Manuale utente

Honeywell

Honeywell hus-nvr-1032-e Manuale utente

Honeywell

Honeywell HN350401 Series Manuale utente

Honeywell

Honeywell MAXPRO NVR Hybrid SE Manuale utente

Honeywell

Honeywell Rae SensorRAE 4R+ Manuale utente

Honeywell

Honeywell Embedded NVR Manuale di istruzioni

Honeywell

Honeywell MAXPRO NVR PE Manuale utente

Honeywell

Honeywell 2450Cm Series Manuale utente

Honeywell

Honeywell FUSION STREAMER Manuale utente

Honeywell

Honeywell HPM Istruzioni per il montaggio

Honeywell

Honeywell HDCD8TP Manuale utente

Honeywell

Honeywell MIWI350 Manuale utente

Honeywell

Honeywell MAXPRO 2.5 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente