HP Integrity rx8620 Manuale utente

HP AB322A 4 GB DIMM Installation Guide

Part No.: AB322-96001 1

HP AB322A 4 GB DIMM Installation Guide

IMPORTANT Configuration restrictions apply.

4 GB DIMMs cannot be mixed with any other sized DIMMs on the same cell board.

However, 4 GB DIMMs can be mixed with other sized DIMMs within the same

nPartition as long as they are not mixed on the same cell board.

NOTE hp Integrity rx7620/rx8620 servers running Microsoft Window Server 2003 currently

do not support 4 GB DIMMs.

Minimum Operating System Versions

rp7420/rp8420:

HP-UX 11.11 HWE 0406

rx7620/rx8620:

HP-UX 11.23 HWE 0403

Linux Rhel 3 update 2

Firmware Requirements

Before installing 4 GB DIMMs on hp 9000 rp7420 and hp 9000 rp8420 servers, the server must be updated to

rp7420/rp8420 firmware version 2.0 or higher. To verify that version 2.0 is installed, run the MP sysrev

command and verify firmware and programmable hardware versions using Table 1.

For hp Integrity rx7620 and hp Integrity rx8620 servers, the server must be updated to rx7620/rx8620

firmware version 2.0 or higher. To verify that version 2.0 is installed, run the MP sysrev command and

verify the firmware and programmable hardware versions using Table 1.

READ ME FIRST

HP AB322A 4 GB DIMM Installation Guide

The Firmware Update Release Notice is included in the download bundle and includes the upgrade

instructions.

To download the Firmware Update Release Notice and firmware patch, go to one of the applicable web sites

listed.

For rp7420/rp8420:

Internal web site

ftp://hpatlse.atl.hp.com/firmware_patches/hp/cpu Download PF_CRAIMED0200.tar.gz

External web site

ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu Download PF_CRAIMED0200.tar.gz

For rx7620/rx8620:

Internal web site

ftp://hpatlse.atl.hp.com/firmware_patches/hp/cpu Download PF_COLYEIG0200.tar.gz

External web site

ftp://ftp.itrc.hp.com/firmware_patches/hp/cpu Download PF_COLYEIG0200.tar.gz

Table 1 Firmware and Programmable Hardware Versions

rp7420/rp8420 rx7620/rx8620

FIRMWARE

Core IO Master A.005.022 A.005.021

Core IO Slave A.005.022 A.005.021

Cell PDHC A.003.014 A.003.014

Cell SFW 21.3 1.015

PROGRAMMABLE HARDWARE

System Backplane GPM 1.002 1.002

System Backplane FM 1.002 1.002

System Backplane OSP 1.002 1.002

PCI-X Backplane LPM 2.000 2.000

PCI-X Backplane HS 1.000 1.000

Core IO Master 2.008 2.008

Core IO Slave 2.008 2.008

Cell LPM 1.002 1.002

Cell PDHC 1.006 1.006

HP AB322A 4 GB DIMM Installation Guide

Part No.: AB322-96001 3

NOTE Failure to upgrade firmware might result in error messages displayed during the boot process.

Installing the 4 GB DIMMs

1. Follow proper procedures to shut down the operating system.

2. Remove the right side cover.

3. Power off the cell board using the PE command in the MP menu.

4. Verify that the green power LED on the cell board is off before removing the cell board.

5. Press each extraction lever and move the slide to the unlock position.

6. Pull out on each lever to unseat the cell board.

7. Slide the cell board from the chassis and place it on a flat, ESD surface.

8. Remove the DIMM cover.

9. Using both DIMM extraction tools (A5201-68005), place the grooved side of each tool on each side of the

target DIMM.

10. Seat the tool tips down to limit, then leverage connector latches outward to unseat the DIMM from the

memory slot.

11. Orient the replacement DIMM connector key over the memory slot.

12. Using the DIMM installer tool (A5201-68003), press the DIMM downward evenly to seat the DIMM into

the memory slot. Repeat for each additional DIMM to be installed.

NOTE For best performance, the DIMMs should be installed in the following sequence: 0A-0B-1A-1B,

2A-2B-3A-3B, 4A-4B-5A-5B, 6A-6B-7A-7B.

13. Replace the DIMM cover.

14. Replace the cell board into the server. Ensure that the cell board is securely seated and both extraction

levers are in the locked position.

15. Power on the cell board using the PE command in the MP menu.

16. Replace the right side cover.

17. Power on the server and check that all memory is present. For example:

For PA-RISC servers boot to the BCH prompt and issue the IN ME command.

For IPF servers boot to the EFI shell and issue the info mem command.

18. Follow proper procedure to boot the operating system.

Altri manuali per Integrity rx8620

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali HP Hardware per computer

HP OmniBook 3100 Manuale utente

HP M8201R Manuale utente

HP E8402A Guida alla risoluzione dei problemi

HP QUERY Manuale utente

HP Wireless USB Network Adapter hn215w Manuale utente

HP MCS G2 Guida all'installazione

HP Xw4600 - Workstation - 2 GB RAM Manuale utente

HP Kayak XU04 Manuale dell'operatore

HP rp7420 Manuale utente

HP NVIDIA Tesla M2070Q Manuale utente

HP Smart Array P400 Istruzioni utente

HP P Class 450/500/550/600/650/700/750 Manuale

HP A58 0AF Series Istruzioni per il montaggio

HP 3000 III Series Manuale utente

HP AF079A Guida all'installazione

HP HPE SimpliVity 325 Manuale utente

HP Smart Array P400 Istruzioni utente

HP CB001A Manuale utente

HP JG587A Manuale utente

HP Adaptec ultra p2280a Manuale utente

HP Xw460c - ProLiant - Blade Workstation Manuale utente

HP E5000 Manuale utente

HP P Class 450/500/550/600/650/700/750 Manuale

HP t628 Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente