Honeywell SUGPACK-UK Manuale utente

800-19460-C

10/2015

-English-

Le Sucre™

Quick Installation guide

MANDATORY STEPS TO FOLLOW BEFORE BEGINNING

YOUR INSTALLATION ................................................................2

Panel Identification.............................................................................................2

STEP 1: Connecting Le Sucre...........................................................................3

STEP 2: Creating your account on Internet......................................................5

INSTALLING YOUR SYSTEM .....................................................6

Registering the « Badge Reader » or the keypad ............................................9

Registering the badges....................................................................................13

Registering the Door Contact..........................................................................13

Registering the motion sensor........................................................................14

Installing other peripherals..............................................................................16

Finalizing the installation.................................................................................16

Le Sucre pre-configured parameters ......................................16

MANDATORY STEPS TO FOLLOW BEFORE BEGINNING YOUR

INSTALLATION

Panel Identification

Please be sure to identify the type of panel you have as some slight differences exist in the installation

process from one version to another.

Sucre GPRS (SUGPACK-EU/SUGPACK-UK)

Sucre Box (SUEPACK -E)

Sucre Box+ (SUEPACK-EG)

STEP 1: Connecting Le Sucre

Sucre GPRS

A help video can be found here:

http://honeywell.total-connect.eu/video/lesucre.mp4

Sucre Box

A help video can be found here:

http://honeywell.total-connect-eu/video/sucrebox.mp4

Sucre Box+

A help video can be found here:

http://honeywell.total-connect-eu/video/sucreboxplus.mp4

STEP 2: Creating your account on Internet

1. Logon to the website https://tc20e.total-connect.eu

2. Click on “Create user” to create your account. You will then be asked to enter a 20 digit long ID

code. This code is printed on a sticker located on Le Sucre.

3. You will then be able to choose your username and password used to login the system. You

will also be asked to enter a valid email to be contacted in case of problem or forgotten

password.

All fields with * are mandatory.

Once you have completed the form, check the case at the bottom of the page to agree to the Terms and

conditions and click on “Next”.

The following message then appears: « Your account has been sucessfully activated ». Clik on the blue

button to continue.

A confirmation email will be sent to you reminding your login and password for the website.

Some information regarding the specificities of your system will also be given. If you haven’t

recived the email please check in the Spam directory also.

Now you can log in you account through the main page of the website.

INSTALLING YOUR SYSTEM

After logging in, the following message then appears:

1. The first step is to set your contacts: these are the people who will be notified by email or SMS

when an alarm or a problem occurs in your premises.

Up to three contacts can be set up. The first contact is usually yourself and is mandatory. The

second and third contacts are optional and can be skipped during the installation. You will be able

to modify these contacts at any time after the initial installation.

You have to use the international format when entering the contacts’ phone numbers. Example:

number starting with +44 for the UK or +33 for France.

2. Depending on your panel, you may have to enter a phone number corresponding to the SIM card

supplied with your system

You have to use the international format when entering the SIM card phone number.

After following the different steps on the screen, the connection with Le Sucre™ begins

The connection may take several minutes. Once the connection is established you will see the green icon

at the top right of the page: .

The system is now in the installation mode

3. Wait for Le Sucre™ to be recognized by the Website and to be displayed on the screen as

shown below :

You can now start to install your devices and sensors:

Registering the « Badge Reader » or the keypad

1. Badge reader

A help video can be found here:

http://honeywell.total-connect.eu/video/SPR-S8EZ.mp4

The badge reader plays a series of beeps and then 3 fast beeps. The Website shows the detection of the

new peripheral with the message in the upper strip: ”New Devicel incoming… ”

Wait for the badge reader to appear in the “Sensors and peripherals” section as shown below:

Set the location and the name you want to give to it : here the name is “Keypad” and the location is

“Entrance”.

Warning : To validate the name field you have to click elsewhere on the screen with the mouse.

The badge reader is now saved and registered on your system.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Honeywell Sistema di sicurezza

Honeywell

Honeywell VISTA-128BPT Istruzioni per il montaggio

Honeywell

Honeywell LYNX Touch Series Istruzioni per il montaggio

Honeywell

Honeywell ADEMCO LYNXRIEN-EA Manuale utente

Honeywell

Honeywell VISTA-128BPT Manuale utente

Honeywell

Honeywell L5200 Series Manuale utente

Honeywell

Honeywell ADEMCO VISTA SERIES Manuale utente

Honeywell

Honeywell ADEMCO VISTA 10P Manuale utente

Honeywell

Honeywell VISTA-128FBPT Manuale utente

Honeywell

Honeywell 013002 Manuale utente

Honeywell

Honeywell DIY Smart Home Manuale utente

Honeywell

Honeywell LYNX TOUCH L5200 Manuale utente

Honeywell

Honeywell ADEMCO 5809 Istruzioni per il montaggio

Honeywell

Honeywell NETAXS NX4L1 Manuale utente

Honeywell

Honeywell AlarmNet 360 Guida di riferimento

Honeywell

Honeywell Domonial Manuale utente

Honeywell

Honeywell Ademco 8132-i Manuale utente

Honeywell

Honeywell ADEMCO VISTA-15PSIA Istruzioni per il montaggio

Honeywell

Honeywell SEF8MS Manuale utente

Honeywell

Honeywell LYNX Touch Security System Manuale utente

Honeywell

Honeywell ADEMCO 6150V Manuale utente

Honeywell

Honeywell Le Sucre Manuale utente

Honeywell

Honeywell System 1500e Manuale utente

Honeywell

Honeywell FBII OMNI 600 Manuale utente

Honeywell

Honeywell LXL-1000 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente